E-flite Blade SR 120 Thread. - Page 1087 - RC Groups
Thread Tools
Dec 13, 2012, 07:21 PM
Registered User
I started with planes and have only recently moved to helis. I went the Champ to the T-28 to the Beast route, which lots of others have done. I struggled mightily with the Beast until I bought a Twisted Hobbies EPP Edge 540, and after I'd beaten that up (it took a long, long time), the Crack Yak.

Honestly, if I had to do it over again I would have just started with with one of those Twisted Hobbies EPP planes. Yes they are extreme 3D planes, but when you dial down the control throws they are actually very docile and easy to fly. Beginners that I've taught (including my wife) actually preferred the Twisted Hobbies planes on low rates to the champ because it is easier to see and is so much more responsive to control inputs.

The Twisted Hobbies planes are also waaaay more durable than even the champ. It is unbelievable how much of a beating they can take.

Best part is as you get better and more comfortable, you start cranking up the control throws and before you know it you're learning hovering and rolling harriers. You just have to have the self discipline to take the control throws down to about 20% when you're starting out or you'll be in way over your head. Here's the thread for the crack yak: https://www.rcgroups.com/forums/show....php?t=1578833

Just 2 cents from a guy that's relatively new to this thread.
Sign up now
to remove ads between posts
Dec 13, 2012, 08:22 PM
Rock-n-Aileron Roll!
Saxguy1000's Avatar
Quote:
Originally Posted by BattleDude
Buddy, if I had your pension I wouldn't need a job!

And yeah, have to watch out for Bison, wolves, bears... and jackalopes!
But since I have learned to maintain lots of altitude, I haven't hit one!

Tell you what's fun though, buzzing the horses and cows as close as possible.
They take off running like a herd of turtles!!!

Wyoming Cattle Round-up:
http://www.youtube.com/watch?v=qWvRkUED2HA
ROTFL!!!! I am forwarding this to all my cattle farm relatives!!!!
Dec 13, 2012, 08:31 PM
Which way is up?
stuball56's Avatar
Quote:
Originally Posted by gavronm

Honestly, if I had to do it over again I would have just started with with one of those Twisted Hobbies EPP planes. Yes they are extreme 3D planes, but when you dial down the control throws they are actually very docile and easy to fly. Beginners that I've taught (including my wife) actually preferred the Twisted Hobbies planes on low rates to the champ because it is easier to see and is so much more responsive to control inputs.

The Twisted Hobbies planes are also waaaay more durable than even the champ. It is unbelievable how much of a beating they can take.

Best part is as you get better and more comfortable, you start cranking up the control throws and before you know it you're learning hovering and rolling harriers. You just have to have the self discipline to take the control throws down to about 20% when you're starting out or you'll be in way over your head. Here's the thread for the crack yak: https://www.rcgroups.com/forums/show....php?t=1578833

Just 2 cents from a guy that's relatively new to this thread.
I have had my only successful flying so far on a Twisted Hobbys Crack Pitts Biplane. What you say is so right on, you can dial them down so far as to be very beginner friendly, plus you can fly VERY slowly if you want. The only thing about them is that ( and I find it a plus) you HAVE to use rudder for turns, unlike most planes where you can turn with pure aileron input.
Dec 13, 2012, 09:20 PM
Look ma, no hands!
1Pilgrim's Avatar
Quote:
Originally Posted by sonicjet
http://www.horizonhobby.com/Products...#quickOverview
Its a 40% bigger msr for 30$ more and just 20$ short of an full size brushless CP SR,not to be cruel...but who will buy it?
This was the original post on this thread. Forecasting is really hard, especially when you're talking about the future.
Dec 13, 2012, 09:24 PM
Registered User
Brian VT's Avatar
Quote:
Originally Posted by sonicjet
Its a 40% bigger msr for 30$ more and just 20$ short of an full size brushless CP SR,not to be cruel...but who will buy it?
Quote:
Originally Posted by 1Pilgrim
This was the original post on this thread. Forecasting is really hard, especially when you're talking about the future.
What's funny to me is that I have all three ! LOL
Dec 13, 2012, 09:29 PM
Registered User
Brian VT's Avatar
Quote:
Originally Posted by stuball56
I have had my only successful flying so far on a Twisted Hobbys Crack Pitts Biplane. What you say is so right on, you can dial them down so far as to be very beginner friendly, plus you can fly VERY slowly if you want. The only thing about them is that ( and I find it a plus) you HAVE to use rudder for turns, unlike most planes where you can turn with pure aileron input.
I'm glad you mentioned the bipe. After reading his thread I went to their site.
I like bipes and wondered if it also fit the same "beginner" description. Good to hear. It might be my next plane. I have a few 4-channel planes but I think I should go back to something better to learn with. The T-28 just looks too small and fast for what I want from an aileron trainer. (due respect given to the experts that recommend it)
Dec 13, 2012, 09:32 PM
Rock-n-Aileron Roll!
Saxguy1000's Avatar
Having flown them, the biplane is completely different flying than the monoplane like the T-28. The Trojan is not fast with the 1S battery included, but it is the most stable and easiest to take off and land. Small is relative. It stays in the air better in order for you to see it!
Dec 13, 2012, 09:37 PM
Look ma, no hands!
1Pilgrim's Avatar
Quote:
Originally Posted by Saxguy1000
This sounds so perfect it's got to be done! All you Virginia Beach/Hampton Roads guys can contact me about establishing a flyzone. With property purchase, legal fees, lawn equipment--I think we could arrange to have an acre for about $2000 X 10. Of course, no facilities and we have to chop down trees, make a landing field--that'll be just another $6K. Yeah it's doable!!!
I guess I should have mentioned that I belong to an informal group exactly like the one I described - a 5-acre grass field maintained for our exclusive use with the surrounding 25 acres planted in nice soft low growing beans, no trees (okay one tree just to keep us honest ), no officers, no dues, no meetings, no fund raisers, no mandatory insurance (although we all have at least an AMA Park Flyer card in case we ever visit a less tie-dyed field ), all for $100/yr to help pay for the mowing. Oh, and winter flying at the local hs gym. And a charging station at the field. I don't know how many amps. A lot.

