Wild Hare Slick 540 Build help - RC Groups
Thread Tools
Jun 10, 2010, 08:35 AM
Registered User
Diesel 48's Avatar

Wild Hare Slick 540 Build help

I am about to glue my vertical and horizontal stab to this plane. Are there any tips and tricks for making these square? How do I insure the horizontal stab is level with the wing? Do you eye ball it? If the angle needs to be changed slightly how do you do that? Thanks for the tips!
Sign up now
to remove ads between posts
Jun 10, 2010, 01:41 PM
An itch?. Scratch build.
eflightray's Avatar
The eyeball is the best method. If you can, mount the wing and view the H stab for level, also view from on top to see if it looks cock-eyed.

The H stab need to be quite a way out to affect the flight. The V stab should be as in-line with the fuselage as possible. But again it has to be quite visually wrong to have much affect.

Same for the motor. For down thrust and right thrust, put the prop on, (or something flat with a hole in it), and just make sure you can visually tell that there is some slight angle in the right direction. Once flown, then the trust line can be changed to suit the flying characteristics, (usually by putting a washer space behind the motor mount, if you have one). There is no exact angle of down and right, each model can be different.

In a catastrophic mounting job, a knife and glue can solve most things.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Wild Hare Edge 540 Cowel "new version" outofsight Aircraft - Fuel - Airplanes (FS/W) 0 Nov 17, 2009 10:31 PM
Wanted Wild Hare Edge 540 88" WS plane/parts outofsight Aircraft - Fuel - Airplanes (FS/W) 3 Nov 08, 2009 11:36 AM
Wanted FUSE for Wild Hare 28% Edge 540 version 1 les2097 Aircraft - General - Miscellaneous (FS/W) 0 Jun 20, 2007 01:17 AM
Video Wild Hare Edge 540 converted to electric feathermerchant Electric Plane Talk 2 Jan 15, 2007 04:43 PM