UK FPV Thread - Page 1198 - RC Groups
Thread Tools
Dec 12, 2012, 02:44 PM
Cable ties & ductape
DodgeRC's Avatar
Quote:
Originally Posted by mudlark
I'd say an out and out race
Rear facing #18s a must
And quad splitter tv input
Sign up now
to remove ads between posts
Dec 12, 2012, 03:09 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by DodgeRC
Rear facing #18s a must
And quad splitter tv input
You wouldn't get time to check behind, you'll just have to hope for the best
Dec 12, 2012, 03:10 PM
If it flies.....I can crash it
Quote:
Originally Posted by flylite
Aye, I love em, 4S needed though!
Mines set up as a FPV pocket rocket and is rapid, not the best camera ship mind.

What do you expect to do with this? Just general fpv flying?

Owen has made an awesome strider quads that I think he will be selling soon, worth checking them out.


Sounds good to me.....I'm after general FPV but with the ability to go like a rocket when needed......I'm not after a super steady cam setup.....POWERRRRRR

I guess you mean a strider quad because of the shape and not a particular manufacturer.

so silly question on a 4s setup what motor, ESC, Prop setup would = ballistic speed?
Dec 12, 2012, 03:11 PM
If it flies.....I can crash it
Quote:
Originally Posted by DodgeRC
Rear facing #18s a must
And quad splitter tv input
you would need PIP to make it work, but then would it pick up another quad going that fast?
Dec 12, 2012, 03:14 PM
Still flying a desk..
ChilternFlyer's Avatar
Quote:
Originally Posted by blackbrabus
so I'm looking into building a fast quad (a racer if you like) and was wondering if anyone had used the really cheap hobbyking v1 frame.....is it any good? its only a tenner and i dont expect miracles but its very light when compared to CF.
also does anyone know whats the highest power setup you could get out of a 3s pack.

i was thinking http://www.giantshark.co.uk/221206-2...-p-402397.html swinging a 6 4.7 prop......am I thinking the right thing in relation to power or am I blowing smoke as i seem to be doing alot today.
What, you mean a quad a bit like this:
HK450 frame
AXN 2213 800kv motors
Simon K mystery blue 12A ESCs
FY90 flight controller

Runs on a 2200 3S pack. It currently has 8*4.5 props on it but will take 10*4.5s
I made it from my large inventory of spares. It's for sale if you're interested.
Dec 12, 2012, 03:46 PM
If it flies.....I can crash it
Quote:
Originally Posted by ChilternFlyer
What, you mean a quad a bit like this:
HK450 frame
AXN 2213 800kv motors
Simon K mystery blue 12A ESCs
FY90 flight controller

Runs on a 2200 3S pack. It currently has 8*4.5 props on it but will take 10*4.5s
I made it from my large inventory of spares. It's for sale if you're interested.
that was the sort of thing i was thinking, and i would be interested to know what its going for as I'm looking at options.
the HT FPV frame has caught my eye but that would require all new lipos in 4s so more outlay......so like i say, looking at options.
Dec 12, 2012, 05:46 PM
Still flying a desk..
ChilternFlyer's Avatar
Quote:
Originally Posted by blackbrabus
that was the sort of thing I was thinking, and I would be interested to know what its going for as I'm looking at options.
the HT FPV frame has caught my eye but that would require all new lipos in 4s so more outlay......so like I say, looking at options.
Everthing that went on this frame was new. I've used it as a test bed for various flight controllers (MWC, ArduMega Pirate etc). It currently has an Fy-tech FY90 flight controller on it.
How does 65 shipped (first class recorded) sound?
I'll even throw in a spare set of new 8*4.5 props to get you going.

I have some spare 800kv motors and also a bucket full of the AXN2210 -1000kv motors. If you mange to break a motor or two.
Dec 12, 2012, 06:12 PM
Registered User
Aviefly's Avatar
Quote:
Originally Posted by mudlark
Read this
Thanks for posting that article, interesting read that I wouldn't have got to see being in the SAA (Scottish Aeromodellers Association) up here and not the BMFA. Seems the guy has a good level view of things if you excuse the pun.
Dec 12, 2012, 06:26 PM
If it flies.....I can crash it
Quote:
Originally Posted by ChilternFlyer
Everthing that went on this frame was new. I've used it as a test bed for various flight controllers (MWC, ArduMega Pirate etc). It currently has an Fy-tech FY90 flight controller on it.
How does 65 shipped (first class recorded) sound?
I'll even throw in a spare set of new 8*4.5 props to get you going.

I have some spare 800kv motors and also a bucket full of the AXN2210 -1000kv motors. If you mange to break a motor or two.
Sounds good to me......would you hold the quad until the 1st Jan as its a heavy month with kids and the Mrs would kill me if I got that delivered lol.
Dec 12, 2012, 06:54 PM
Still flying a desk..
ChilternFlyer's Avatar
Quote:
Originally Posted by blackbrabus
Sounds good to me......would you hold the quad until the 1st Jan as its a heavy month with kids and the Mrs would kill me if I got that delivered lol.
LOL. yeah. No problem. It's just sitting here in my office.
I don't have a wife to worry about but I think my kids will notice my new 3D printer arriving shortly. I'm sure there will be questions asked about that!

Here's a quick video of it's last experimental flight - first try of the Simon K firmware. It was doing lots of stick stirring and 'up and drops'.
Testing Simon K firmware (3 min 30 sec)
Dec 12, 2012, 08:23 PM
Happy Days
mudlark's Avatar
No I'm resisting the temptation to buy a 3D printer.
But it's hard to resist.
Dec 12, 2012, 08:35 PM
Registered User
Angelos's Avatar
Quote:
Originally Posted by mudlark
No I'm resisting the temptation to buy a 3D printer.
But it's hard to resist.
Next on my list! ... added to the list a couple of months ago but I wanted to buy some other workshop tools first and tidy up my milling machines first.

-Angelos
Dec 12, 2012, 08:39 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by Angelos
Next on my list! ... added to the list a couple of months ago but I wanted to buy some other workshop tools first and tidy up my milling machines first.

-Angelos
I'm going to try my best to keep my hands in my pockets on this one. Don't really want to shop it over to Seattle at the end of next year.
I'm sure Mitch will let me play with his.

Printer that is
Dec 13, 2012, 04:52 AM
Still flying a desk..
ChilternFlyer's Avatar
Quote:
Originally Posted by mudlark
I'm going to try my best to keep my hands in my pockets on this one. Don't really want to shop it over to Seattle at the end of next year.
I'm sure Mitch will let me play with his.

Printer that is
best offer I've had all year!
Dec 13, 2012, 05:15 AM
Fixed wings can be Drones too!
Wayno Complaino's Avatar
Snuck out and found a spot to fly from, wont have time until Friday though.

That beach will make the perfect strip...

Name: ImageUploadedByTapatalk1355393675.131691.jpg
Views: 98
Size: 60.6 KB
Description:


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion FPV Car and Other Fun FPV Projects Thread: Crash9 FPV Talk 11770 Yesterday 09:37 AM
Discussion UK to France FPV srjs FPV Talk 107 Jan 26, 2017 01:41 PM
For Sale FPV Stuffs UK QUIKSILVER Aircraft - General - Radio Equipment (FS/W) 19 Jan 31, 2016 03:37 PM
Discussion can we have a uk section in the for sales thread please? kieran3008 Site Chat 28 Apr 17, 2014 03:13 PM
Discussion FPV WARS (Thread for FPV "B" Movies) ch1 FPV Talk 8 Sep 16, 2009 06:37 PM