There's no sign and you can't see the field from the road; no one would even know it was there but for the aircraft overhead.

Life just isn't fair, is it?
Last edited by 1Pilgrim; Dec 13, 2012 at 09:58 PM.
Dec 13, 2012, 09:54 PM
Wind you go around in circles
Wind Spirit's Avatar
Quote:
Originally Posted by Saxguy1000
It's true...right along with the flying jackalopes.
I would be willing to trade some gator tail for some of those tasty jackalope.WS
Dec 13, 2012, 11:16 PM
Epilepsy Awareness
Chap1012's Avatar
Kyle, you still teasing them there doggies again with your 4X4 before rounding them up

Mike.
Dec 14, 2012, 05:31 AM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
A little off topic...the protective cover on my DX6i was taken off and now I have some minor scratches on the screen..what is good to use that will remove the scratches so I can put a new protective cover on it...thanks.
Dec 14, 2012, 06:55 AM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by Jake8131
A little off topic...the protective cover on my DX6i was taken off and now I have some minor scratches on the screen..what is good to use that will remove the scratches so I can put a new protective cover on it...thanks.
Jake, when you say protective cover are you talking about the film over the clear plastic that has the actual LCD below it... that you usually peel off after unboxing? Or are you referring to said clear plastic (film already removed and long gone) as the protector over the LCD?

In other words, which of those parts are you calling the "screen"?

... I've never had any luck buffing scratches out of plastic and tried all kinds of stuff including the kits for fixing up the lenses over car headlights... usually makes things worse (hazy).
Dec 14, 2012, 10:11 AM
Epilepsy Awareness
Chap1012's Avatar
Jake, If you google "Plastic Scratch Remover" you'll com up with a slew of hits. Some, are even marine grade. Toothpaste (not gel) works on watch crystals BTW. You could try that first.

Mike.
Dec 14, 2012, 12:41 PM
Against Helicopter Cruelty
Heli Pad's Avatar
Yeah, I was gonna suggest toothpaste, a very mild abrasive. But it all depends how deep the scratches are.
Dec 14, 2012, 01:59 PM
High Plains Drifter...
BattleDude's Avatar
Quote:
Originally Posted by Wind Spirit
Do you think I will get one? I try to be good.WS
Not sure if you will get one, but I hope you do! Maybe 2 or 3!

BD


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Blade SR RTF Electric Micro Heli by E-flite ghost2212 Micro Helis 6658 Oct 28, 2015 09:24 AM
Discussion Update Blade CP or buy E-Flite Blade SR or 400? markhwing Electric Heli Talk 10 Aug 06, 2012 04:16 PM
Link E-flite mSR batteries E flite 110-120 Hyp.CX 120 and others everydayflyer Batteries and Chargers 45 Apr 08, 2010 05:55 AM
For Sale Did you just buy a new E-Flite Blade SR? Z06 Tony Aircraft - Electric - Helis (FS/W) 3 Feb 28, 2010 01:01 AM
New Product Blade SR RTF Electric Micro Heli by E-flite ghost2212 Micro Ready-to-Fly 2 Jan 07, 2010 10:36 AM