E-flite Blade SR 120 Thread. - Page 1028 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 10, 2012, 05:03 PM
Rock-n-Aileron Roll!
Saxguy1000's Avatar
@Jake: I guess RCGroups will have to be good enough for you!!!
Sign up now
to remove ads between posts
Oct 10, 2012, 05:16 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by Saxguy1000
@Jake: I guess RCGroups will have to be good enough for you!!!
Yep!!!
Oct 10, 2012, 08:30 PM
Against Helicopter Cruelty
Heli Pad's Avatar
Quote:
Originally Posted by Jake8131
I STILL can't get on Helifreak. com!!!
Looks like you've been banned! Just hang with us.
Oct 10, 2012, 10:57 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by Heli Pad
Looks like you've been banned! Just hang with us.
I can't take it anymore....help!


Oct 11, 2012, 08:13 AM
Rock-n-Aileron Roll!
Saxguy1000's Avatar
When I have this problem--can't get to certain wep pages--at work, I just call the IT dude. Have you tried that?
Oct 11, 2012, 11:02 AM
Registered Abuser
Quote:
Originally Posted by Jake8131
I can't take it anymore....help!


I got locked out for a little while too but I'm back on now.

Apparently someone uploaded a .zip that had a corrupted file in it which caused the site to red-flagged by many anti-virus programs. The file wasn't spread and has been dealt with now. I got that info from their site the other day but I can't seem to find it now.

You should be able to find a way to override something in some security settings somewhere...
Oct 11, 2012, 03:01 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by Chris.S.
I got locked out for a little while too but I'm back on now.

Apparently someone uploaded a .zip that had a corrupted file in it which caused the site to red-flagged by many anti-virus programs. The file wasn't spread and has been dealt with now. I got that info from their site the other day but I can't seem to find it now.

You should be able to find a way to override something in some security settings somewhere...
Still no go....hmmmmmm.
Oct 11, 2012, 04:33 PM
Registered User
Got all my parts to fix up my 120SR and the tx BD sent me is in the country. I just have to collect it from a depot or wait till Monday for them to deliver it

Hope to have it all fixed up by tomorrow night but there is quite a lot of soldering that needs doing and I don't want to mess it up by rushing. Fingers crossed it does the trick.
Oct 11, 2012, 04:56 PM
Rock-n-Aileron Roll!
Saxguy1000's Avatar
"Quite a bit of soldering"? Wow, are you building a Frankenheli?
Oct 11, 2012, 06:01 PM
Registered User
Quote:
Originally Posted by Saxguy1000
"Quite a bit of soldering"? Wow, are you building a Frankenheli?
haha

There have been few issues along the line, resulting in none of the components that have connectors actually have connectors now and all the wiring that is meant to be soldered to the front of the board is now at the back of the board lol.

It all seemed to work though, but now i have to put a new servo on and the wires are tiny compared to my huge soldering iron, take of the connector of my new rear boom and wire into the board. change the swash plate and add the links and we are a go go.

Ive been told to not go near it once its fixed till i have the new tx BD sent me but i wont have it until Monday so its going to take a lot of restraint.
Oct 11, 2012, 08:07 PM
Epilepsy Awareness
Chap1012's Avatar
Quote:
Originally Posted by SR120 fan
haha

There have been few issues along the line, resulting in none of the components that have connectors actually have connectors now and all the wiring that is meant to be soldered to the front of the board is now at the back of the board lol.

It all seemed to work though, but now i have to put a new servo on and the wires are tiny compared to my huge soldering iron, take of the connector of my new rear boom and wire into the board. change the swash plate and add the links and we are a go go.

Ive been told to not go near it once its fixed till i have the new tx BD sent me but i wont have it until Monday so its going to take a lot of restraint.
While you are waiting for the TX BD sent you there are a couple mods you could do before you take flight. Click on my user name and scroll down to "120SR must do mods." Just click on the link. All I did was compile a few things other members have contributed to. I did this to preserve easy access for people just getting into the 120SR. So, please, do not thank me..

BTW, if there is any chance to splice wires "then" solder...do it!

Mike.
Oct 11, 2012, 10:39 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by SR120 fan
...

... but now i have to put a new servo on and the wires are tiny compared to my huge soldering iron,

...
https://www.rcgroups.com/forums/show....php?t=1619368
Oct 12, 2012, 01:18 AM
Registered User
Quote:
Originally Posted by North_of_49
That's a great link and will be half useful but unfortunately one of my servo wires has already come off the board through no fault(must have done something, but not deliberate) of my own

Other wise that would have been great.

Thanks
Oct 12, 2012, 01:27 AM
Registered User
Quote:
Originally Posted by Chap1012
While you are waiting for the TX BD sent you there are a couple mods you could do before you take flight. Click on my user name and scroll down to "120SR must do mods." Just click on the link. All I did was compile a few things other members have contributed to. I did this to preserve easy access for people just getting into the 120SR. So, please, do not thank me..

BTW, if there is any chance to splice wires "then" solder...do it!

Mike.
As I have two days I will check out all of the mods. I was tempted to go get the tx from the depot but it is a little far out of my way. It is in my university city but I normally get the train there as I get a discounted ticket because of my wife's work plus it gives me time to do (how sad at 29) homework which I have to do before I get there or they don't let you in the lab and that is as bad as it gets at my school.

I'm already staring at my soldering iron with adoring eyes. It has been half way around the world with me and fixed many a laptop and I'm sure it will do an admirable job.

Big thanks to Battle Dude for the radio. I'm so excited and if I make a mess of the repair at least I will eventually have another one 120SR as I'm getting one of him.

Will have to fit sometime in with the wife or it won't go down well. I'll work it out

Off to uni at the ridiculous time of 625am!! Speak to you soon chaps when I have my iron plugged in. Probably in about 9 hours.
Oct 12, 2012, 08:49 AM
Epilepsy Awareness
Chap1012's Avatar
Quote:
Originally Posted by SR120 fan
<SNIP>

Will have to fit sometime in with the wife or it won't go down well. I'll work it out
No worries Mate. She'll turn out to be the "perfect RC wife"

The Perfect RC Wife (5 min 5 sec)


Mike.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Blade SR RTF Electric Micro Heli by E-flite ghost2212 Micro Helis 6658 Oct 28, 2015 09:24 AM
Discussion Update Blade CP or buy E-Flite Blade SR or 400? markhwing Electric Heli Talk 10 Aug 06, 2012 04:16 PM
Link E-flite mSR batteries E flite 110-120 Hyp.CX 120 and others everydayflyer Batteries and Chargers 45 Apr 08, 2010 05:55 AM
For Sale Did you just buy a new E-Flite Blade SR? Z06 Tony Aircraft - Electric - Helis (FS/W) 3 Feb 28, 2010 01:01 AM
New Product Blade SR RTF Electric Micro Heli by E-flite ghost2212 Micro Ready-to-Fly 2 Jan 07, 2010 10:36 AM