Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 01, 2010, 05:02 PM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Discussion

Scale Rc Zodiac RHIB - inflatable


Hey all, in one of these threads I happened to see a post from someone name Jerryj who had mentioned that he knew of a company called Bandit Boats in BC who used to make a pretty good inflatable hull.

Well, as he said, that company has been out of business for years. Anyway, I had purchased one of these hulls a while ago and had scaled it out with a G.I. Joe scale Coast Guard figure. The design I chose was based on a Coast Guard inflatable that was moored here in Queens NY. I took pictures of it and from the pictures went on to construct the superstructure out of fiberglass, plasti-struck - comprised of various sizes of rods and flat cut-outs.

It is approx. 40 inches, weighs approx 6lbs (fully loaded), has a (rare) scale outboard motor system, which are non-functioning but are in the fact the rudders, has a tradional 3/16" flex single screw drive (hidden by the scale outdrives), a Fine Design brushless geared drive system, a Castle Creations 120 Hydra forward/Reverse esc, powered by two 5S 4000 mah lipos, scale-out interior, working interior dome light, working emergency lights, headlights and horn, and while at rest it is on an authentic scaled down model of an actual EZ-Loaded trailer designed by the EZ-Loaded trailer company over 20 years ago and given to the EZ-loaded trailer dealers as a means to display what the real one looks like.

I have several pics from my build and will put a build thread together this weekend. In the meantime, here are some pics.
Sign up now
to remove ads between posts
Old Jul 01, 2010, 05:03 PM
keith S is offline
Find More Posts by keith S
r/c ships and workboats
Very nicely done!
Old Jul 01, 2010, 07:22 PM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Quote:
Originally Posted by keith S View Post
Very nicely done!
Thanks alot!
Old Jul 01, 2010, 08:21 PM
Kmot is offline
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
That's pretty awesome, Judge! 40" is huge, get some video!
Old Jul 01, 2010, 08:48 PM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Quote:
Originally Posted by Kmot View Post
That's pretty awesome, Judge! 40" is huge, get some video!
Hahaha, ok Tom, I'll do that in the few weeks... Lately, I have been flying my planes and gliders and haven't taken the boats out yet.
Old Jul 02, 2010, 05:26 AM
pkboo is offline
Find More Posts by pkboo
Is life for real?
pkboo's Avatar

Nice and big!


Thatīs purdy big, some pics of the HW would be greatly appreciated Your Honor Boo
Old Jul 02, 2010, 01:29 PM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
Cool!. A video of this thing screaming around would be excellent.
Old Jul 02, 2010, 02:36 PM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Quote:
Originally Posted by pkboo View Post
Thatīs purdy big, some pics of the HW would be greatly appreciated Your Honor Boo

I'll post pics of the drive unit over the weekend....... I wish I had the old videos I took when I used to run this in Central Park - but those are long gone... Actually, initially I was running this with a graupner 820BB on 20 cells linked to a scale outboard/inboard engine... It had some giddy-up but the drive unit, while being a beautiful scale model; was not smooth. It had bevel gears going from the motor to the prop instead of a flex drive system and as a consequence robbed my battery power considerably.

The new brushless system, I recently installed has not been run yet..
Old Jul 02, 2010, 11:08 PM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
Where about do you run her in Queens?
Old Jul 03, 2010, 12:05 AM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Quote:
Originally Posted by Jerome Morris View Post
Where about do you run her in Queens?
I usually run her in Springfield park, Hall's Pond or Baisley park lake
Old Jul 03, 2010, 04:01 PM
Rustbucket is offline
Find More Posts by Rustbucket
Registered User
I had often wondered how long it was going to be untill someone did that one. Grate job. !!! VERY nicely done. I would love to see the plans that came with that one. thank you sharing. DON That portland rustbucket
Old Jul 03, 2010, 05:04 PM
420TEE is offline
Find More Posts by 420TEE
Registered User
Quote:
Originally Posted by Kholder116 View Post
I usually run her in Springfield park, Hall's Pond or Baisley park lake
Good grief, he lives in the city and has a choice of places to run. I live in farm country and can't find a decent place to use a boat. T'aint fair.
Old Jul 03, 2010, 09:10 PM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Quote:
Originally Posted by Rustbucket View Post
I had often wondered how long it was going to be untill someone did that one. Grate job. !!! VERY nicely done. I would love to see the plans that came with that one. thank you sharing. DON That portland rustbucket
Hey there Rustbucket, unfortunately there were no plans that were followed here,,, the entire boat, other than the hull was made after looking at picures I took of the real one.... As I said, I will post a build log here over the weekend... it was actually easy, but time consuming....
Old Jul 05, 2010, 05:29 AM
pkboo is offline
Find More Posts by pkboo
Is life for real?
pkboo's Avatar

No hassle!


Quote:
Originally Posted by 420TEE View Post
Good grief, he lives in the city and has a choice of places to run. I live in farm country and can't find a decent place to use a boat. T'aint fair.
And has no hassle with park officials and itīs not a tiny boat ......they know better than to get on the case of ...well a Judge Boo
Old Jul 05, 2010, 10:14 AM
Kholder116 is offline
Find More Posts by Kholder116
Registered User
Quote:
Originally Posted by pkboo View Post
And has no hassle with park officials and itīs not a tiny boat ......they know better than to get on the case of ...well a Judge Boo

ok, wise guys.....lol!! seems I need to remove my occupation info from this site. hahaha... Actually, there are about four lakes around here and I went out yesterday to try and shoot some video of the zodiac but unfortunately three of them were really dirty and need a good cleaning... lI was too tired to to the fourth lake that the guys from my boat club, the Empire State Model Mariners, said was clean.

Eventually, I went the following morning - this morning and will post the video as soon as it uploads...
Last edited by Kholder116; Jul 05, 2010 at 10:47 AM. Reason: added photo


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion RC Zodiac DeGrey Scale Boats 2 Mar 24, 2011 08:54 AM
Discussion NYPD Zodiac Inflatable Aydemir Scale Boats 19 Jul 03, 2010 09:49 AM
Question Rigid inflatable 1:50 scale stduck54 Dock Talk 16 Feb 03, 2009 11:55 AM
Idea Inflatable RC? briankshow Micro Ready-to-Fly 15 Jun 07, 2007 11:45 AM