New Products Flash Sale
Thread Tools
Old Nov 24, 2011, 11:03 PM
fcbflyer is offline
Find More Posts by fcbflyer
Sloping the Financial Cliff
fcbflyer's Avatar
Here is my Tanga F3B set up. Software 1.08.1

Special Notes:

Since the Flap/B-fly menu still sucks I figured out following work around;
Chanel set up:
Flap Chanel= Null
Falp 2 Chanel= Null
Aux 1= J3 (throttle stick)

Flap Con:
Flap: 100%/100%
Flap2 :100%/100%
Switch: Null
Adjust Funtion:
Switch: LT
Rate: 100% (then hit LT until the Flap servos are 100% offset )

At this point you get +-100% flap travel but max Servo throw is +-150% and you miss out on a considerable amount of throw.
To move the Servo in the lower part to 150% (max travel) do following:
P. Mix 1 Aux 1->Flap
P. Mix 2 Aux 1->Flap 2

Then move the throttle stick down and add servo travel by increasing the mix value. (make sure your T-Stop and EPA are set to max)
I did it this way because I like the Offset function in the B-fly menu but I needed max throw.

I used a flight condition on Launch instead of the Launch Menu because flight conditions can be assigned a priority and the Camber Mix and Aileron Dif and V-tail menus can be used to adjust the rates in accordance with the flight conditions. That's why I don't have D/R set up just expo.

Anything else is pretty standard.
Sign up now
to remove ads between posts
Old Dec 16, 2011, 02:28 AM
harleyfrog2000 is offline
Find More Posts by harleyfrog2000
Registered User

Ultra Stick 40


Would you please tell me how you set the aurora 9 for an ultra stick (glow)? I want crow mix and also ailerons and flaps to work together as ailerons. Thank you. Rick S.
Last edited by harleyfrog2000; Dec 16, 2011 at 01:46 PM.
Old Dec 16, 2011, 04:36 PM
Dan.Cummins is offline
Find More Posts by Dan.Cummins
Launching!
Dan.Cummins's Avatar
Butterfly for crow, aileron-flap for mixing the aileron and flap control surfaces.

DC
Old Dec 16, 2011, 05:12 PM
harleyfrog2000 is offline
Find More Posts by harleyfrog2000
Registered User

Ultra Stick 40


Thank you. Rick S.
Last edited by harleyfrog2000; Dec 17, 2011 at 09:21 AM.
Old Dec 20, 2011, 10:38 PM
Eddie.C is offline
Find More Posts by Eddie.C
Posse Member
Eddie.C's Avatar
Quote:
Originally Posted by fcbflyer View Post
Here is my Tanga F3B set up. Software 1.08.1

Special Notes:

Since the Flap/B-fly menu still sucks I figured out following work around;
Chanel set up:
Flap Chanel= Null
Falp 2 Chanel= Null
Aux 1= J3 (throttle stick)

Flap Con:
Flap: 100%/100%
Flap2 :100%/100%
Switch: Null
Adjust Funtion:
Switch: LT
Rate: 100% (then hit LT until the Flap servos are 100% offset )

At this point you get +-100% flap travel but max Servo throw is +-150% and you miss out on a considerable amount of throw.
To move the Servo in the lower part to 150% (max travel) do following:
P. Mix 1 Aux 1->Flap
P. Mix 2 Aux 1->Flap 2

Then move the throttle stick down and add servo travel by increasing the mix value. (make sure your T-Stop and EPA are set to max)
I did it this way because I like the Offset function in the B-fly menu but I needed max throw.

I used a flight condition on Launch instead of the Launch Menu because flight conditions can be assigned a priority and the Camber Mix and Aileron Dif and V-tail menus can be used to adjust the rates in accordance with the flight conditions. That's why I don't have D/R set up just expo.

