E-flite Blade SR 120 Thread. - Page 1063 - RC Groups
Thread Tools
Dec 01, 2012, 02:48 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by 1Pilgrim
The MCX2 is a fun little coax but after tooling around with the 120 I find the little guy way too slo-o-o-w. Plus it has that nasty habit of getting stupid and falling down drunk whenever it makes a hard left turn. Anyway ..:
Quote:
Originally Posted by Brian VT
I'm the same way ! I'm fine going right, but can't go left. I've been advised, by she who is smarter than me, that I should stick to beer and avoid the Bushmill's.

mcx2 flybar stalls on left turns because it's driven by the rotor that shuts down with left rudder input... full left rudder actually powers it (upper rotor) off completely when at low throttle...

... no spinning flybar... no stabilization...

result = the funky chicken
Last edited by North_of_49; Feb 19, 2015 at 12:39 PM.
Sign up now
to remove ads between posts
Dec 01, 2012, 04:12 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by North_of_49
mcx2 flybar stalls on left turns because it's driven by the rotor that shuts down with left rudder input... full left rudder actually powers it (upper rotor) off completely...

... no spinning flybar... no stabilization...

result = the funky chicken
Commonly Called The Clack Of Death
Dec 01, 2012, 04:39 PM
Look ma, no hands!
1Pilgrim's Avatar
funky chicken + clack of death = cluck of death?
Dec 01, 2012, 05:23 PM
Look ma, no hands!
1Pilgrim's Avatar

Exculpatory language


Results may vary by individual. No warranty is expressed or implied. Investments may lose value; not guaranteed by any bank.
Objects in mirror are closer than they appear.


My heli is stock except for the following mods and upgrades:

Added CHAP1012's fishing line mod (thanks Mike!)
Adjusted clearance between main gear and motor pinion
Trimmed approx. 1/2" off each blade
Balanced and tracked blades and flybar (critical)
Installed Dylwad's Astroid Designs CNC battery mount for larger batts
Installed Xtreme ball bearing motor
Installed CNC rotor hub and anti-rotation collar

I set up a separate model on my dx6i for flying in either confined spaces or the great outdoors (including the gym). The "outdoor" settings aren't working very well on my new heli at present; will do some more experimenting at the gym Wednesday night.

Here are the settings that seem to work best for me fly in confined spaces:

ADJUST LIST > D/R&EXPO
AILE 0 100% + 30%
ELEV 0 100% + 30%
RUDD 0 100% + 15%

ALL SUB TRIMS = 0

ADJUST LIST > THRO CUR
NORM POS 1 0%
NORM POS 2 35%
NORM POS 3 50%
NORM POS 4 65%
NORM POS 5 100%

ADJUST LIST > MIX 1
ELEV => AILE ACT
RATE L -15% R -15%
SW ON TRIM INH
ADJUST LIST > MIX 2
RUDD => AILE ACT
RATE L -20% R -20%
SW ON TRIM INH
Last edited by 1Pilgrim; Dec 01, 2012 at 08:45 PM.
Dec 01, 2012, 07:47 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
What is the difference between TRIM INH and TRIM ACT?
Dec 01, 2012, 08:15 PM
Look ma, no hands!
1Pilgrim's Avatar
Quote:
Originally Posted by Jake8131
What is the difference between TRIM INH and TRIM ACT?
I dunno - ask Mr. Salt. He says set it to INH but it doesn't seem to make any difference either way.

Anyway here's a quick vid I took flying in the basement with the indoor settings.

2012 12 01 SR 120 Indoor Settings (1 min 43 sec)


Oops - my hat cam is still set for DST!
Last edited by 1Pilgrim; Dec 01, 2012 at 08:20 PM.
Dec 01, 2012, 08:24 PM
Epilepsy Awareness
Chap1012's Avatar
Quote:
Originally Posted by Jake8131
What is the difference between TRIM INH and TRIM ACT?
Go to page 125 of the DX6i manual:
http://www.spektrumrc.com/ProdInfo/F...anual_DX6i.pdf

INH= inhibit
ACT= activate

Mike.
Dec 01, 2012, 08:39 PM
Look ma, no hands!
1Pilgrim's Avatar
Quote:
Originally Posted by Chap1012
Go to page 125 of the DX6i manual:
http://www.spektrumrc.com/ProdInfo/F...anual_DX6i.pdf

INH= inhibit
ACT= activate

Mike.
Yes, but how does TRIM INH differ from TRIM ACT?

