UK FPV Thread - Page 1134 - RC Groups
Thread Tools
Nov 15, 2012, 05:51 PM
If it flies.....I can crash it
Quote:
Originally Posted by MikeTheCrash

Needs dragon link.

has a starlight camera on it but the torch is amazing in the back yard. on the road the streetlighting will be enough.
Dragon OSD of course. Might play with some waypoints later!
is the Dragon OSD v2 any good for a noob, i was just looking at them and noticed your post.
any ideas if I will be able adjust settings inflight with a DX6i??
Sign up now
to remove ads between posts
Nov 15, 2012, 06:31 PM
Still flying a desk..
ChilternFlyer's Avatar
Quote:
Originally Posted by blackbrabus
is the Dragon OSD v2 any good for a noob, i was just looking at them and noticed your post.
any ideas if I will be able adjust settings inflight with a DX6i??
Yes and Yes!

The Dragon OSD was my second OSD. I wish I'd bought one the first time!
Small and light, 10 hz GPS and return to home failsafe function.
You can fly it literally plugged into just your gear channel (or use the flight mode switch on a DX6i to get three positions if you are going want to adjust the settings , use the autopilot and RTH). Once it's set up it's great. The RTH function is brilliant. I've watched my skywalker turn around and fly home from 1KM away. Your plane comes home and circles 100M above your home position and keeps doing it until you take control (or runs out of battery).
I've got 2 of them already.
Nov 15, 2012, 07:13 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by ChilternFlyer
Yes and Yes!

The Dragon OSD was my second OSD. I wish I'd bought one the first time!
Small and light, 10 hz GPS and return to home failsafe function.
You can fly it literally plugged into just your gear channel (or use the flight mode switch on a DX6i to get three positions if you are going want to adjust the settings , use the autopilot and RTH). Once it's set up it's great. The RTH function is brilliant. I've watched my skywalker turn around and fly home from 1KM away. Your plane comes home and circles 100M above your home position and keeps doing it until you take control (or runs out of battery).
I've got 2 of them already.
=1
The dogs danglies.

I've got three well two really one is in a forest due to not setting it up right.
Yes they are great but they are not plug and play.
But ask a question here and you'll get several helpful answers.
Nov 15, 2012, 07:14 PM
Happy Days
mudlark's Avatar
CJ

Will you be able to pass on my plastic to Wayne for Saturday night??
Nov 15, 2012, 07:43 PM
If it flies.....I can crash it
Quote:
Originally Posted by ChilternFlyer
Yes and Yes!

The Dragon OSD was my second OSD. I wish I'd bought one the first time!
Small and light, 10 hz GPS and return to home failsafe function.
You can fly it literally plugged into just your gear channel (or use the flight mode switch on a DX6i to get three positions if you are going want to adjust the settings , use the autopilot and RTH). Once it's set up it's great. The RTH function is brilliant. I've watched my skywalker turn around and fly home from 1KM away. Your plane comes home and circles 100M above your home position and keeps doing it until you take control (or runs out of battery).
I've got 2 of them already.
That's great to know thanks, other than the GPS unit and current sensor do you need the other one (temp).L
Nov 15, 2012, 07:47 PM
Happy Days
mudlark's Avatar
no you're good.
I have an artificial horizon for mine but they are not easy to get hold of. Also a pitot tube for actual air speed.
What you will need is a RX that can send PPM to the DOSD. That's the only input it takes.
Last edited by mudlark; Nov 15, 2012 at 08:12 PM. Reason: typo
Nov 15, 2012, 07:47 PM
Just clumsy. Oh, forgetful too
MikeTheCrash's Avatar
Quote:
Originally Posted by ChilternFlyer
LOL I wasn't worried about loosing a few. I was worried about people slipping on them later!
I know. Just kidding

Quote:
Originally Posted by ChilternFlyer
Mike; are you bringing the truck on Saturday then?
Well I made it portable to put on the tank but I have just spent the last few hours installing it in the truck with a dragon link. The idea was to knock up a quick bodge to test the dragon tracker but I got carried away. suppose I had better bring it along!.

