Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by orange&white, who may elect to delete unwanted replies.
Nov 18, 2012, 09:23 AM
Registered User
scaleviews.com's Avatar

Voodoo Plan Correction


I just realized I made a mistake and uploaded the wrong PDF file for the full size Voodoo plan I posted yesterday evening, which is about 5% oversized.

The incorrect file is now replaced with the correct PDF for the full size plan. If you downloaded the Voodoo plan before November 18, 2012 9:06 AM CST USA, you need to replace it with the correct file:

https://www.rcgroups.com/forums/show...65873&page=720

The incorrect PDF was 40.90 x 23.22 inches. The correct PDF is 39.03 x 22.15 inches.

My sincere apologies for the confusion.

Bob Keller
Last edited by scaleviews.com; Nov 18, 2012 at 09:33 AM.
Sign up now
to remove ads between posts
Nov 18, 2012, 10:24 AM
Closed Account
The Voodoo, which I flew with a Fox .35 in the 60's, was my favorite "wing". Fun to build and fly and looked good in yellow with red trim. What a great time we had back then flying those designs! Thanks for the PDF, Bob.

Soft landings,

Joe
Nov 18, 2012, 12:45 PM
Registered User
Quote:
Originally Posted by scaleviews.com
I just realized I made a mistake and uploaded the wrong PDF file..........The incorrect PDF was 40.90 x 23.22 inches. The correct PDF is 39.03 x 22.15 inches.
My sincere apologies for the confusion.
Bob Keller
Bob - this one brings back memories - thanks for the post! (And the awareness to catch the dimension shift!)
Nov 18, 2012, 01:38 PM
Registered User
Quote:
Originally Posted by giuseppi
Is this it? Not the best image but a good start if this is the one we're looking for.

Found it here:

http://3.bp.blogspot.com/_SFRYeYoVqH...g-Rod--FAI.jpg

g



My friend thinks that this is not the model for which he was looking ... seems to believe that the motor was mounted lower down the pylon.

Whatever ... he likes the one that you dug up and intends to build it.
Nov 19, 2012, 05:44 AM
WMD
WMD
Registered User
WMD's Avatar
Can anyone help? I'm looking for the plan and article : Flying Aces, April 1937 Henry Struck's "Build and Fly the Original Wright Biplane".

It used to be at www.ualberta.ca/~khorne ie Kenny's old timer site but the archive there is not working for me now, access is forbidden (?) maybe I missed something, looks like that site is being taken down, or something...

Anyone have a copy of that? Thanks in advance.
Nov 19, 2012, 06:33 AM
Registered User
perttime's Avatar
Quote:
Originally Posted by WMD
Can anyone help? I'm looking for the plan and article : Flying Aces, April 1937 Henry Struck's "Build and Fly the Original Wright Biplane".
It seems to be posted here:

https://www.rcgroups.com/forums/atta...mentid=4147873
Nov 19, 2012, 06:37 AM
WMD
WMD
Registered User
WMD's Avatar
Doh. I missed that. Thanks perttime.
Nov 20, 2012, 01:24 AM
Registered User
ama353's Avatar

Sig Shoestring (Profile Goodyear)


Does anyone have a scan of the plan that they'll share?

Thanks!


Dennis
Nov 21, 2012, 06:21 AM
WMD
WMD
Registered User
WMD's Avatar

Airspeed Envoy by HTowner


Does anyone have this one? Im quoting here: "Airspeed Envoy. Built by Mr HJ Towner, this 1 in. to 1 ft. flying scale model is one of the finest examples of the aero-modellers skill. Span of the plane is 51 in. and length 34 in. The model will rise off the ground and fly quite a long way."

I ask because I'm going through the book "Scale Model Aircraft That Fly" (again) and there's a very tempting photo of the uncovered model in chapter 1. Have attached a jpg here. I love these complicated twin motor rubber designs.

Would love to see the full plan...
Nov 21, 2012, 07:49 AM
AMA 8711, FCC K4WZA
DPlumpe's Avatar

Towner's Envoy


Here it is, WMD, though could use a better scan of the article.

-Dave
Nov 21, 2012, 08:00 AM
WMD
WMD
Registered User
WMD's Avatar
Beautiful! Thanks Dave.
Nov 21, 2012, 08:44 AM
Registered User
Hi,
Does anyone out there in "planland" have a full-size plan of "LE METEOR" that they can post so that it can be downloaded and printed???????
This was a free-flight plan published by Micron Meteore Moteurs in their catalogue. It was designed for their "Meteore 0.9cc" side-port diesel.
It is a pylon type with straight dihedral wings,twin rudders,fair size sub-rudder. Maybe a semi-profile fus.
Thank you.
Nov 21, 2012, 02:17 PM
Registered User
argat1's Avatar

Le petit journal


Here it is, as promissed, the link to Le petit Journal's article about FF modeling here in Mexico.

Ar.

http://www.lepetitjournal.com/mexico...un-maitre.html
Nov 21, 2012, 06:52 PM
Registered User
Towners Airspeed Envoy

WMD have a look in Derrick Scott`s site www.model-plans.co.uk he has this one.

Regards Alan
Nov 21, 2012, 11:05 PM
Hatters gonna hat.
madbomber's Avatar
Does anyone have a copy of the plans for The Ace of Spades by George Woolls? I think it appeared in Aero Modeller in August of 1958.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery Vintage & Old-Timer Plans built gallery orange&white Vintage & Old-Timer Designs 495 May 28, 2017 04:54 PM
Discussion Best source for Vintage/Old Timer plans? river-studio Vintage & Old-Timer Designs 22 Sep 18, 2016 02:22 PM
For Sale Old timer Sal Taibi plans Biper/Piper Aircraft - Fuel - Airplanes (FS/W) 2 Aug 15, 2011 09:30 AM