Giant Scale RV-3 Plastic Tips for Wing, Stab, Fin - RC Groups
Thread Tools
This thread is privately moderated by Jeff Worsham, who may elect to delete unwanted replies.
May 02, 2010, 09:03 PM
Trader Rating: 149
Trying to stay out of Trouble!
Jeff Worsham's Avatar

Giant Scale RV-3 Plastic Tips for Wing, Stab, Fin

Somehow these tips were extra from the RV-3 my dad had in 80's. Was a 96" span ARF made by Lance Machining in Utah. Might be made of Lexan, blue color is applied inside, and they are very light- 3.3oz total for all 5 pieces. Stab tips have some white overspray on inside, can't be seen from outside.

Wing tips- 19" chord, 2 3/4" thick
Stab tips- 8" chord, 1" thick
Fin tip- 8 1/2" chord, 1" thick

Flexability will allow them to fit applications varying in thickness at least +/- 10 percent of thickness measurements above.

Photos of the actual plane are for reference only, it's been long gone for years.

$18 which includes shipping via USPS Mail to Con US address. Paypal or Postal MO from US buyer, Paypal only from International buyer.
Thanks for your interest,
Last edited by Jeff Worsham; Dec 04, 2013 at 10:24 PM.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted GP RV-4 40 size wing tips Broken wing 31 Aircraft - Fuel - Airplanes (FS/W) 2 Apr 05, 2010 05:04 AM
Discussion Mike McConville tips for Giant Scale tmenet Giant Scale Airplanes 0 Mar 10, 2010 06:16 PM
Wanted WING Bags for Greatplanes RV-4 1/4 scale and Hanger 9 Pulse. FlattyFlier Aircraft - General - Miscellaneous (FS/W) 2 Mar 23, 2009 02:08 PM
Tips for glueing/aligning stab and fin onto fuselage? arukum17 The Builders Workshop 1 Oct 20, 2005 07:54 AM