Stacks for the Relaxed - Part Deux without the tude - Page 132 - RC Groups
Thread Tools
This thread is privately moderated by wedgewing, who may elect to delete unwanted replies.
Nov 03, 2010, 11:30 AM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by joshet89
not really inverted harrier with the Vyper too much, I have too much fun drawing lines with it. So its in a 3/4 throttle inverted line.....thats when I see the yaw. I can string out a slow roll the length of the field and not see the yaw in the inverted section of my slow roll. I'm still thinking its probably my limited inverted ablities, but I want to make sure there isn't a set up issue that I could be missing.
well, if we can cross paths at the stacks-on, I'm happy to help trim planes.
Nov 03, 2010, 12:02 PM
Ready, Post, Aim
wedgewing's Avatar
Thanks.... I will want you to check out the new set up as it should just about mirror yours with the new sexy servos :-)
Nov 03, 2010, 02:45 PM
MD1 HACK
joshet89's Avatar
hoping to make it down saturday afternoon, any words of wisdom will greatly appreciated
Nov 03, 2010, 06:51 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
ugh G5 wont activate now. Customer service is putting me on hold for eternity. Maybe I should just fly for real
Nov 04, 2010, 06:06 PM
Registered User
twister782's Avatar
Quote:
Originally Posted by theKM
well, if we can cross paths at the stacks-on, I'm happy to help trim planes.
Arron is the MAN. i can hardly trim my foamy and he will be able to trim a mode 1.
Nov 04, 2010, 06:09 PM
Registered User
twister782's Avatar
wow! also I am glad all the gay talk calmed down. I had to grab the wife and squeeze her boob to see if I was still headed the right direction. All is fine
Nov 04, 2010, 07:05 PM
Ready, Post, Aim
wedgewing's Avatar
What did Dave's wife say when you did that ......

Quote:
Originally Posted by twister782
wow! also I am glad all the gay talk calmed down. I had to grab the wife and squeeze her boob to see if I was still headed the right direction. All is fine


Sent from my DROIDX using Tapatalk
Nov 04, 2010, 08:23 PM
Ready, Post, Aim
wedgewing's Avatar
All work and no play in vegas makes keith a dull flyer .......

Big screen flying is nice on the freestyle........ I just wish I didnt hate the song so much now :-)



Sent from my DROIDX using Tapatalk
Nov 04, 2010, 09:17 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
I finally have a functioning real flight! I am flying tomorrow at work all day.
Nov 04, 2010, 11:19 PM
MD1 HACK
joshet89's Avatar
So as I was looking at my vyper tonight I noticed as I would hold it inverted the elevator extension would fall onto the pull cable. I can't imagine that would cause my yaw issue inverted but stranger things have happened??? Well I secured it so its not flopping around (shoulda done that from the start) to see if that's gonna help. Looks like Sunday should be a good day to do some flying. Looks like I will be able to get out of work early on Saturday for stacks on so I'm excited to meet everyone that is planning on coming down. I went into hobbytown today in strongsville and I don't know if any of you guys have been in there recently but it really seemed like there stock on stuff was low! Its either the things I'm looking for never seem to be there or in the last six months there has been a drop in stuff they are carrying. Really hope they aren't closing or anything for nothing else but the convienence.
Nov 04, 2010, 11:54 PM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by joshet89
So as I was looking at my vyper tonight I noticed as I would hold it inverted the elevator extension would fall onto the pull cable. I can't imagine that would cause my yaw issue inverted but stranger things have happened??? Well I secured it so its not flopping around (shoulda done that from the start) to see if that's gonna help. Looks like Sunday should be a good day to do some flying. Looks like I will be able to get out of work early on Saturday for stacks on so I'm excited to meet everyone that is planning on coming down. I went into hobbytown today in strongsville and I don't know if any of you guys have been in there recently but it really seemed like there stock on stuff was low! Its either the things I'm looking for never seem to be there or in the last six months there has been a drop in stuff they are carrying. Really hope they aren't closing or anything for nothing else but the convienence.
you wont find any difference in your rudder, but it keeps the inner voices happy with respect to cable/wire safety

saturday at stacks-on will be great fun, quite looking forward to it.
Nov 05, 2010, 12:16 AM
Ready, Post, Aim
wedgewing's Avatar
Great point Josh

I know the guys at HT ...Steve the owner seemed pretty occupied .... Mike said it had been very slow. They had already reduced the size of the place last year because the landlord raised rent.

They are a good place and knowledgeable group. Like you I think it is odd there is no pre holiday stock up. There is a little hobby place in North Royalton that stocks nothing so if they make me order stuff I can just order from the web

That has to kill them

Sent from my DROIDX using Tapatalk
Nov 05, 2010, 12:24 AM
Ready, Post, Aim
wedgewing's Avatar
I am planning on flying this weekend. I will let you know. Most likely Sunday

Sent from my DROIDX using Tapatalk
Nov 05, 2010, 12:30 AM
Just "hanging" Around
3D-Dabbler's Avatar
Quote:
Originally Posted by twister782
wow! also I am glad all the gay talk calmed down. I had to grab the wife and squeeze her boob to see if I was still headed the right direction. All is fine
LOL Excellent! I am glad everything is working like it should
Nov 05, 2010, 12:45 AM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by twister782
wow! also I am glad all the gay talk calmed down. I had to grab the wife and squeeze her boob to see if I was still headed the right direction. All is fine
lol


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Cleveland Metroparks Part Deux Carnifax North Coast Electric Flyers 35 Apr 26, 2010 09:23 AM
Discussion Airco DH-2 Part deux D Johnson Scratchbuilt Indoor and Micro Models 13 Apr 07, 2010 05:50 PM
Discussion The Pounding Part Deux...Free Speech beats Statism MtnGoat Life, The Universe, and Politics 9 Jan 21, 2010 08:59 PM
Discussion Beta Detail - dmgoedde part deux CrashingDutchman UAV - Unmanned Aerial Vehicles 60 Sep 10, 2009 03:53 AM