Is there any pan/tilt systems where the the servo doesn't stick out the bottom?
are there any pan/tilt systems where the base doesn't have the
Panning servo sticking out at the bottom?
I want to lay the complete setup on a flat surface.....
can anyone give me links or chime in ....
the servo isn't below the base.....
I like to buy this one but, I prefer a USA vendor.....
I built a reversed variant of pan mechanism, for the same reason as you.
Not handy to make pictures, but I'll try to explain.
I am using a 4 arms cross servo arm, mounted on the canopy base, and camera mount was built around the servo case. So, the arm is fixed and the servo is the one who moves. The tilt servo was glued to the pan servo, and tilt done using a rod.
Something close can be found here:
but mine is smaller, no trasnmitter mount, tilt servo is glued to pan servo.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Are there any Head Tracker that doesn't drift?||rclab1||FPV Talk||16||Aug 03, 2010 09:42 AM|
|Discussion||Pan and Tilt on a GWS Servo||Cralis||FPV Talk||24||Jul 01, 2010 02:55 PM|
|Discussion||Eagle Eyes Pan/Tilt servo supply||Peter Seddon||Eagle Tree Systems||9||Jun 24, 2010 10:54 PM|
|Discussion||Best Pan Tilt, Best pan tilt servos???||justind123||FPV Talk||19||Feb 26, 2010 08:42 AM|
|Discussion||smoothing out the pan / tilt servo||lupy||FPV Talk||4||Sep 09, 2007 09:18 PM|