Logger not reading correctly? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Apr 22, 2010, 06:34 AM
Registered User

Logger not reading correctly?

Hi, I have an ET v3 100A on my Logo600 with a Scorpion 4035-560kv motor and Kontronik Jive 80A HV esc running 10s 4500mah 30C lipoi packs.

The voltage readout is wrong. There should be somewhere around the 42v for a start then back down some.

Please take a look at my graph and tell me what is going. I have graphs with 2 seperate batteries but net the same sort of results. I tried a re-zero between the batteriers and still the same results. I have not done a factory reset and did not upgrade the software. I had updated to 5.69 prior to any flights. I have also noticed the temp sensors in which I am running the two types are not reading correctly either.
Sign up now
to remove ads between posts
Apr 24, 2010, 06:37 PM
billpa's Avatar
beans, sorry to hear about this problem. I would recommend the following steps:

1) perform the factory reset.
2) optionally, upgrade to our latest software (8.45 or later) from our website. Though this is labeled as beta software, we are about to move this version to "release". I do not see any fixes we've done in the change log that would address what you are reporting, however.
3) If step 1 and optionally step 2 don't resolve your issue, please open a web ticket with us at http://ticket.eagletreesystems.com, and provide a link to this thread. We will then collect some additional info from your logger.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Bug My RCGroups link not working correctly wrightme Site Suggestions / Complaints 3 Oct 28, 2009 05:15 PM
Discussion Forum link not working correctly..... mrbonk Slope 4 Oct 22, 2009 07:32 AM
Discussion ADH50L motor not running correctly - (w/ fix and info) CQE Flash Micro Helis 29 Oct 08, 2009 06:43 PM
Discussion E-logger V2 second temp probe not reading ? PLMS Eagle Tree Systems 4 Aug 22, 2008 06:34 PM