Thread Tools
Old Apr 10, 2012, 02:52 PM
Prof100 is offline
Find More Posts by Prof100
Registered User
Prof100's Avatar
Quote:
Originally Posted by JoshB View Post
If I need to start another thread I can but wanted to ask here first. I'm working on a Sky Surfer from crap hobby, I mean Banana Hobby that a relative got for Christmas. Nothing but problems from this thing and BH is useless. Their warranty isn't worth the paper its written on. Enough ranting... Anyway after replacing the ESC since it burnt up on first start up and BH said discontinued on their ESC, I glued it back together and while putting everything together I realized they didnt send me enough screws or the nuts to mount the control horns on with. My local bolt place don't have anything that small and can't get them. Any ideas on where to get these things or the size so I can look? At this point I wouldn't recommend anything from BH, not even worth the bandwidth to look at their site. They shouldn't be in business. Jmo. Sorry but this is ridiculous.
BH is a work of art. Anyway, below is a link to RTL fasteners which has all the fasteners you need for the hobby:

http://www.rtlfasteners.com/
Sign up now
to remove ads between posts
Old Apr 10, 2012, 03:03 PM
JoshB is offline
Find More Posts by JoshB
Novice in training
JoshB's Avatar
Quote:
Originally Posted by Prof100 View Post
BH is a work of art. Anyway, below is a link to RTL fasteners which has all the fasteners you need for the hobby:

http://www.rtlfasteners.com/
Wow thanks. The first thing I clicked on listed the bolts/screws needed. Not bad prices either. Glad you shared that.
Old Apr 10, 2012, 03:11 PM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
Is this reamer good for props? http://www.hobbyking.com/hobbyking/s...897&aff=608603
Old Apr 10, 2012, 03:39 PM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
Maybe if it had a nice T handle to control the reamer.

If you find one let me know.

The ones on eBay cost like $20 and only have 3 or 4 cutting sizes. I can't find a tapered reamer but I'm sure it would cost more.
Old Apr 10, 2012, 03:53 PM
taz101 is online now
Find More Posts by taz101
Registered User
taz101's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
No, this not a prop reamer, it uses a knife blade which will leave a cone shape. It is more for cutting holes in thin Lexan.
HK don't stock prop reamers. Here is one from TOWER HOBBIES.

LURCH
Old Apr 10, 2012, 04:07 PM
Prof100 is offline
Find More Posts by Prof100
Registered User
Prof100's Avatar
Quote:
Originally Posted by JoshB View Post
Wow thanks. The first thing I clicked on listed the bolts/screws needed. Not bad prices either. Glad you shared that.
Say goodbye to four 4-40 screws for $1.19 at your LHS.
Old Apr 10, 2012, 04:22 PM
JoshB is offline
Find More Posts by JoshB
Novice in training
JoshB's Avatar
Quote:
Originally Posted by Prof100 View Post
Say goodbye to four 4-40 screws for $1.19 at your LHS.
No doubt.
Old Apr 10, 2012, 04:25 PM
road_rascal is offline
Find More Posts by road_rascal
Registered User
Quote:
Originally Posted by Eagle202 View Post
I can't find a tapered reamer but I'm sure it would cost more.
I bought a tapered reamer from Menards (like a Home Depot or Lowe's if you're not familiar) for under $10.
Old Apr 10, 2012, 05:23 PM
Limited flyer is offline
Find More Posts by Limited flyer
Limited flyer
Limited flyer's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
Got this a while back

electrifly prop reamer
See photos below.
purchased at hobby wholsale
Last edited by Limited flyer; Apr 10, 2012 at 05:27 PM. Reason: miss spell on photo #2 /8 to 12 mm
Old Apr 10, 2012, 06:18 PM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
Think I am going to go with RCTimer 2212-2200kv, what's the general opinion?
Old Apr 10, 2012, 07:19 PM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by road_rascal View Post
I bought a tapered reamer from Menards (like a Home Depot or Lowe's if you're not familiar) for under $10.
I checked out the Menards website and your right they do sell them. Unfortunately not in Florida. I tried Home Depot, Lowe's and Ace hardware. Only one had the same tapered reamer for about $21. Which is more expensive then eBay.

I appreciate the lead on who may have them. Thanks
Old Apr 10, 2012, 07:23 PM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by Limited flyer View Post
Got this a while back

electrifly prop reamer
See photos below.
purchased at hobby wholsale
Thanks. I was looking for one that had steps of 4, 5, 6 & 7mm or a tapered one from 3mm to 10mm.

Still looking.

Scratch that. I found an Empire 27770 T-handled taper for $12.83 on Amazon. Add a 6 inch pit bull LCD digital caliper for $12.39 and got them both shipped for free.

Thanks for giving me the idea to check places other that hobby shops.
Last edited by Eagle202; Apr 10, 2012 at 07:38 PM. Reason: updated
Old Apr 10, 2012, 07:38 PM
wilem is offline
Find More Posts by wilem
airplanes r made from aluminum
wilem's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
Think I am going to go with RCTimer 2212-2200kv, what's the general opinion?
i have one using it with a e-flite pro 25 amp sc... the E-flite ESC only has two settings for timing... this one cuts out on mid throttle so its either low or high. the hobby king motor did the exact same thing....i am gonna change the esc. it is a powerful motor..
Old Apr 10, 2012, 07:54 PM
Westwood is offline
Find More Posts by Westwood
Registered User
any one try to convert skysufer or bixler to edf glider ??

just did my radian maybe my bixler next

ParkZone Radian EDF JET 2-3 (6 min 16 sec)


liked it ? more on my channel www.youtube.com/user/9westwood9/
Old Apr 10, 2012, 07:55 PM
ajbaker is offline
Find More Posts by ajbaker
Argue for your limitations
ajbaker's Avatar

Getting screwed (LOL)


Quote:
Originally Posted by Prof100 View Post
BH is a work of art. Anyway, below is a link to RTL fasteners which has all the fasteners you need for the hobby:

http://www.rtlfasteners.com/
Here is another source of small parts->http://www.microfasteners.com/
The prices are about 1/2 of rtlfasteners and twice the inventory (guesstimate). Take a look and let me know what you think. I have been using them for many years. I usually get orders in 3-5 days. He is an old retired fa*t, like us.
AJ


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Cyber Sky Parachute (Sky Surfer) shv2sail Aircraft - Electric - Airplanes (FS/W) 7 Aug 23, 2016 10:41 PM
Discussion Banana Hobby Sky Surfer Problems cavy92 Electric Plane Talk 59 Mar 23, 2016 09:10 PM
Discussion Sky Surfer nickwayne11c Electric Plane Talk 15 Nov 18, 2011 03:36 PM
Question Sky Surfer LiPo mod, help... Freight Dog Power Systems 0 Aug 17, 2006 02:45 PM
Swashplate Assembly with Center Ball; is this the swash with ball mod i want? tekforce Micro Helis 4 Feb 08, 2004 06:28 PM