MiG 25 Foxbat Fighter Jet Rocket - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 31, 2010, 08:15 AM
If it flies, I crash it!
dlazarus6660's Avatar

MiG 25 Foxbat Fighter Jet Rocket

I just finished this Mig-25 Fighter Jet project this past W/E.
I took it to a Boy Scout meeting on Monday past and Harold and I did a presantation to the Scouts on model rocketry.
They seem to like it.
The MiG is D/E powered. It's heavy, it weighs almost 4 oz.(120grams)
18 inch chute will provide recovery.
14.75" BT-55 body and with nose cone, it is 19" long with 3/32 medium hard balsa for fins.
I enlarged an Estes Strike Eagle for the engine pods.
I think it looks neat.
And no I have not flown this yet but I'm sure it will fly.
Sign up now
to remove ads between posts
Oct 24, 2010, 07:11 AM
If it flies, I crash it!
dlazarus6660's Avatar

It Flies!

It Flies!

Finally I fly the MIG. I brought it to CMASS today. I did not have a motor for it but I was hoping to buy or trade for one.
Better yet I got one donated by a fellow CMASS member and new found friend Mark A.
He wanted to see it fly. As did I.

Thank you Mark.

Check out the pic and video.


MIG-25 Foxbat Rocket @ CMASS Launch Amesbury 10-23-10 (0 min 42 sec)
Oct 24, 2010, 09:45 AM
Registered User
I think its about time you started to provide some plans! Richard ex-tellus temporarily.
Oct 26, 2010, 06:28 PM
If it flies, I crash it!
dlazarus6660's Avatar

I would if I knew how?


I would provide plans if I knew how to provide them.
I have parts and measurments which I will post but I use the TKLR method.
(Thats Kinda Looks Right)
I have a friend trying to build one now to see if he can clone one with what I gave him.

Oct 26, 2010, 07:02 PM
If it flies, I crash it!
dlazarus6660's Avatar



BT-55 14.75" long
BT-5 9.5" long Cut in half lengthwise(turtledeck)
Bullpup Nose Cone
BNC-5W Nose cone ogive type cut in half lengthwise(turtledeck)
BNC-5V Nose cone rounded type cut in half lengthwise(cockpit)
3/32" C-grain hard balsa 4" wide
"D" or "E" Motor Mount.
1/4" triangle stock

I used the Estes Screaming Eagle kit for the tube marking guide(enlarged)
and on the build of the wings and engine tubes.

If anyone trys to build the MIG, pm me if you have any questions or concerns. I'll do my best to answer your questions.

Last edited by dlazarus6660; Oct 26, 2010 at 07:10 PM.
Oct 30, 2010, 11:40 PM
Registered User
Very nice dlazarus6660! Thanks for the video and plans!!!
Feb 08, 2011, 07:04 PM
If it flies, I crash it!
dlazarus6660's Avatar


The MIG-25 now has decals. I placed them last week. It brings it to life.
Sep 20, 2011, 11:11 PM
If it flies, I crash it!
dlazarus6660's Avatar

New Flights!

I wanted to find out if the MIG-25 would fly on a 'C' motor. So,a few months back I flew it on a 'C' motor and to my surprise it flew well on a 'C' motor. I did not get any video of the flight but it flew great! Better than I expected.
I flew it again in Maine and I got video but I was holding the camera in the wrong positon. Oh weller!

MIG-25 Rocket (0 min 22 sec)
Last edited by dlazarus6660; Sep 21, 2011 at 08:32 PM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log MiG-25 "Foxbat" Park Jet beanie Pusher Prop Jet Models 418 May 29, 2015 01:51 PM
New Product MIG-25 Foxbat flyRCfoamies Pusher Prop Jet Models 19 Sep 03, 2013 06:54 PM
Video MiG-25 "Foxbat" Park Jet Maiden Flight Video beanie Electric Plane Talk 7 Apr 30, 2006 02:50 PM
Jet Design Contest-Mig 25 Foxbat Frenche Electric Ducted Fan Jet Talk 8 Dec 06, 2004 12:44 PM