Anything else is pretty standard.
Oh Boy!
Old Feb 19, 2012, 05:13 PM
Ashley123 is offline
Find More Posts by Ashley123
Registered User

RCRCM Typhoon 2m setup file request


Anyone have a setup file for the typhoon 2m


Thanks in advance

Ashley
Old Mar 12, 2012, 10:22 PM
frankswd is offline
Find More Posts by frankswd
Registered User
frankswd's Avatar
Anyone programmed a glider with 6 servo wing Aleron, Mid flap, Flap and tow release and willing to share This is for my scale Lunak.
Old Mar 23, 2012, 10:29 PM
Fidelity101 is online now
Find More Posts by Fidelity101
Go fast, pull up.
Fidelity101's Avatar
Is there a place where all of these files can be shared? I'm looking for a Scimitar configuration and a configuration for the Hobby Lobby Su-34 with twin thrust vectoring.
Old Mar 23, 2012, 11:43 PM
LowWatts is offline
Find More Posts by LowWatts
Seattle, WA
This is the place where setup files for the Aurora 9 are shared.
Old Mar 24, 2012, 03:08 AM
A.T. is offline
Find More Posts by A.T.
Registered User
Quote:
Originally Posted by Fidelity101 View Post
Is there a place where all of these files can be shared? I'm looking for a Scimitar configuration and a configuration for the Hobby Lobby Su-34 with twin thrust vectoring.
From FAQ page:

Aurora 9 - Model Set Up & Templates Program (Model) Templates.
(Download existing Set Ups and transfer to your Aurora. Upload & share your own set ups/solutions.)


Templates loaded to above are then indexed under post #40 this thread:
Aurora 9 - Template Index: Acro, Glider, Helicopter, Rock Crawler, Tanks, Simulator.

Alan T.
Alan's Hobby, Model & RC FAQ Web Links
Old Mar 29, 2012, 12:57 AM
firehawkzach is offline
Find More Posts by firehawkzach
Registered User
firehawkzach's Avatar
I would be interested to see if anyone has a set up for a thrust vectoring, flaps, retract, rudders set up. I am using an optima 9 channel on this F-18. I don't care about airbrakes but it might be cool. I will have TV on a switch. I will post my set up when I get it done, still in the final stages of the build.
Old Mar 29, 2012, 03:43 PM
Fidelity101 is online now
Find More Posts by Fidelity101
Go fast, pull up.
Fidelity101's Avatar
I setup the scimitar using an optima 7 and it was a PITA compared to my spektrum dx7...but I think the end result will be better. I used elevator to aileron mixing after setting the model up as a delta wing and it was difficult trimming throws for low and high rates as the mechanical linkage was not perfectly aligned.
Old May 05, 2012, 05:36 AM
usmc5811 is offline
Find More Posts by usmc5811
Registered User
usmc5811's Avatar
Did not know this thread existed. Anyone have a Gaui 500x setup for the Aurora 9?
Old May 05, 2012, 06:35 AM
Fidelity101 is online now
Find More Posts by Fidelity101
Go fast, pull up.
Fidelity101's Avatar
Are you using the gu344 or the Naza? It makes a difference in terms of EPA and what not. I have a setup using the Naza and I have switch f to go from ATTI mode to manual mode.
Old May 05, 2012, 06:51 AM
usmc5811 is offline
Find More Posts by usmc5811
Registered User
usmc5811's Avatar
Right should have mentioned that - I have the GU-344.

I can't get the quad off the ground without it tilting towards the #2 - #3 blades. So I reversed the facing of the GU-344 and the quad still tilts towards the #2 - #3 blades. I thought #1 - #4 blades were supposed to be the front.

And I need to know how this GU-344 works. I know it stabilizes, but is it automagical or do I need to invoke something.

Anyways if anyone can give me some pointers using this setup with the Aurora 9 that would be great.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Who has good cheap VPP set ups? epoweredrc Indoor Pattern/F3P 22 May 15, 2010 09:56 PM
Discussion Succsesful Power 160 Set-ups? tlh101 Power Systems 1 Apr 08, 2010 12:41 AM
Discussion 4g3 issues brushless set-ups. user0125 Micro Helis 8 Mar 17, 2010 01:59 AM
Sold Parkzone 2.4 Set ups x 2!!! DbleX Aircraft - General - Radio Equipment (FS/W) 2 Oct 14, 2009 02:36 PM
Discussion Power Set Ups - A tool for the Beginner GeorgeG97322 Scale Kit/Scratch Built 7 Sep 26, 2009 01:53 PM