Thread Tools
Old Jun 14, 2010, 11:42 PM
RaptorAP is offline
Find More Posts by RaptorAP
Registered User
Discussion

HK CCD $17 board cameras


I saw the price and ordered 4, if the tests go well, Ill def order more!
They are said to be Sony 1/3" CCD cameras. Battery JST plug installed, Ill cut the other connector off and wire it to the video transmitter, for 17 bucks... you cant go wrong!
http://www.hobbycity.com/hobbycity/s...dProduct=11977
Sign up now
to remove ads between posts
Old Jun 14, 2010, 11:48 PM
Bonafidepirate is offline
Find More Posts by Bonafidepirate
define("BEASTMODE", "1");
Bonafidepirate's Avatar
Cool, I was wondering when someone would try one out...

What Sony chip is on the board? Is it a CXD3142R by any chance?


Edit, nevermind, I looked at the specs closer, they list that chip on HK's page... I was asking because it's the same chip used on the $25 ($18 before shipping) cameras from eBay that work so well!
Old Jun 14, 2010, 11:54 PM
RaptorAP is offline
Find More Posts by RaptorAP
Registered User
Yep thats the one! Tested them all, really good color, only one has a wayward pixel.
Old Jun 15, 2010, 01:03 AM
barok is offline
Find More Posts by barok
Registered User
barok's Avatar
had a similar cams with exposed electronics, after a few flights, some crashes, suddenly stops working, closer look a diode/resistors are missing..maybe due to vibration, i was wondering about hot glueing the entire board.

hk are sold out of those cam only.. so i ordered the 900mhz kit..only camera available heck with the tx and rx is a good buy..
Last edited by barok; Jun 15, 2010 at 07:15 AM.
Old Jun 15, 2010, 01:05 AM
Coyote64 is offline
Find More Posts by Coyote64
Praying for better weather
Coyote64's Avatar
I ordered mine a week or so ago and hobbyking have offered me a refund as they dont know when they will be back in stock
Old Jun 15, 2010, 11:02 AM
alexedit is offline
Find More Posts by alexedit
Registered User
alexedit's Avatar
please post the results
Old Jun 15, 2010, 01:53 PM
RaptorAP is offline
Find More Posts by RaptorAP
Registered User
Oh I will, a video from one of these cams speaks louder than anything I could say! Good or bad! LOL
Old Jun 15, 2010, 02:12 PM
lovegroove is offline
Find More Posts by lovegroove
http://drone-pilot.blogspot.fr
lovegroove's Avatar
I have some on the way as well, but they haven't arrived yet. Like you said, for $17 you can't go wrong.
Old Jun 15, 2010, 04:05 PM
tom83 is offline
Find More Posts by tom83
Rather be flyin
tom83's Avatar
Another good find on HK!
Thanks guys,
tom83
Old Jun 15, 2010, 10:05 PM
RaptorAP is offline
Find More Posts by RaptorAP
Registered User
Okay, trusty Supercub testbed gets the honors, again! Poor plane has had so many things tacked on and stripped off....
Mounted the camera under the wing on the right side looking forward and down slightly.
Test flights will commence soon..
Old Jun 15, 2010, 10:17 PM
alexedit is offline
Find More Posts by alexedit
Registered User
alexedit's Avatar
can't wait. I want to see hot it handles sunlight!!!
Old Jun 16, 2010, 04:50 AM
renatoa is offline
Find More Posts by renatoa
Registered User
Quote:
Originally Posted by RaptorAP View Post
Okay, trusty Supercub testbed gets the honors, again! Poor plane has had so many things tacked on and stripped off....
Mounted the camera under the wing on the right side looking forward and down slightly.
Test flights will commence soon..
Is this the so called "mummy" wing ?
Old Jun 16, 2010, 06:39 AM
GC9N is online now
Find More Posts by GC9N
MK Addict
GC9N's Avatar
were is the video!!
Old Jun 16, 2010, 06:42 AM
GC9N is online now
Find More Posts by GC9N
MK Addict
GC9N's Avatar
Quote:
Originally Posted by barok View Post
had a similar cams with exposed electronics, after a few flights, some crashes, suddenly stops working, closer look a diode/resistors are missing..maybe due to vibration, i was wondering about hot glueing the entire board.

hk are sold out of those cam only.. so i ordered the 900mhz kit..only camera available heck with the tx and rx is a good buy..
is it ok to hot glue it?
Old Jun 17, 2010, 10:49 PM
RaptorAP is offline
Find More Posts by RaptorAP
Registered User
Not sure on the hot glue, you might be able to hot glue parts to keep them from coming loose. Sorry for the delay, the 2.4ghz video transmitter I was going to use no longer works, switched to a brand new 900 mhz transmitter I was keeping as a spare, works fine, will test fly the cub with the HK camera on Saturday, will post video then!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale CCD board cam with OSD menu, custom settings CactusJackSlade Aircraft - General - Radio Equipment (FS/W) 1 May 04, 2010 01:18 AM
Discussion The exview ccd cameras claiming 0.0003 lux Carlyle Harper FPV Talk 16 Jan 27, 2010 06:36 PM
Sold NEW CX161 ccd Cameras $17.50 ea shipped arkcom Aircraft - General - Miscellaneous (FS/W) 12 Dec 12, 2008 06:51 PM
Anyone tried high Resolution CCD Board Cameras wayne Modeling Science 1 Jun 28, 2002 01:00 PM