Shop our Airplanes Products Drone Products Sales
Jan 01, 2013, 05:53 AM
I Love Tea!
Husky2000's Avatar
This looks like a good deal on a Gopro 3 Black:

http://www.fpvmodel.com/gopro-hero3-...3adde189b.html

It's new but unboxed apparently. I think even the international shipping is free too.
Sign up now
to remove ads between posts
Jan 01, 2013, 06:38 AM
If it flies.....I can crash it
Quote:
Originally Posted by Husky2000 View Post
Yeah I will, are you having success with that firmware?

I'll reset everything, balance everything and take it from there.
Just to confirm its a kk2 running the new 1.5 firm and is working like a dream, even the auto level is performing perfectly and got me out of at least two neat crash moments less then 20 mins ago.
Remember to do the acc calibration and measure the distances of the motors to check the tail is straight (if using rc explorers frame).
I can post my settings if that helps.
Jan 01, 2013, 06:55 AM
I Love Tea!
Husky2000's Avatar
Sounds like my setup is similar to yours: RC Explorer frame with wooden arms, KK2 etc etc. It used to fly quite good with the original kk but not since I upgraded. I'll do the checks you suggest and yeah if you could post your settings it will give me a starting point. Cheers.
Jan 01, 2013, 07:05 AM
Cable ties & ductape
DodgeRC's Avatar
Anyone got a Tri-copter frame they are selling, or could make?
I don't have that many tools etc to put one together =[
Jan 01, 2013, 07:05 AM
If it flies.....I can crash it
Quote:
Originally Posted by Husky2000 View Post
Sounds like my setup is similar to yours: RC Explorer frame with wooden arms, KK2 etc etc. It used to fly quite good with the original kk but not since I upgraded. I'll do the checks you suggest and yeah if you could post your settings it will give me a starting point. Cheers.
KK2 board settings on rcexplorer tricopter (3 min 20 sec)
this is the exact setup I have.
Jan 01, 2013, 07:08 AM
If it flies.....I can crash it
Quote:
Originally Posted by DodgeRC View Post
Anyone got a Tri-copter frame they are selling, or could make?
I don't have that many tools etc to put one together =[
I have loads if top and bottom frame sections all you need then are the arms and electronics. If you pm me you address I'll post you some....but to be fair chap it's so simple to make out of thin ply from rc explorers coffin pattern
Jan 01, 2013, 07:17 AM
Cable ties & ductape
DodgeRC's Avatar
Quote:
Originally Posted by blackbrabus View Post
I have loads if top and bottom frame sections all you need then are the arms and electronics. If you pm me you address I'll post you some....but to be fair chap it's so simple to make out of thin ply from rc explorers coffin pattern
Ahh cheers, the ones I saw were all fibreglass looking!
Where's the best place to source some wooden arms from?
Jan 01, 2013, 07:22 AM
I Love Tea!
Husky2000's Avatar
B&Q, 10mm square pine. Actually I think mine are more like 12 x 10 but it doesn't seem to matter.
Jan 01, 2013, 07:27 AM
I Love Tea!
Husky2000's Avatar
Quote:
Originally Posted by blackbrabus View Post
Cheers man I'll start there. What props you using? I've got these:

http://www.giantshark.co.uk/slow-pro...-p-402392.html
Jan 01, 2013, 07:43 AM
Still flying a desk..
ChilternFlyer's Avatar
Happy new year guys!!

A little new year's present for my daughter.
Jan 01, 2013, 07:46 AM
If it flies.....I can crash it
B and Q arms work fine for me also.
I use 11 x 4.7 props with 750 kv motors and get about 7 min flight time on a 3s 2200
But I'm sure 10 will be fine
Jan 01, 2013, 08:10 AM
Just clumsy. Oh, forgetful too
MikeTheCrash's Avatar
Happy New Year everybody!

We are just now back in the house I burned down with a lipo fire at the end of June. Christmas and New Year have seen a lot of entertaining, packing, removals, building of ikea furniture, hanging pictures etc etc etc. Due to work, weather, family and so on I have only flown FPV once since the fire! It's been great to keep up with the UK gang through these pages.

Hopefully 2013 will bring more flying time! Surely the weather can't be as bad this year...

mike
Jan 01, 2013, 08:57 AM
DD FPV is where it's at
Rob UK's Avatar
Quote:
Originally Posted by ChilternFlyer View Post
Happy new year guys!!

A little new year's present for my daughter.
Cool
Jan 01, 2013, 09:07 AM
What was that...
StealthWorkx's Avatar
Happy new year one and all





Quote:
Originally Posted by Husky2000 View Post
This looks like a good deal on a Gopro 3 Black:

http://www.fpvmodel.com/gopro-hero3-...3adde189b.html

It's new but unboxed apparently. I think even the international shipping is free too.
It's cheaper from here http://www.rc4y.com/rc4y-gopro3-hero...ion-p-513.html
Jan 01, 2013, 09:13 AM
I Like Popcorn
flylite's Avatar
Quote:
Originally Posted by StealthWorkx View Post
Happy new year one and all



It's cheaper from here http://www.rc4y.com/rc4y-gopro3-hero...ion-p-513.html

Hey Owen! Happy New Year!



Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion FPV Car and Other Fun FPV Projects Thread: Crash9 FPV Talk 11473 Mar 21, 2017 04:33 AM
Discussion UK to France FPV srjs FPV Talk 107 Jan 26, 2017 12:41 PM
For Sale FPV Stuffs UK QUIKSILVER Aircraft - General - Radio Equipment (FS/W) 19 Jan 31, 2016 02:37 PM
Discussion can we have a uk section in the for sales thread please? kieran3008 Site Chat 28 Apr 17, 2014 02:13 PM
Discussion FPV WARS (Thread for FPV "B" Movies) ch1 FPV Talk 8 Sep 16, 2009 05:37 PM