Thread Tools
Old Oct 11, 2011, 10:00 AM
khaled_abobakr is offline
Find More Posts by khaled_abobakr
There's magic in those wings !
khaled_abobakr's Avatar
Quote:
Originally Posted by nakelp86 View Post
U could just type : readymaderc.com
or try this:
http://www.readymaderc.com/store/ind...a216c0a4e2f024

her how I (and many others) mount the cam.
Regarding vacations LOL, not such big deal I may end up at upstate NY :-) or Vermont.
I just want to get the new plane up for the Fall colors
If not I may just gut out my EZ* and change few things.
Hi Nakelp86..

I can see you'll be using your Bixler for FPV .. I'm in your place .. and will really appreciate tellinng me your overall weight RTF... I'm having some problems keeping the weight down ...

Thanks a lot

Khaled
Last edited by khaled_abobakr; Oct 11, 2011 at 10:16 AM.
Sign up now
to remove ads between posts
Old Oct 11, 2011, 10:14 AM
jrjr is offline
Find More Posts by jrjr
Gravity impaired
jrjr's Avatar
Quote:
Originally Posted by StarHopper44 View Post
A heads up for anyone considering ordering the SS canopy from BananaHobby to replace a lost or damaged one (eg, like for my Bix or a SS V1).

It's just the clear plastic part! Totally useless - it won't even fill the cockpit gap without something to mount it on. And on their Spare Parts page, I don't see anything even suggestive of being the correct 'whole thing'.
This is the picture I see on BH's site for the canopy.....



Looks like just the clear part eh? But you're right, what good is that other than maybe replacing the black one with clear.
Old Oct 11, 2011, 10:31 AM
Ole Joe is offline
Find More Posts by Ole Joe
Registered User
Quote:
Originally Posted by jrjr View Post
This is the picture I see on BH's site for the canopy.....



Looks like just the clear part eh? But you're right, what good is that other than maybe replacing the black one with clear.
Save the clear canopy. If you ever order just a fuselage, you only get the insert, no clear part or pilot. Strange, to say the least.
Last edited by Ole Joe; Oct 11, 2011 at 02:14 PM.
Old Oct 11, 2011, 10:36 AM
erkq is offline
Find More Posts by erkq
Registered User
Quote:
Originally Posted by netsurfr View Post
I'm looking forward to the ailerons which do require a plane to be more actively flown vs. the RET Radian.
I have not flown a Radian but just wanted to comment on this. Ailerons do not require a plane to be more actively flown. When I hand-launch my Bix I don't have to touch the controls 'till it's time to turn. The Bix is basically just a SS clone with ailerons added, so it flies like a non-aileron SS until you use the ailerons.
RCG Plus Member
Old Oct 11, 2011, 10:38 AM
healthyfatboy is offline
Find More Posts by healthyfatboy
Registered User
Quote:
Originally Posted by erkq View Post
I have not flown a Radian but just wanted to comment on this. Ailerons do not require a plane to be more actively flown. When I hand-launch my Bix I don't have to touch the controls 'till it's time to turn. The Bix is basically just a SS clone with ailerons added, so it flies like a non-aileron SS until you use the ailerons.
Uh, the SS (if you mean Sky Surfer) also has ailerons. If you mean Slow Stick, then you are correct, but the Bixler isn't a clone of the Slow Stick!
Old Oct 11, 2011, 11:01 AM
erkq is offline
Find More Posts by erkq
Registered User
Quote:
Originally Posted by healthyfatboy View Post
Uh, the SS (if you mean Sky Surfer) also has ailerons. If you mean Slow Stick, then you are correct, but the Bixler isn't a clone of the Slow Stick!
Oh... I didn't know that about the SS. Sorry. But the stability from hand-launch still applies.
RCG Plus Member
Old Oct 11, 2011, 11:17 AM
Flypoppa is online now
Find More Posts by Flypoppa
Me a long time ago
Flypoppa's Avatar
Quote:
Originally Posted by StarHopper44 View Post
A heads up for anyone considering ordering the SS canopy from BananaHobby to replace a lost or damaged one (eg, like for my Bix or a SS V1).

It's just the clear plastic part! Totally useless - it won't even fill the cockpit gap without something to mount it on. And on their Spare Parts page, I don't see anything even suggestive of being the correct 'whole thing'.
I don't know why you or anyone else cannot make a new canopy from Bluecore or depron. I have made a few for different applications. Mainly for camera mounts.
Old Oct 11, 2011, 11:56 AM
StarHopper44 is offline
Find More Posts by StarHopper44
Earthbound Skyhound
StarHopper44's Avatar
Quote:
Originally Posted by Flypoppa View Post
I don't know why you or anyone else cannot make a new canopy from Bluecore or depron. I have made a few for different applications. Mainly for camera mounts.
My Bix canopy (the black one like the SS V1) came with a 3" scratch just below the top. I thought by ordering the SS canopy -- it looked like a solid white piece in their pic; couldn't really tell much about it but never dreamed it was only the clear part, and after all when we talk "canopy" it's the whole, cockpit-filling, one piece 'thing'....so why's the SS's any different? Anyway I thought I'd get a complete (w/pilot figure) V2 canopy assembly for a drop-on replacement, enabling me to carve a slot into my scratched Bix canopy to hold my Vado HD Flip-Cam for some quality aerial shooting.

