Thread Tools
Old Mar 18, 2012, 11:40 PM
forsakenrider is offline
Find More Posts by forsakenrider
All this talk of the new build and now pictures? whats going on guys!!!
Sign up now
to remove ads between posts
Old Mar 19, 2012, 12:14 AM
pdawg is online now
Find More Posts by pdawg
Need 4 Speed!
pdawg's Avatar
AS,
Glad you approve of the first wing outta the mold....they will only get better! The root and tip were cut with a fine tooth zona saw. The top skin hinge line scribed with the zona saw and a straight edge to define the hinge location. The botton skin was cut with a fresh razor blade. And yes...2oz Kevlar as the hinge material. Hope that helps with your project.

Forsakerider,
The great news is that I'm close to being a Dr. The bad news is I'm swamped with no chance of building in NYC. So Corsair nut is helping push the project forward by assembling the first composite wing Electrolyte. The molded wings should make this airframe go together much faster. Any news with your Micro stinger?
Old Mar 19, 2012, 01:52 AM
AIR SALLY is online now
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
i dont know how you can get it much more perfect than the wing i saw ...im not suprized ....like i said before if i need cutting on i want your skills doing it.im in for a challange on my F-20 cause i want the le of the flap and alieron to have the bull nose molded on it .it will take a different typ of wing mold to do it .if it wont work i will do it like what i've seen you do and also what i see on the BVM arf's .
Old Mar 19, 2012, 02:02 AM
AIR SALLY is online now
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
i have a BVM fury and i'll study how they do it ...the alieron lower skin slides under real nice.it may be they are molding the wing with the alieron deflected up a tad??? not sure .thats how i have to do the F-20 wing the flap has to beedown and the alieron up...
Old Mar 19, 2012, 04:59 AM
Tumbler is online now
Find More Posts by Tumbler
Registered User
Tumbler's Avatar
Rodger,

Did you see how I cut out my rudder on the last page. I cut the slot ahead of the hinge line and it allows the surface to slide under. I made the cuts on the stab and wing, but wasn't until I did the rudder/fin that I got it right. Takes some experimenting but for mine it needed to be at least 1/8" ahead.

Brian

Quote:
Originally Posted by AIR SALLY View Post
i have a BVM fury and i'll study how they do it ...the alieron lower skin slides under real nice.it may be they are molding the wing with the alieron deflected up a tad??? not sure .thats how i have to do the F-20 wing the flap has to beedown and the alieron up...
Old Mar 19, 2012, 05:01 AM
Tumbler is online now
Find More Posts by Tumbler
Registered User
Tumbler's Avatar
LOL takes me 6 hours to make a fuse.

Quote:
Originally Posted by pdawg View Post
Yeah scraps for you are perfectly usable for me! The materials are cheaper but the time investment is still there. it's about an hour to layup each fuselage half and then another 30min- hour to join. Still a lot faster than building another fuse from balsa!!! Oh yeah....now there are wings to layup too .
Old Mar 19, 2012, 09:27 AM
pdawg is online now
Find More Posts by pdawg
Need 4 Speed!
pdawg's Avatar
AS,
BVM has layed up a lot of wings so they know exactly where to cut their ailerons to have the smallest gap possible. You can do it to if you lay up a few wings and spend the time to make templates. Practice makes perfect!
Old Mar 19, 2012, 12:50 PM
AIR SALLY is online now
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
on the fury the lower alieron surface is @1/4" behind the hinge line .it slides under with very little gap,and when the alieron is neutral the cut gap is only @ .040 - .050 it's really cool how this is done.there core material also looks to have been machined down ? i need to see that how they do it vid that the history chn did at BVM.im sure they have all the cnc stuff to do this.
Old Mar 19, 2012, 12:55 PM
Tumbler is online now
Find More Posts by Tumbler
Registered User
Tumbler's Avatar
That part is done by hand actually. They show the guy making the cuts on the episode of How It's Made. Go to 3:40 to watch them do part of it. My gap is almost non existant. Yes, you have to remove the core material. When I lay up the part, before I join the halves, I use a sharpened screw driver as a chiself to cut away the material over the hinge area so that only the glass remains.

How It's Made - RC Jets (10 min 7 sec)


Quote:
Originally Posted by AIR SALLY View Post
on the fury the lower alieron surface is @1/4" behind the hinge line .it slides under with very little gap,and when the alieron is neutral the cut gap is only @ .040 - .050 it's really cool how this is done.there core material also looks to have been machined down ? i need to see that how they do it vid that the history chn did at BVM.im sure they have all the cnc stuff to do this.
Old Mar 19, 2012, 01:27 PM
hanzie is offline
Find More Posts by hanzie
Fear me, I'm a space-duck.
hanzie's Avatar
Ha! Dutch subtitles! LOL!
Old Mar 19, 2012, 06:52 PM
invertmast is offline
Find More Posts by invertmast
Registered User
Quote:
Originally Posted by Tumbler View Post
LOL takes me 6 hours to make a fuse.
Man, you guys are killing me! 1 hour for a electrolyte fuse, 6 hours for a blaze fuse.. At that rate, its gonna be 30 hours for an F-14 fuse. lol Hell, it took an hour to do one horizontal stab
Old Mar 19, 2012, 06:57 PM
pdawg is online now
Find More Posts by pdawg
Need 4 Speed!
pdawg's Avatar
Invertmast
3 hours for the electrolyte layup. That doesn't include mold prep or time to cut glass. It's actually time consuming IMO considering the small fuselage size.
Old Mar 19, 2012, 08:44 PM
invertmast is offline
Find More Posts by invertmast
Registered User
Oh ok... i was thinking an hour was awefully short.. Still I envy you guys.. it takes me atleast 3 hours to get motivated lol
Old Mar 20, 2012, 10:03 PM
Mikey 68 is online now
Find More Posts by Mikey 68
Registered User
Quote:
Originally Posted by invertmast View Post
Oh ok... i was thinking an hour was awefully short.. Still I envy you guys.. it takes me atleast 3 hours to get motivated lol
Been watching your videos on the F-14 cant wait to see that done.
Old Mar 22, 2012, 02:51 AM
AIR SALLY is online now
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
i wonder what they use to release the mold from the painting in the mold .cant be wax as the paint would fish eye.cant be pva cause they were doing masking and stencils right in the mold


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Bvm Electra Jet @ Heart Of Ohio Jet Scramble kevin Electric Ducted Fan Jet Talk 42 Jan 04, 2008 07:30 PM
We have Electra Jet and Pico Jet new In box mmm208 Aircraft - Electric - Airplanes (FS/W) 0 Aug 23, 2002 11:13 AM
WTB or WTT for a Twin Jet, Pico Jet, Electra Jet darenm Aircraft - Electric - Airplanes (FS/W) 3 Aug 23, 2002 10:46 AM
Electra Jet or Typsy - Anyone got a Electra JET VIDEO CLIP? rojoyinc Parkflyers 3 Apr 21, 2002 12:56 PM