Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 08, 2010, 03:00 AM
pembo400 is offline
Find More Posts by pembo400
Registered User
New Product

X-43A form HobbyCity


hey guys just got a x-43A 64mm edf from hobbking, the construction was fairly simple and only took about 2 hours to build. The foam seams to be good quality but the black paint comes of easily with tape . so far the radio gear seems to be good and have had no problems while setting up and testing the servos range of movement.
Last edited by pembo400; Jul 09, 2010 at 06:03 PM.
Sign up now
to remove ads between posts
Old Jul 09, 2010, 02:35 PM
rob737 is offline
Find More Posts by rob737
Registered User
that's a neat looking jet (it caught my eye too while browsing hk). i did not know anything about this aircraft so i did some research on it. interesting to have it as a model. please let us know how it flys!

good luck........rob
Old Jul 09, 2010, 06:12 PM
pembo400 is offline
Find More Posts by pembo400
Registered User
hey rob just finished the test flight. The takeoff was reasonably short and used just a bit less than a cricket pitch. once she was up she was climbing pretty steadily at about 45'. she rolls well and really gets moving if you go flat out. the landing was easy on the grass and pretty smooth i didn't try a loop because their was a bit of wind a wasn't sure if she could pull it off but will hopefully try next time.

will try get some video
Old Jul 09, 2010, 06:26 PM
ApexAero is online now
Find More Posts by ApexAero
Aka: Tom Jenkins
ApexAero's Avatar
Not to troll but I was wondering how to power a surfboard or paper plane type with an edf.
Old Jul 09, 2010, 10:21 PM
j3tman is offline
Find More Posts by j3tman
Were..is..my..Super..Suit ..
j3tman's Avatar
Sweat to here about the maiden!! What is the stock performance like?

j3tman,
Old Jul 09, 2010, 11:52 PM
pembo400 is offline
Find More Posts by pembo400
Registered User
j3tman all the gear was stock with no mods


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New X-43A scramjet edf from HobbyKing kelloggair Foamy EDFs 6 Jun 28, 2010 12:31 PM
Discussion NBSC Membership form download.. Psionic001 Australia 0 Oct 29, 2009 01:48 AM
Discussion Tail form truffaldino Modeling Science 35 Oct 05, 2009 02:03 AM
Discussion Seagull Problem no support reply form support TorZel Eagle Tree Systems 13 Sep 20, 2009 12:15 AM