Quote:
Originally Posted by blackbrabus
is the Dragon OSD v2 any good for a noob, i was just looking at them and noticed your post.
any ideas if I will be able adjust settings inflight with a DX6i??
I think it's great but as the proprietor of dragonlabs.eu shop I am probably a bit biased. It isn't plug and play, and you will probably end up doing some soldering to make leads but I can help with that.
Nov 15, 2012, 07:51 PM
Just clumsy. Oh, forgetful too
MikeTheCrash's Avatar
Quote:
Originally Posted by mudlark
no your good.
I have an artificial horizon for mine but they are not easy to get hold of. Also a pitot tube for actual air speed.
What you will need is a RX that can send PPM to the DOSD. That's the only input it takes.
We now have fy30 in the shop and translator boards for ahi, we also have ppm encoders! I
Nov 15, 2012, 07:57 PM
If it flies.....I can crash it
Quote:
Originally Posted by mudlark
no your good.
I have an artificial horizon for mine but they are not easy to get hold of. Also a pitot tube for actual air speed.
What you will need is a RX that can send PPM to the DOSD. That's the only input it takes.
Not done much research on the osds yet but does a dx6i send the correct signal or whatever a ppm is??
Nov 15, 2012, 08:02 PM
If it flies.....I can crash it
Quote:
Originally Posted by MikeTheCrash
I know. Just kidding



I think it's great but as the proprietor of dragonlabs.eu shop I am probably a bit biased. It isn't plug and play, and you will probably end up doing some soldering to make leads but I can help with that.
Good to know your easy to get hold of.....still testing my cam and vx vt systems but I'm liking the dragon osd, just downloaded the manual so hope that should give me an idea of how hard its gonna be to sort out.
Nov 15, 2012, 08:07 PM
What was that...
StealthWorkx's Avatar
hi guys i'll not be able to make it to the indoor meet at twickers this time around, but looking forward to the one on the 1st dec (right?)
Hope you have fun
o
Nov 15, 2012, 08:14 PM
If it flies.....I can crash it
So looks like its about 211 quid for the osd kit and the stabilizer delivered .....that sounds good to me, my only concern now is finding space in the bixler and the cables required.
Nov 15, 2012, 08:14 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by StealthWorkx
hi guys i'll not be able to make it to the indoor meet at twickers this time around, but looking forward to the one on the 1st dec (right?)
Hope you have fun
o
Oh dear
You'll miss the opportunity to stroke my GoPro 3

Nov 15, 2012, 08:23 PM
Happy Days
mudlark's Avatar
Quote:
Originally Posted by blackbrabus
So looks like its about 211 quid for the osd kit and the stabilizer delivered .....that sounds good to me, my only concern now is finding space in the bixler and the cables required.
i'm just fitting out my Bixler 2 so is Mike.
I have cut a window out of the side under the wing to get to the space.
There is enough room for the DOSD and other wiring in there.
Nov 16, 2012, 02:30 AM
Just clumsy. Oh, forgetful too
MikeTheCrash's Avatar
Quote:
Originally Posted by blackbrabus
Not done much research on the osds yet but does a dx6i send the correct signal or whatever a ppm is??
Quote:
Originally Posted by blackbrabus
So looks like its about 211 quid for the osd kit and the stabilizer delivered .....that sounds good to me, my only concern now is finding space in the bixler and the cables required.
You don't need the stabiliser, it's just a plaything really.

It all fits in the Bix. I leave mine unglued (I prised the two halves apart) and tape it together until I havefinished fiddling with the setup.

Mudlark and I both ended up upgrading the motor and prop. Still not maidened though. Next time I open it up I will post a pic


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion FPV Car and Other Fun FPV Projects Thread: Crash9 FPV Talk 11769 Oct 28, 2017 11:06 AM
Discussion UK to France FPV srjs FPV Talk 107 Jan 26, 2017 01:41 PM
For Sale FPV Stuffs UK QUIKSILVER Aircraft - General - Radio Equipment (FS/W) 19 Jan 31, 2016 03:37 PM
Discussion can we have a uk section in the for sales thread please? kieran3008 Site Chat 28 Apr 17, 2014 03:13 PM
Discussion FPV WARS (Thread for FPV "B" Movies) ch1 FPV Talk 8 Sep 16, 2009 06:37 PM