Too, why would they have only the clear canopy for sale, and not the rest of the assembly or, pilot figure & magnetic base part? It's a valid "spare part", no? Doesn't make sense to only be able to replace just one part of it.
I'm planning on calling their support line when they open....see what gives.


PS: While I'm posting....yesterday's video of the planned lesson flight didn't come off well. My hardhat-cam needs adjusting; more to the right & leaned back more so, not much to show so far. Yesterday was just the first trial run anyway, so no biggy. We had to abort due to very high winds aloft. I started one turn to align with runway, banked 'er over & pulled up but it just kept going, wouldn't turn! Finally recovered after it came down a bit but Sensei had decided no flying today & took over. It wasn't any light breeze on the deck either - took even HIM 4 tries to get 'er down near to us. We had 2 other gassers crash theirs, & another small electro 3d'r that's normally a 'ball of fur' could only fly backwards *LOL*. Good thing the club was havin' a cookout - only thing that kept me at the field!
RCG Plus Member
Old Oct 11, 2011, 12:00 PM
CARS II is offline
Find More Posts by CARS II
Go fly a jet today
CARS II's Avatar
Quote:
Curious... any of you flown a Radian or Radian Pro along w/ the SS/Bix & if so how do they compare in floatiness/thermaling? I am hoping the Bixler floats similar to the Radian & it's as relaxed to fly.
Netsufr, the SS/Bixler is what your looking for, it slows down enough like the Radiant but it is easer to land, I was flying mine at a 1/4 throttle, with the CG over the spar you can get a flat glide.

CARS II
Old Oct 11, 2011, 12:08 PM
CARS II is offline
Find More Posts by CARS II
Go fly a jet today
CARS II's Avatar
Papo60

Yes, on the anchor screws but, I only use the threaded part, with a 2200ma batt. I end up with a CG right over the spar, the added weight is minimun and that's what I had laying around at home.

I may end up with the spoon air intake over the hole to make it look and to get more air in.

Thanks for the tips.

CARS II
Old Oct 11, 2011, 03:31 PM
bradsears is offline
Find More Posts by bradsears
Here because of FPV
bradsears's Avatar
In short I think my horizontal stabilizer is out of alignment with my wings and out of square with the tail. What do I do?

I have a skysurfer v1 that I use for FPV. It has an inclination to bank to the right that I have been battling.

After trying lots of positions for the ailerons / lots of trim settings I have come to notice that the horizontal stabilizer is at a slight angle, higher on the right when looking from the rear of the plane. The rudder seems true.

What should I do? The only thing I can think of is to somehow cut it off, trim some material to make it level and glue it back on. There must be a better idea. Can I bend it with heat?
Old Oct 11, 2011, 03:52 PM
ajbaker is offline
Find More Posts by ajbaker
Argue for your limitations
ajbaker's Avatar
Quote:
Originally Posted by erkq View Post
Oh... I didn't know that about the SS. Sorry. But the stability from hand-launch still applies.
That is why I never use SS on this thread for the Sky Surfer. It causes too much confusion. I always use SkyS as a short name for the Sky Surfer. It makes things clearer.
AJ
Old Oct 11, 2011, 03:54 PM
erkq is offline
Find More Posts by erkq
Registered User
Quote:
Originally Posted by ajbaker View Post
That is why I never use SS on this thread for the Sky Surfer. It causes too much confusion. I always use SkyS as a short name for the Sky Surfer. It makes things clearer.
AJ
Ha! Yeah... I'll do that. I had forgotten there even WAS a Slow Stick!
RCG Plus Member
Old Oct 11, 2011, 03:56 PM
netsurfr is offline
Find More Posts by netsurfr
Registered User
netsurfr's Avatar
Good to hear! I liked the relax flying of the Radian so glad they fly similarly. Also like that the Bixler is smaller so easier to transport.

Quote:
Originally Posted by CARS II View Post
Netsufr, the SS/Bixler is what your looking for, it slows down enough like the Radiant but it is easer to land, I was flying mine at a 1/4 throttle, with the CG over the spar you can get a flat glide.

CARS II
Old Oct 11, 2011, 04:55 PM
SARG5 is offline
Find More Posts by SARG5
SARG5
SARG5's Avatar
Out of line.
What I did on mine was to cut under the hoz. stab. on the LEFT SIDE, enough to let it pull back down to get things level. It worked.
SARG5


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Cyber Sky Parachute (Sky Surfer) shv2sail Aircraft - Electric - Airplanes (FS/W) 7 Aug 23, 2016 10:41 PM
Discussion Banana Hobby Sky Surfer Problems cavy92 Electric Plane Talk 59 Mar 23, 2016 09:10 PM
Discussion Sky Surfer nickwayne11c Electric Plane Talk 15 Nov 18, 2011 03:36 PM
Question Sky Surfer LiPo mod, help... Freight Dog Power Systems 0 Aug 17, 2006 02:45 PM
Swashplate Assembly with Center Ball; is this the swash with ball mod i want? tekforce Micro Helis 4 Feb 08, 2004 06:28 PM