Mibo E-Osa/Axis/E-Wasp - Page 50 - RC Groups
Thread Tools
Sep 05, 2012, 02:15 PM
In search of RC nirvana
fishboy77's Avatar
Quote:
Originally Posted by GryphonRCU
The attached graph is for the E rotor option which drops the KV by roughly 5% (for each prop: Expect more RPMs and AMPs and Watts if you use regular rotor).
I used 5S-3000 40C
Short duration static testing.

Stay away from high end of this chart pending any application's low airflow to motor, throttle use etc.

If you need the APC Carbon 4.75X4.75 tested let me know and give me some time.


Gryphon
Thanks for the graph, Gryphon. That's very helpful. No need to test the 4.75x4.75. Based on the graph I imagine it would be around 95 amps, depending on the pack of course.
Last edited by fishboy77; Sep 06, 2012 at 06:28 PM.
Sign up now
to remove ads between posts
Sep 05, 2012, 02:16 PM
In search of RC nirvana
fishboy77's Avatar
Quote:
Originally Posted by mazon
Thanks fishboy.

As a first mouldie, with their specced 350-400watts of power, it should be plenty of fun. The overpowering stuff can come later once familar with the plane.
Cool. If you get it be sure to report your results here!
Sep 05, 2012, 09:53 PM
Registered User
quick question,
I am looking for a decent spinner to put on my apc propped het 2w-25
thanks,

L
Sep 06, 2012, 11:59 AM
In search of RC nirvana
fishboy77's Avatar
Quote:
Originally Posted by lennyk
quick question,
I am looking for a decent spinner to put on my apc propped het 2w-25
Some of us are using this one: http://www.leaderhobby.com/product.asp?ID=9394001224501

Quality is decent. I had to rough up the backplate quite a bit to get it to bite into the prop in order to be able to tighten the nut.

Here's a much nicer one if you are feeling spendy: http://www.electricwingman.com/spinn.../aeronaut.aspx

The manual suggests a 35 mm spinner but mine (the Leader Hobby one) is a tad bit too small. I think that 36 mm would be perfect.
Sep 06, 2012, 02:55 PM
"RC ADDICT" in Toronto!
wollins's Avatar
Have any of you guys made an exit cooling hole for your Wasp?

Colin
Sep 06, 2012, 03:29 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by wollins
Have any of you guys made an exit cooling hole for your Wasp?

Colin
There's already a big one at the back...
I made an extra opening under the wing to get more air in directly to the ESC. As long as you don't clog the fuselage totally the hot air will escape from the opening at the very end.
Sep 06, 2012, 04:21 PM
What is Highspeed ?
Rolf D.'s Avatar
Quote:
Originally Posted by wollins
Have any of you guys made an exit cooling hole for your Wasp?
Colin
I made some little holes in the canopy for more air to the esc.
and at the end of the wing a bigger one as outlet.
when you fly with 4S there is not a lot of room for aircondition so the heat will stay inside.
greez
Rolf
Sep 08, 2012, 05:51 PM
Registered User
FlyLT's Avatar
Today's fun with new camera on board

Mini Hawk with keychain #16 V2_D lens (3 min 26 sec)
Sep 08, 2012, 06:46 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Awesome, LT! Congrats with your #16 v2 D-lens. This thing rocks
Sep 08, 2012, 07:08 PM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by FlyLT
Today's fun with new camera on board

http://www.youtube.com/watch?v=e-hdo3E0TkA&hd=1
Flipping amazing how nice that vid came out ! Now if you could so kind as to give me the Title and Artist of the song you used in that vid
Sep 08, 2012, 08:10 PM
Registered User
FlyLT's Avatar
Thanks,guys .
The song is : Yogi Ft. Ayah Marar - Follow You (Xilent Dubstep Remix)
Sep 08, 2012, 09:46 PM
In search of RC nirvana
fishboy77's Avatar
Very nice video LT! Good choice on the music too.
Sep 08, 2012, 11:17 PM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by FlyLT
Thanks,guys .
The song is : Yogi Ft. Ayah Marar - Follow You (Xilent Dubstep Remix)
Stressing my home system with it right now .....NICE !
Sep 09, 2012, 04:50 AM
RC Farmer
Farmer_Joe's Avatar
FlyLT - Great video, i relay need this wide lens #16.
Sep 09, 2012, 07:58 AM
Registered User
FlyLT's Avatar
Quote:
Originally Posted by VooDoo Child
Stressing my home system with it right now .....NICE !

haha, me too


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Will Wasp V4/Belt 250 parts fit on Wasp V3? cfanto Skyartec 8 Mar 24, 2010 05:02 PM
Wanted Spirit E by mibo FASTBEN Aircraft - Sailplanes (FS/W) 3 Dec 07, 2009 02:36 AM
anybody know Mibo Modeli "spirit e"??? trashmanf High Performance 3 Jul 23, 2005 09:33 PM
Mibo Modeli Spirit e 207 Electric Sailplanes 15 Jul 23, 2005 08:26 AM
Any info about Mibo Spirit E? AndrésMtnez High Performance 27 Jun 20, 2005 10:21 AM