Stacks for the Relaxed - Part Deux without the tude - Page 17 - RC Groups
Thread Tools
This thread is privately moderated by wedgewing, who may elect to delete unwanted replies.
May 05, 2010, 09:42 PM
nov
nov
Garage sale junkie
nov's Avatar
well let's get on that Nick. If it is too windy to fly, get a design together. Anyone have any ideas? I think the word "mixes" needs to be in there somewhere.
May 05, 2010, 09:49 PM
Ready, Post, Aim
wedgewing's Avatar
Quote:
Originally Posted by twister782
I will need to use No y connector in the future , If i want to add a KE mix. Correct?
For the AR6100/6110 the right wing goes into AILE and left wing goes into AUX1. Wing needs to be selected as Flaperon, with No V-Tail


For AR500 I don't know if it matters. I just plug the Right into the AILE at the bottom and Left into AiLE at the top

If you want to use independent aileron operation like the AR6100/6110 there is a "mix" I can provide that would use an AILE > Gear to make it work

You can do KE mixing with a Y harness set up too no worries
May 05, 2010, 09:59 PM
Registered User
twister782's Avatar
Quote:
Originally Posted by wedgewing
For the AR6100/6110 the right wing goes into AILE and left wing goes into AUX1. Wing needs to be selected as Flaperon, with No V-Tail


For AR500 I don't know if it matters. I just plug the Right into the AILE at the bottom and Left into AiLE at the top

If you want to use independent aileron operation like the AR6100/6110 there is a "mix" I can provide that would use an AILE > Gear to make it work

You can do KE mixing with a Y harness set up too no worries
Good deal? now i can sleep tonight. when stuck in traffic my mind started wandering. more than the normal wandering.
May 06, 2010, 09:53 PM
Ready, Post, Aim
wedgewing's Avatar
wow, I thought it was Arron that never visits anymore... no one has been here... oh well I am going to buzz around on G5

Stacks pw: brownale

EDIT: looks like G5 Multiplayer is screwed right now.....

back to the brown ale
Last edited by wedgewing; May 06, 2010 at 10:08 PM.
May 06, 2010, 10:17 PM
nov
nov
Garage sale junkie
nov's Avatar
come on wedge open a room! I am ready.
May 06, 2010, 10:25 PM
Registered User
twister782's Avatar
I opened a room
Barc PW= dunkle
May 06, 2010, 10:44 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
This thread does seem to be quiet lately. I have a 6 week old, what your excuses!
May 06, 2010, 10:56 PM
nov
nov
Garage sale junkie
nov's Avatar
well slow is better than hearing more about Bob's nip clamp
May 06, 2010, 11:58 PM
Registered User
twister782's Avatar
we went flying
then I had to take wife to store (still don't remember that I said I would take her when I got home)didn't get home till 9:45. I don't think she understood when I said I had some Slick repairs to do. Dumb me. decided to put a different battery in slick because it was a little breezy. I went with a 2200 for the weight. I was off on CG. brought it around to adjust CG and flattened my twice fixed gear. Now I put that taller gear on,I bought in Toledo.
Sure makes the plane look bigger. I also put my pants back on. sure looks close in the back.
May 07, 2010, 06:52 AM
nov
nov
Garage sale junkie
nov's Avatar
If you also put new gear on you would look taller too
May 07, 2010, 07:20 AM
Registered User
twister782's Avatar
In Bed?
May 07, 2010, 07:22 AM
Ready, Post, Aim
wedgewing's Avatar
Yep, based on the pictures, sure looks like you will be doing tail drags just landing :-)

Any way to bend that tail wheel down a bit? Worst case take a zip-tie and clip off the locking end. Hot glue the remaining strip to the bottom of the rudder for some scuff protection

I know Dave would also recommend gluing a zip-tie to your backside to keep you from dragging arse, but a good cup of coffee can take care of that
May 07, 2010, 07:24 AM
Registered User
twister782's Avatar
Quote:
Originally Posted by wedgewing
Yep, based on the pictures, sure looks like you will be doing tail drags just landing :-)

Any way to bend that tail wheel down a bit? Worst case take a zip-tie and clip off the locking end. Hot glue the remaining strip to the bottom of the rudder for some scuff protection

I know Dave would also recommend gluing a zip-tie to your backside to keep you from dragging arse, but a good cup of coffee can take care of that
mmmmmmm protection
May 07, 2010, 07:26 AM
Registered User
twister782's Avatar
Quote:
Originally Posted by wedgewing
Yep, based on the pictures, sure looks like you will be doing tail drags just landing :-)

Any way to bend that tail wheel down a bit? Worst case take a zip-tie and clip off the locking end. Hot glue the remaining strip to the bottom of the rudder for some scuff protection

I know Dave would also recommend gluing a zip-tie to your backside to keep you from dragging arse, but a good cup of coffee can take care of that
landings? i drag the tail on every take off. I gotta fix that!
May 07, 2010, 07:29 AM
Registered User
twister782's Avatar
nov came up with a new trick name last night. Just can't remember what it is called. it was funny.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Cleveland Metroparks Part Deux Carnifax North Coast Electric Flyers 35 Apr 26, 2010 09:23 AM
Discussion Airco DH-2 Part deux D Johnson Scratchbuilt Indoor and Micro Models 13 Apr 07, 2010 05:50 PM
Discussion The Pounding Part Deux...Free Speech beats Statism MtnGoat Life, The Universe, and Politics 9 Jan 21, 2010 08:59 PM
Discussion Beta Detail - dmgoedde part deux CrashingDutchman UAV - Unmanned Aerial Vehicles 60 Sep 10, 2009 03:53 AM