XPS Module for Airtronics M8 - RC Groups
Thread Tools
Jul 11, 2010, 02:05 PM
Registered User
Discussion

XPS Module for Airtronics M8


A friend of mine purchased your system for a 3PKS and he likes the speed and performance. The Spektrum module in my M8 has been glitching lately and I thought I would give the XPS system a try. Has anyone run this combo before?
Sign up now
to remove ads between posts
Jul 12, 2010, 02:12 PM
We have many top drivers, including Dillon Rodriguez using our radio system in professional competitions. Dillion uses the the 3PK transmitter, but several others use their M11 (same module as the M8).
Jul 12, 2010, 09:46 PM
Registered User
How durable are the receivers?
Jul 13, 2010, 12:41 AM
They have a lifetime warranty.
Jan 28, 2017, 12:24 AM
Registered User
If I were to purchase the current M8 module, does it come with a receiver? If not, can you provide a link to a 3 channel receiver?
Jan 28, 2017, 11:36 AM
We do not make 3 channel receivers. Car and boat drivers use our Nano receivers.
Jan 16, 2018, 02:10 PM
Registered User

Sanwa M8 2.4Ghz Module and Receiver


hi, Jim,

I have a M8, like to convert to 2.4Ghz, and been searching a suitable module. It comes (1) Spektrum SM1001 Pro+SR3001 Pro, (2) XPS system, but XPS seems stable in market.
I need to know if I buy XPS via your site directly? What is the price range for combo (2.4Ghz moduel+receiver)? what is the price range for receiver (if as you stated early, use nano receiver)?

i saw a post as below, does it still valid?
******************
2.4GHz M8/M11 combo pack w/3 channel receiver Details
XtremeLink® combo package consisting of one XtremeLink® transmitter module for Airtronics M8 or M11 surface radios, and one 3 channel XtremeLink® surface receiver.

List Price: $189.00
Price: $149.00
********************

Henry
Jan 16, 2018, 04:53 PM
Registered User
Quote:
Originally Posted by JimDrew
We do not make 3 channel receivers. Car and boat drivers use our Nano receivers.
Where is receiver design going? I have been writing an article on the progress of radio control progress since I started flying RC in 1956 and an ending with the following speculation:
The extremely small receivers now available allow giant scale models mount separate receivers near remote servos and only need power leads from the servo to the battery. Is the next step building the receiver into the servo? The only real problem would be designing an antenna.
Any comments
Jan 16, 2018, 09:05 PM
I would prefer if our receivers transitioned into what the RFU is, and that is a single wire (with power/ground) that is sent to a servo driver board. We know that getting everything away from the receiver yields the highest success.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Airtronics M8 Mini-Z Module (27MHz) Mujahid Cars - Cars and Parts (FS/W) 0 May 07, 2008 01:33 AM
Sold Airtronics M8 with Spektrum module graham94 Cars - Cars and Parts (FS/W) 2 Feb 18, 2008 11:38 AM
Discussion Airtronics M8/M11 module JimDrew Xtreme Power Systems 0 Jul 14, 2007 08:54 PM
For Sale Synthesized Module and Reciever for Airtronics M8 27hz jlandry Cars - Cars and Parts (FS/W) 0 Jul 23, 2006 04:01 PM
For Sale Novak synthesized module and receiver for Airtronics M8. jtn Cars - Cars and Parts (FS/W) 1 Jan 24, 2006 12:16 PM