EDIT:
OIC - it pays to read the fine print! Thanks Mike I get it now. It looks like TRIM really should be set to INH or trimming the elevator or rudder will also trim the ailerons! I'm gonna go back and edit my settings post #15934...
Last edited by 1Pilgrim; Dec 01, 2012 at 08:46 PM.
Dec 01, 2012, 09:04 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by 1Pilgrim
I dunno - ask Mr. Salt. He says set it to INH but it doesn't seem to make any difference either way.

Anyway here's a quick vid I took flying in the basement with the indoor settings.

http://www.youtube.com/watch?v=aBPN0tPEadc

Oops - my hat cam is still set for DST!
Beautiful wonderment...awesome flying!!
Dec 01, 2012, 09:05 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by Chap1012
Go to page 125 of the DX6i manual:
http://www.spektrumrc.com/ProdInfo/F...anual_DX6i.pdf

INH= inhibit
ACT= activate

Mike.
I know that, but what happens when you select ACT instead of INH for TRIM?

Never mind...got me again, Mike!
Dec 01, 2012, 09:20 PM
Look ma, no hands!
1Pilgrim's Avatar
Quote:
Originally Posted by Jake8131
Beautiful wonderment...awesome flying!!
Hey, I showed you mine - now you show me yours!
Dec 01, 2012, 09:45 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by 1Pilgrim
Hey, I showed you mine - now you show me yours!
My living room is only 14f feet wide...no room to fly my 120sr.
Dec 01, 2012, 11:26 PM
Wind you go around in circles
Wind Spirit's Avatar
Quote:
Originally Posted by 1Pilgrim
I dunno - ask Mr. Salt. He says set it to INH but it doesn't seem to make any difference either way.

Anyway here's a quick vid I took flying in the basement with the indoor settings.

http://www.youtube.com/watch?v=aBPN0tPEadc

Oops - my hat cam is still set for DST!
Hey Pilgrim, Very nice flight. I just want to say I have all of Mr. Salt's books and happy with all of them. One thing that he tries to stress is that his info is just a guide to get you started and that you should try different settings to find what works best for you and your bird and he is 100% right. You have done that. I just want others to know that it is easy to get stuck on one or two settings that work. Guy's, do what Pilgrim and I have done, play with all the settings to get the most out of your TX and bird. WS
Dec 02, 2012, 03:05 AM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by Chap1012
Go to page 125 of the DX6i manual:
http://www.spektrumrc.com/ProdInfo/F...anual_DX6i.pdf

INH= inhibit
ACT= activate

Mike.
Just fancy pantsy words for turned off/ turned on
Dec 02, 2012, 10:27 AM
450 Helis Rule!
450man's Avatar
Here is a vote for Mr Salt's e-book.

I have made many of the mods he suggests...

- added heatshrink to tail motor housing.
- balanced blades. I didn't think would make much difference but it smoothed out mine a lot.
- epoxied motor to support as it was flexing quite a bit.
- added varios mixes to help with its little characteristics. I found some of them worthwile while others I did not like and have now removed.
- lubbed the feathering O-rings

An excellent intro to the 120SR or MSR/X and to fixed pitch helis in general.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Blade SR RTF Electric Micro Heli by E-flite ghost2212 Micro Helis 6658 Oct 28, 2015 08:24 AM
Discussion Update Blade CP or buy E-Flite Blade SR or 400? markhwing Electric Heli Talk 10 Aug 06, 2012 03:16 PM
Link E-flite mSR batteries E flite 110-120 Hyp.CX 120 and others everydayflyer Batteries and Chargers 45 Apr 08, 2010 04:55 AM
For Sale Did you just buy a new E-Flite Blade SR? Z06 Tony Aircraft - Electric - Helis (FS/W) 3 Feb 28, 2010 12:01 AM
New Product Blade SR RTF Electric Micro Heli by E-flite ghost2212 Micro Ready-to-Fly 2 Jan 07, 2010 09:36 AM