efflux RC/Air Sally....F-20, 70mm ALL COMPOSITE w/custom ducts - Page 82 - RC Groups
Thread Tools
Oct 01, 2012, 06:47 PM
Lipo abuser ... smoke on!
gp125racer's Avatar
Are those EZ-Links I see on there??
Latest blog entry: D100
Sign up now
to remove ads between posts
Oct 01, 2012, 06:57 PM
efflux RC's Avatar
Quote:
Originally Posted by AceMigKiller
...You're using a crummy "Orange RX"???
Welllll, I was saving the JR921X for something bigger.

I have the 9ch orange in a Habu 32 and a L-39 with no problems. I'm running 2 satellites with it.
Now you jinxed me Vic. (or saved me ) Maybe I'll switch it out.
Latest blog entry: Updated blog - Oct 2017
Oct 01, 2012, 06:59 PM
efflux RC's Avatar
Quote:
Originally Posted by gp125racer
Are those EZ-Links I see on there??
I usually make up my own hdwr with Dubro kwik links, but I used the stock SAPAC hdwr to save time.
Latest blog entry: Updated blog - Oct 2017
Oct 01, 2012, 07:19 PM
deltas are cool
AIR SALLY's Avatar
Got the F-20's missle rails made today ,and primed ...maybe get some smoke generator....or missle made tonight .the smoke generators were used for airshow work at paris and england ... i think i remember seeing it fly at el toro with smoke on the wing tips. flew the whole show in a 1/4 mile box and then left the area out the top of the TCA ...pretty cool stuff back then .
Oct 01, 2012, 08:12 PM
efflux RC's Avatar
Glad ya did the rails.



I won't hog more of the F-20 thread with Viperjet playfulness. So I moved it to here.
https://www.rcgroups.com/forums/show...7#post22887361



Oh hey...The shipment of F-20 / Viperjet struts came in today. They will be put back on the wesite later today.
Latest blog entry: Updated blog - Oct 2017
Oct 01, 2012, 08:59 PM
deltas are cool
AIR SALLY's Avatar
did you get the electric retracts too?
Oct 01, 2012, 10:08 PM
efflux RC's Avatar
No, they are coming seperately.
Latest blog entry: Updated blog - Oct 2017
Oct 02, 2012, 03:47 AM
deltas are cool
AIR SALLY's Avatar
servo wires and RX go in tomarrow,i got all the paint touched up .and painted the mis rails and inlet plates. slowing getting there ,i need a tail pipe and silicon in the ducts and then drop the fan ,i need a lower hatch and main wheel strut doors,i just might make it.
Oct 02, 2012, 02:08 PM
efflux RC's Avatar
Wow, you have a few parts to make yet. Stick with this one (if you can) so we can have the most complete (as possible) F-20 flying for the debut demo in Vegas.
I can make the trust tube (rolled up and complete) and ship it if you want.
Latest blog entry: Updated blog - Oct 2017
Oct 02, 2012, 03:00 PM
deltas are cool
AIR SALLY's Avatar
i had a big set back today ,the map nose gear that was in the first F-20 is not working too good it barley lifts the nose at 100 pst and must be leaking a bit too ,so i need a Sapac nose retract,some body on here had a set ? pm me or Gary do you have any ?would hate to fly vegas with gear down
Gary i can make a thrust tube in 20 mins so thanks anyway .i got all the servo wires in and hooked up .
im sure the nose retract got damaged in the prototype's crash
................HELP
Oct 02, 2012, 03:27 PM
deltas are cool
AIR SALLY's Avatar
ok ok take a deep breath .......................ok im ok now ...i found a hose leaking at the mains ...so i think im good now at 110 psi the nose went up sheesh im stressing i'll work it some more tonight ,gotta go to work right now.
Oct 02, 2012, 07:55 PM
efflux RC's Avatar
Glad you got it fixed.
Latest blog entry: Updated blog - Oct 2017
Oct 02, 2012, 09:49 PM
deltas are cool
AIR SALLY's Avatar
it is still not as positive as i would like it to be for a frwd retacting nose gear,with 40 to 50 mph wind against it ..C/N may have to roll it on take off to get the gear up NOT. it is a map nose gear and the air cly on the sapacs is a tad bigger and has a bit more lifting strength.got some nose cones made for the smoke generators,just need to do a bit of body work and paint them. i gotta get this fan installed and running and see what we have .
Oct 03, 2012, 05:05 AM
deltas are cool
AIR SALLY's Avatar
tail pipe made fan in duct in .....dont like where the esc ended up ,but how much cooling do they really get ? air should come in through the nose gear door opening ,the esc is between the ducts,there might be enough leaks around the ducts to draw some air .
Oct 03, 2012, 06:17 AM
Never fly an A model anything!
jayb1rdz's Avatar
Gun holes??


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Air Sally T45 (v1) F/G ducts $48.00 jzuniga Aircraft - Electric - Jets (FS/W) 0 Jan 01, 2010 02:36 PM
Sold NIB Sapac T-45 V1 Composit with Air Sally ducts mickydee Aircraft - Electric - Jets (FS/W) 7 Dec 11, 2009 06:57 PM
Sold Phase 3 F-16 w/ Air Sally fiberglass NIB mflander Aircraft - Electric - Jets (FS/W) 6 Nov 27, 2009 03:21 PM
Wanted Air Sally Ducts for BAe Hawk jzuniga Aircraft - Electric - Jets (FS/W) 0 Oct 23, 2009 09:05 PM
Sold E-flite BAE Hawk and Air Sally Ducts bfischer Aircraft - Electric - Jets (FS/W) 3 Jul 25, 2009 04:39 PM