Thread Tools
Old Jun 23, 2010, 12:40 AM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
Cool

Semi Scale Schweizer 300 3 blade


Here is my Hk 450 Pro belt edition with a Lightning heli 3 blade head. I am using the scale blades that RC Aerodyne offers.
Overall performance is good, and with the correct phasing, I do not need any electronic stabilization.
I run a lower head speed, and the tail keeps up nicely. My thought is to let the blades cone properly instead of being flung out with a crazy high head speed.

Current Setup:
Hk450 Pro Belt Drive
Hobbymate HB2840 3600Kv 13t
Mystery 40A ESC
MD922 Digital Servos .07 sec. Cyclic
Futaba 9257 Tail Servo
HK401b Gyro
RC Aerodyne Scale 450 Blades

Phasing:
with one blade over the tail boom, the follower is 90 degrees to it.

Flight:
Remembering that we are flying helicopters, I thought of a real one in which you have to trim the rotor disk to the proper angle for the type of flight you are in.
In forward flight you have to trim the stick back to neutral or else you will be way in the stick and that's when the dual rates start to loose effect.
Once you get it trimmed close for the winds you are in, the helicopter will fly nice for the whole flight.




Lightning Heli 3 blade head Trex 450 Pro NO ELECTRONIC STABILIZATION!!!! (3 min 27 sec)
Last edited by planedude91; Jul 06, 2010 at 06:10 PM.
Sign up now
to remove ads between posts
Old Jun 23, 2010, 01:36 AM
sidneyw is offline
Find More Posts by sidneyw
Registered User
Good show; those blades are nice!

I got the same blades going a few months back.

AS350 Smartmodel scale blades (1 min 52 sec)
Site Sponsor
Old Jun 23, 2010, 01:09 PM
Hoverup is offline
Find More Posts by Hoverup
2013 GRAND SPORT CORVETTE
Hoverup's Avatar
Good show both of you.
RCG Plus Member
Old Jun 23, 2010, 04:08 PM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
If only someone made a EC120 fuse or a simple Schweizer 300 canopy... that would be perfect! (And a working fenestron)
Old Jun 30, 2010, 01:24 PM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
Due to my hobbycity Corona DIY 2.4 module intermittently cutting out, upon landing the helicopter arced quite nicely into the ground. back to the flybared head to prepare for the 600!
Old Jun 30, 2010, 04:18 PM
kcornels is offline
Find More Posts by kcornels
Registered User
You can get a Hughes 300 Fuse from Pro Heli... .

http://www.proheli.de/onlineshop/ind...?cPath=196_215

but it's a bit semiscale... .
Old Jul 01, 2010, 05:16 PM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
do they ship to US? That looks good enough for me.. i can visualize the rest.
Old Jul 01, 2010, 07:04 PM
Hoverup is offline
Find More Posts by Hoverup
2013 GRAND SPORT CORVETTE
Hoverup's Avatar
Quote:
Originally Posted by planedude91 View Post
do they ship to US? That looks good enough for me.. i can visualize the rest.
I have two of these both NIB. PM me if you are interested.

Cheers - Boyd
RCG Plus Member
Old Jul 02, 2010, 03:46 AM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
I plan on making a scale head soon for a S300 so a fuse would be perfect!
Old Jul 02, 2010, 06:08 AM
shim is offline
Find More Posts by shim
Registered User
Dude,
Could you provide a link to where you purchased them.

Thanks.
Old Jul 02, 2010, 07:54 AM
Hoverup is offline
Find More Posts by Hoverup
2013 GRAND SPORT CORVETTE
Hoverup's Avatar
Quote:
Originally Posted by shim View Post
Dude,
Could you provide a link to where you purchased them.

Thanks.
http://www.proheli.de/onlineshop/ind...?cPath=196_215

Cheers - Boyd
RCG Plus Member
Old Jul 02, 2010, 12:56 PM
shim is offline
Find More Posts by shim
Registered User
Hi Hoverup,
Do you have a link to the 3 bladed head.

How does it compare to those sold by smartmodel.

Thanks.
Old Jul 02, 2010, 12:58 PM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
This is where mine came from.
http://scaleflying.3dcartstores.com/...ize_p_808.html

easy enough to set up, but requires a lot of tightening after each flight. Just routine maintenance. I also have a smartmodel 3 blade head, but with the weird swash i never got around to using it.
Old Jul 02, 2010, 01:34 PM
Hoverup is offline
Find More Posts by Hoverup
2013 GRAND SPORT CORVETTE
Hoverup's Avatar
Quote:
Originally Posted by shim View Post
Hi Hoverup,
Do you have a link to the 3 bladed head.

How does it compare to those sold by smartmodel.

Thanks.
This is the one I fly. It's a USA designed, CNC macined and tested in Washington state right across the freeway from Boeing's main plant at Cliff's RCAerodyne headquarters and flying field test site.

The head referenced by planedude91 is a Lightning products head and has had a history of some problems. Mainly soft grade aluminum and poor quality fasteners. These heads are usable, but should be completely disassembled, cleaned and reassembled using thread locker and ball bearing lube.

Quote:
Originally Posted by planedude91
easy enough to set up, but requires a lot of tightening after each flight.
This should not be required, but regular maintenance inspecting is a good habit to have. BTW I had the Lightning heli head so I have a baseline for comparison.

Cheers - Boyd
RCG Plus Member
Old Jul 02, 2010, 01:39 PM
planedude91 is offline
Find More Posts by planedude91
Gerktron Remix
planedude91's Avatar
I would gladly swap out the LH head with a higher quality RCAerodyne head, but I didn't want to wreck a nice quality head during testing.

@Hoverup, does it make a difference if the static swash plate balls are not in line with the dynamic swash balls?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted 3-blade 450 swash or full head TRYPHON75 Aircraft - Electric - Helis (FS/W) 0 May 13, 2010 06:53 AM
Sold Typhoon 3 blade head with swashplate (450 size) pttse Aircraft - Electric - Helis (FS/W) 9 Mar 11, 2010 12:24 PM
Discussion 450 3 blade head...Smartmodel vs. RC Aerodyne...which is shorter? SidewaysLS4 Scale Helicopters 12 Sep 23, 2009 06:14 PM
For Sale 2 blade cp pro frames with/electronics, cnc head...*NEW PRICE* abapitcher712 Aircraft - Electric - Helis (FS/W) 0 Jul 19, 2008 05:00 PM
Sold HBFP bare frame w/motors no head or electronics jettvolks Aircraft - Electric - Helis (FS/W) 4 Nov 21, 2007 08:15 PM