Thread Tools
Jun 07, 2010, 02:54 AM
Registered User
CrashingDutchman's Avatar
New Product

Turnigy 9X 2.4GHz 8Ch Receiver (V2) - US$ 8.99


Hobbyking also sells Turnigy 9X 2.4GHz 8Ch receivers now: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12339

Price is US$ 8.99 and that is unbelievably low, I think.

Sign up now
to remove ads between posts
Jun 07, 2010, 01:58 PM
Registered User
Wow, that is a bargain!
Jun 07, 2010, 02:25 PM
Registered User
Is this supposed to be a full range Rx? I am surprised that it does not have dual antennas or, lacking that, a satellite Rx although there does appear to be a port on the side for one.
Jun 07, 2010, 02:48 PM
Registered User
I am not sure about range. Maybe someone in the big Turnigy radio thread here can enlighten you: https://www.rcgroups.com/forums/show....php?t=1035575

Edit: You could always ask the Hobbyking Customer Support. There is a link on this page in the Live Online Chat section during opening hours: http://hobbyking.com/hobbyking/store/uh_contactUs.asp
Jun 07, 2010, 05:08 PM
Registered User
earlwb's Avatar
Looks like a nice receiver, they state it is a "full range" receiver too. so it ought to be fine.
But do test it for a while in a old beater plane first, before you commit to something you don't want to crash.
must be popular it sold out about as fast as they got a bunch in.
Jun 07, 2010, 09:31 PM
Registered User
It is sold as full range and has a balun on the single antenna making it just like the Hitec "BODA" antenna solution.

It has the same plastic case as the V1 Rx which did have a satellite Rx however this one does not and users have reported that there is no socket on the PCB inside that hole in the case.

IMO this crazy low price is intended to seed the market with this system to it can gain some credibility. Later the price will probably go back up close to the (still very low!) $20 mark.
Jun 07, 2010, 11:54 PM
Registered User
WimH's Avatar
I wonder how you bind it. I'm not seeing any lights come on when I power it???
Jun 08, 2010, 01:44 AM
Registered User
I don't know for sure but for most of these systems:

a) Put the bind plug on the Rx and power it on
b) Press the bind button on the Tx module and turn on the Tx
c) Wait for various LEDs to light up or change colour/stop blinking.
d) Take finger off bind button
e) Turn off power to Rx (and sometimes Tx)
f) Remove bind plug from Rx
Jun 08, 2010, 01:25 PM
Registered User
WimH's Avatar
tried that , still no lights.
Jun 08, 2010, 05:50 PM
Registered User
Quote:
Originally Posted by WimH View Post
tried that , still no lights.
Check the polarity of the power connection from the ESC. If it's reversed, no light.

I missed the light when I first bound mine, but the servos connected to the receiver responded right away.
It's buried in the center of the receiver and I could only see it looking straight down from the top.
Jun 08, 2010, 11:02 PM
Suspended Account
Is this V2 receiver compatible with the original Turnigy TX?

Is Turnigy TX V2 compatible with Hobby King 2.4 receivers?

In other words, are V1 and V2 compatible?
Jun 09, 2010, 02:56 AM
Registered User
Not as far as anyone can tell so far and it seems unlikely.
Jun 10, 2010, 12:52 PM
Registered User
WimH's Avatar
Quote:
Originally Posted by EFlyBob View Post
Check the polarity of the power connection from the ESC. If it's reversed, no light.
Did already try both ways, no difference.Strange thing is servo does not seem to get any power at all. I'll have to open it up to see which connection(s) is (are) missing...

edit: It's working now, I have seen the light.... The only thing I did different was turn TX off and then back on again after removing the bind plug...., could also be that the receiver battery was too low in voltage...
Last edited by WimH; Jun 10, 2010 at 01:08 PM.
Aug 03, 2010, 08:41 AM
Registered User
Got the with the new v2 transmitter yesterday, everything works great, but after letting it sit for a while, it has to be rebound? any ideas?
Aug 03, 2010, 10:56 AM
Suspended Account
Quote:
Originally Posted by WimH View Post
edit: It's working now, I have seen the light.... The only thing I did different was turn TX off and then back on again after removing the bind plug...., ...
After binding procedure, you must turn off both TX and RX before operation begins.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Turnigy 9X 2.4Ghz Tx setup HeavyCruser9 Scale Boats 35 Sep 21, 2010 08:18 PM
Question Turnigy TGY 9X with Corona 2.4Ghz - Very short range giluriel Radios 5 Aug 01, 2010 10:20 AM
Sold Turnigy 9X, with Spektrum Module 2.4ghz $90 Shipped crd Aircraft - General - Radio Equipment (FS/W) 5 May 15, 2010 09:45 AM
New Product Hobby King HK-8X 2.4Ghz Receiver 8Ch (V2) CrashingDutchman Radios 2 May 13, 2010 10:04 AM
For Sale 3x Hobby King 2.4Ghz Receiver 8CH, $45 shipped, USA rmteo Aircraft - General - Radio Equipment (FS/W) 2 Dec 10, 2009 09:09 AM