Shop our Airplanes Products Drone Products Sales
Thread Tools
May 02, 2010, 09:11 AM
Registered User

eLogger v3 - no LED light

Hi, I have a eLoggerv3. Recently I updated its firmware from 8.13 to 8.31, now I can no longer acces it and the LED light does not come on. Have done all the troubleshooting stuff ie used diffferent USB port, unplugged all other USB devices, used a different computer. Any other ideas out there!
Sign up now
to remove ads between posts
May 06, 2010, 01:34 AM
billpa's Avatar
Roystor, sorry you are having an issue with the eLogger. If you connect a battery to the eLogger, does the LED blink? If so, I think your USB cable may have broken. If the LED is off even with a battery, I think the eLogger may have failed. If so, we will need to check it in-house. This process is started by opening a support ticket at We'll reply to the ticket instructions for returning the unit to us.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Blade mSR help no blue LED light Billv2 Micro Helis 4 Oct 26, 2009 10:11 AM
Help! No RPM Reading on new Elogger V3 lilredrex Eagle Tree Systems 3 Apr 30, 2009 01:08 PM
Help! Dead eLogger V3 ??? (led constat on) lavi Eagle Tree Systems 2 Dec 30, 2008 01:36 PM