Skywing Monster - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 29, 2010, 12:41 AM
Registered User

Skywing Monster

Look what the cat dragged into my house this morning!
Sign up now
to remove ads between posts
May 29, 2010, 12:46 AM
3D Crazy
Meez's Avatar
wait for your flight report.................what is the material?
May 29, 2010, 01:22 AM
Registered User
Originally Posted by Meez
wait for your flight report.................what is the material?

The fuse in made of 5mm and solid block EPP(behind the firewall)..close inspection reveals 2 flat CF with one placed at the centre of the fuse and another one at the bottom of the fuse all the way to the tail.
The ailerons and tail fins are made of 3 layers of EPP stacked together..The EPP is of better density compare to Techone.
The fuse is quite stiff so tail twists should be minimum.(i hope)
This one should be a fast build but i still have to wait for the arrival of my MG servos.
Last edited by FlyingMcCoy; May 29, 2010 at 01:55 AM.
May 29, 2010, 02:05 AM
Ride Blue
jholen's Avatar
Nice - looking forward to your build!
May 29, 2010, 02:47 AM
How many planes is too many?
groovejet's Avatar
It looks good. I just came home from a couple of hours at the park with a few planes including my Skywing Tough and my Skywing Katana. I really like my smaller Skywing planes and I look forward to hearing your thoughts on this larger Skywing plane.
May 29, 2010, 03:56 AM
WickedFunRC's Avatar
i've been on the fence on ordering one of these..
Latest blog entry: Latest Video's
May 29, 2010, 08:27 PM
EP 3D Flyer
feda's Avatar
Originally Posted by FlyingMcCoy
Look what the cat dragged into my house this morning!
Thanks for photos, FlyingMcCoy.

I cannot watch your youtube videos. When I click on your Souka video, I would get a message saying "this is a private video." Do I need any permission to watch your youtube videos?

May 31, 2010, 01:51 AM
Registered User
Thanks are the electronics that i intent to use on my Monster.

2818/900 Torque motor and 35 amps ESC.
D933MG 12g 2.0kg servos x 4
2200mah 3s Emax li-po.

I should be able to put everything together in one evening because all the work has been done for by the factory including hingers, control horns and servo mounts installation. Airframe minus the all the electronics weights in at 600g.. Another thing i have to mention- the instruction manual is just 2 pcs of paper in Chinese and not a word about where the CG is. But i'm sure those with experience in building planes can do away the manual anyway. If you're a beginner you wouldn't have bought this plane in the first place would you?
HK..where are my servos??

Feda..the problems with the videos has been should be able to watch it now.
May 31, 2010, 07:25 AM
How many planes is too many?
groovejet's Avatar
Thanks for posting this info FlyingMcCoy. It's good to know that the larger Skywing planes are also virtually pre-assembled at the factory like the smaller ones.
Jun 01, 2010, 12:15 AM
Registered User
Finally my servos have arrived from HK..hope i'm able to put everything together in time for maiden this coming weekend.

Jun 01, 2010, 04:26 AM
How many planes is too many?
groovejet's Avatar
Keep it coming!
Jun 01, 2010, 08:20 PM
Ride Blue
jholen's Avatar
Yes, more pictures. Video is better!
Jun 02, 2010, 05:13 PM
Old Skool
J.Douglas's Avatar
I received my Monster from feda it also has carbon in the tail and ailerons.
Very nice. I will start by fixing the main wings to the fuse.
The main wing is in two pieces and needs to be lined up with each other.
I test fit everything first.
Last edited by J.Douglas; Jun 02, 2010 at 05:44 PM.
Jun 02, 2010, 06:56 PM
Old Skool
J.Douglas's Avatar
As I wait for the glue to set up on the wings I started to mount the tail servos and pull wires. There are openings above the mounts for the wires.
Jun 02, 2010, 07:46 PM
Old Skool
J.Douglas's Avatar
FlyingMcCoy, I hope you dont mind me posting my build here I hope we can help each other out .

I wanted to beef up the wing mount some. I have this foam cutter and maid the holes for the wing joiner bigger so I could pack some glue in around the tube. This could be done as the wing are put together.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Skywing Sbach 342 feda 3D Foamies 270 Jun 19, 2013 01:07 PM
New Product Skywing's new design for their big YAK54 feda 3D Foamies 260 Jun 05, 2012 12:38 AM
New Product Skywing "Tough" EPP 3D ARF groovejet 3D Foamies 266 Nov 23, 2011 12:06 PM
New Product Skywing Katana EPP 3D ARF groovejet 3D Foamies 55 Jun 01, 2010 02:48 AM
Sold Skywing 200A ESC NIB setxws6 Aircraft - Electric - Power Systems (FS/W) 2 Dec 17, 2009 11:41 AM