Thread Tools
Nov 23, 2012, 02:29 AM
If it flies.....I can crash it
I spotted the child as he bounced off the bonnet of my car.
Sign up now
to remove ads between posts
Nov 23, 2012, 02:44 AM
Just clumsy. Oh, forgetful too
MikeTheCrash's Avatar
CJ you need to make a web-enabled robot to clear the print deck for you and remote access your PC to start the next thing.
Nov 23, 2012, 02:53 AM
um.. yeah, I can make that fly
Carlos230023's Avatar
Lol if only it were that easy mike. The print space (after each print has been removed) needs to be heated. Then coated with an acetone/ABS slurry, roughing up the ABS as the acetone evaporates off to make a thin rough layer to print to. While this insures that the part never lifts during printing, I'm afraid it's not massively robot friendly. Unless I had a remote controlled arm with paint brush to apply the acetone. The other small issue is actually getting work done in between operating a robotic arm from my iPhone over 3G :P. a lengthy process methinks :P.

CJ
Nov 23, 2012, 10:56 AM
Cable ties & ductape
DodgeRC's Avatar
Nice winter project methinks =]
Hubsan X4 H107 Fpv (1 min 28 sec)
Nov 23, 2012, 11:34 AM
um.. yeah, I can make that fly
Carlos230023's Avatar
Quote:
Originally Posted by DodgeRC
Nice winter project methinks =]
https://www.youtube.com/watch?v=ABFG34laMWs
That looks like lots of fun :P

CJ
Nov 23, 2012, 01:25 PM
I Like Popcorn
flylite's Avatar
CJ - is this the mini cam you have ?
http://www.bevrc.com/bev50mw-24g-wir...-cam_p217.html

Ta
Nov 23, 2012, 02:04 PM
um.. yeah, I can make that fly
Carlos230023's Avatar
Quote:
Originally Posted by flylite
CJ - is this the mini cam you have ?
http://www.bevrc.com/bev50mw-24g-wir...-cam_p217.html

Ta
Yup, but I got my one from foxtec, and its 5.8ghz. Be weary, that MASSIVE plug isn't just a barrel connector, it's got a Ubec inside it, to drop the 5V input to 3.3v. You can directly connect 3.3v but it requires a bit of VERY fiddly soldering. Not just adding a red and black lead either, two pins need bridging to use it on a 1s lipo. Worth it for the weight saving though.

CJ
Nov 23, 2012, 02:06 PM
I Like Popcorn
flylite's Avatar
Yeah, ok great tip there CJ - It would be breathing out magic smoke if you had not stated that!
Thanks!
Nov 23, 2012, 02:17 PM
Cable ties & ductape
DodgeRC's Avatar
Them cams do look ace =]

Btw anyone using an Archos AV 500 or 700 for recording?
Just wondering if it can be used as an FPV screen as well as record??
Nov 23, 2012, 02:22 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by DodgeRC
Them cams do look ace =]

Btw anyone using an Archos AV 500 or 700 for recording?
Just wondering if it can be used as an FPV screen as well as record??
Got an AV500 ( I think that what it is) kocking around some where.
Used it as a flight recorder for a while. Only problem was that if I left recording then I could not transfer it to a PC something about a copy write issue??
Wasn't bad as a cheap back up.
Nov 23, 2012, 03:10 PM
If it flies.....I can crash it
So I need a winter project and got no ideas......maybe a quad??
Nov 23, 2012, 03:29 PM
Fixed wings can be Drones too!
Wayno Complaino's Avatar
FPV Submarine?
Nov 23, 2012, 03:31 PM
If it flies.....I can crash it
Quote:
Originally Posted by Wayno Complaino
FPV Submarine?
I better not....it would only sink
Nov 23, 2012, 03:36 PM
Fixed wings can be Drones too!
Wayno Complaino's Avatar
Making lots of progress with the Cularis this evening. I've cut out so much foam to make way for FPV gear that I hope she holds up. Could have had it finished this evening but I forgot to replace the busted ESC. Gonna have to wait until payday now...

Can't wait to fly her FPV.
Nov 23, 2012, 03:40 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by blackbrabus
So I need a winter project and got no ideas......maybe a quad??
A quad

so last year


NOT !!!!!!

You can never have to many quads


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion FPV Car and Other Fun FPV Projects Thread: Crash9 FPV Talk 11619 Jun 18, 2017 09:50 AM
Discussion UK to France FPV srjs FPV Talk 107 Jan 26, 2017 12:41 PM
For Sale FPV Stuffs UK QUIKSILVER Aircraft - General - Radio Equipment (FS/W) 19 Jan 31, 2016 02:37 PM
Discussion can we have a uk section in the for sales thread please? kieran3008 Site Chat 28 Apr 17, 2014 02:13 PM
Discussion FPV WARS (Thread for FPV "B" Movies) ch1 FPV Talk 8 Sep 16, 2009 05:37 PM