New Products Flash Sale
Thread Tools
Old Dec 25, 2010, 08:51 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
more to come. so when you get the wings in stall the spar in one wing with some epoxy on the end and in the holes where the spar fits. push spar in till it just touches the front balsa spar that is a stock spar allready installed,dont force it .Gorilla glue on the end would be better and a drop of water it will foam up and make a good bond to the balsa.once that is cured slide the one wing into position with the spar through the fuse slide the other wing on for a fit ck. when you like the fit i would glue the right wing on lined up with the mold line. when that wing is cured install the left wing DONT NOT GLUE the left wing to the MOLD LINE ,do the measure thing to get it straight, the mold line on the left side is off more than .100"
Last edited by AIR SALLY; Dec 25, 2010 at 08:58 PM.
Sign up now
to remove ads between posts
Old Dec 25, 2010, 10:40 PM
jayb1rdz is offline
Find More Posts by jayb1rdz
Never fly an A model anything!
jayb1rdz's Avatar
Thanks guys fpr the progress report. Now I know where that dummy I spat ended up !! J
Old Dec 25, 2010, 11:29 PM
corsair nut is offline
Find More Posts by corsair nut
fly like an EAGLE ;)
corsair nut's Avatar
must be a down under saying...????
Old Dec 25, 2010, 11:59 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
....i have no idea what he is saying
Old Dec 26, 2010, 02:24 AM
jayb1rdz is offline
Find More Posts by jayb1rdz
Never fly an A model anything!
jayb1rdz's Avatar
Not meant to be too confusing C/N. Your son on the right has a pacifier in his mouth, we call it a dummy here... as in spat the dummy...I do this often, ask my wife.

New "tuned' motor in the my car and not able to stretch its legs due to horrible weather. more than 8 months tinkering and having parts machined and no time to play Travelling for work again in the morning. At least I'll have company. J
Old Dec 26, 2010, 10:05 AM
corsair nut is offline
Find More Posts by corsair nut
fly like an EAGLE ;)
corsair nut's Avatar
ahh.....that mostly makes sense now
Old Dec 28, 2010, 11:58 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar

wings and things


Hey J i shipped your goodies to day .
Old Dec 29, 2010, 12:24 AM
efflux RC is offline
Find More Posts by efflux RC
efflux RC's Avatar
...
Site Sponsor
Latest blog entry: Updated blog Oct 2014
Old Dec 29, 2010, 01:44 AM
jayb1rdz is offline
Find More Posts by jayb1rdz
Never fly an A model anything!
jayb1rdz's Avatar
Yippeeeeeee. I expect to have a few jealous buddies where I fly. I hope that translates into sales for you guys. J
Old Dec 29, 2010, 02:34 AM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
follow the pics and instructions ....im having you put the stock bulkhead in front of the spar ...mine is behind it and i had clearance proplems with the wheels. What retracts are you using ? you will have to go back in the thread to see how the center ducts works,how the nose gear mount go in ,and the fan mounting rails ....some of the stock wood parts needs to be used for the batt tray.the bulkhead shown in the latest pics need to be reshaped a bit at the top and you might need to clearance it for the inlet ducts.(glue it in with gorilla glue ,as it has some gaps.the GG foams up to fill the gaps)the center duct is longer than needed ,and fits a HET /wemo fan on one end, and a sapac .or WM400 on the other .you could turn down a SW fan to fit also .the center duct is long and needs to be trimmed..it just depends on where you locate the fan due to motor weight /C/G . im here to help if you need it.
Last edited by AIR SALLY; Dec 29, 2010 at 03:28 AM.
Old Dec 29, 2010, 02:51 AM
ultraflite is offline
Find More Posts by ultraflite
Suspended Account
.
so when will this full kit f-20 be available? 2020?
and what would be the price range? like tamjet $1100 f-5?
Old Dec 29, 2010, 03:06 AM
jayb1rdz is offline
Find More Posts by jayb1rdz
Never fly an A model anything!
jayb1rdz's Avatar
hey A/S, I have a set of SAPAC retracts ready to install. I haven't got the struts yet if I need the VJ ones..... Iam sure I have an extra set for the hawk/L-39

Ultra, I am not sure if your sense of humour is blacker than mine...

FYI, this has been mostly a private project that Gary and Efflux have shared and worked to bring to reality. It is out of their generosity that they will bring this project to market for those enthusiasts that really want a quality F-20 model. I am sure they don't plan to get rich out of it.

If you can't wait or can't afford it..... Try this link

http://www..com.com/hobbyking/store/...dproduct=11248

Ciao J
Old Dec 29, 2010, 03:15 AM
efflux RC is offline
Find More Posts by efflux RC
efflux RC's Avatar
The first parts (rear stabs) came out of the molds about two weeks ahead of schedule. We're hoping the full kits will start becoming available in Feb.
This is a quality, full composite (fuse,wings vertical stab, rear stabs) 70mm airframe, with ailerons and flaps and full flying rear stabs, will be retract ready.
The price will be $379

.........................................
Edit: Make that the month of March.
Site Sponsor
Last edited by efflux RC; Dec 29, 2010 at 11:21 AM. Reason: Revised date to "March"
Old Dec 29, 2010, 03:39 AM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
J you need the VJ struts .
Old Dec 29, 2010, 04:29 AM
jayb1rdz is offline
Find More Posts by jayb1rdz
Never fly an A model anything!
jayb1rdz's Avatar
I'll add them to the next order from Gary. J


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Air Sally T45 (v1) F/G ducts $48.00 jzuniga Aircraft - Electric - Jets (FS/W) 0 Jan 01, 2010 02:36 PM
Sold NIB Sapac T-45 V1 Composit with Air Sally ducts mickydee Aircraft - Electric - Jets (FS/W) 7 Dec 11, 2009 06:57 PM
Sold Phase 3 F-16 w/ Air Sally fiberglass NIB mflander Aircraft - Electric - Jets (FS/W) 6 Nov 27, 2009 03:21 PM
Wanted Air Sally Ducts for BAe Hawk jzuniga Aircraft - Electric - Jets (FS/W) 0 Oct 23, 2009 09:05 PM
Sold E-flite BAE Hawk and Air Sally Ducts bfischer Aircraft - Electric - Jets (FS/W) 3 Jul 25, 2009 04:39 PM