Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 12, 2013, 08:08 PM
Patinthehat is offline
Find More Posts by Patinthehat
Registered User
So im looking to start into this hobby again (had an original hobbyzone firebird back when i was younger) and i noticed the sky surfer v5. It looks like everything i want in a plane, (larger, DURABLE AS ALL HELLx2, 5 channel, easy flying, possible to attach a gopro to, and room for a larger battery for long flights) except i have a few questions.

Is the onboard electronics all one board? or does it have a removeable reciever, esc, etc for possible future planes.

is the tx/rx a piece of junk and therefor not a good idea to get it in a RTF (or not get it at all)?

it a 1300mah battery enough?

I saw the sky surfer pro as well and looks to almost the same plane except slightly larger and better electronics with a larger battery, but its also $80 more, is it worth it?

Ive seen older threads saying that bananahobby is a terrible company and to not deal with them, but all the threads were 5+ years old, have they cleaned up their act at all? or should I not even consider.

here it is;
http://www.bananahobby.com/5-ch-blit...plane-rtf.html
Sign up now
to remove ads between posts
Old Mar 12, 2013, 10:22 PM
Brner is offline
Find More Posts by Brner
AMA16634...Just Me
First off, the link you put up shows this:

[quote}Page Cannot Be Found

We apologize for the inconvenience, but the information or page you have requested is unavailable in this location.

Please use our search feature or try some links listed on the page.[/quote]

Not sure where you're reading but it doesn't take much research to see that, at least IMO, the status quo of BH has not changed significantly in the last few years....

A lottery ticket just might have a much happier outcome......
Old Mar 12, 2013, 11:13 PM
Patinthehat is offline
Find More Posts by Patinthehat
Registered User
ha, alright thats kinda what i needed to hear to solidify my decision. I just dont want to be screwed over right about now. Im looking for a really durable plane that wont be needing to be fixed up alot, especially over product defects.

But here it is again (hopefully it works this time)
http://www.bananahobby.com/5-ch-blit...plane-rtf.html
Old Mar 13, 2013, 05:34 AM
Brner is offline
Find More Posts by Brner
AMA16634...Just Me
That one works....

You may have already ran into this thread on here but here's the link just in case:

https://www.rcgroups.com/forums/show....php?t=1231310

Especially post 2....

Wishin' you luck.....
Old Mar 13, 2013, 07:14 AM
taz101 is offline
Find More Posts by taz101
Registered User
taz101's Avatar
Something that might interest some of you!
Landing gear now available at HK for Bixler,Bixler1.1 and Bixler2!!
Here:-http://www.hobbyking.com/hobbyking/s...Tailwheel.html

LURCH
Old Mar 13, 2013, 07:50 AM
u2builder is offline
Find More Posts by u2builder
Registered User
u2builder's Avatar
It is surprising that they didn't have a landing gear for it a long time ago.

I decided on a monowheel because I want to fly it FPV and figure with a conventional gear I am too likely to catch the gear and flip it.
Old Mar 13, 2013, 08:59 AM
robschonk is offline
Find More Posts by robschonk
Registered User
robschonk's Avatar
While we're at it, how about a RC4Y with factory floats? Interesting details on this one too: enclosed motor pod and prop, plywood internal frame, landing gear....

http://www.rc4y.com/rc4y-sky-surfer-...and-p-471.html
Last edited by robschonk; Mar 13, 2013 at 10:30 AM.
Old Mar 13, 2013, 09:10 AM
aeronca is offline
Find More Posts by aeronca
The figure "9" Specialist
aeronca's Avatar
Quote:
Originally Posted by taz101 View Post
Something that might interest some of you!
Landing gear now available at HK for Bixler,Bixler1.1 and Bixler2!!
Here:-http://www.hobbyking.com/hobbyking/s...Tailwheel.html

LURCH
Interesting find, but I question it's necessity. I'm sure some folks would like it for where they fly, but I have a hard time putting "standard" landing gear on what is essentially a powered glider. Where I fly most times, the gear and wheels on this plane, or similar ones like my Ver. 1.0 Bixler, would just be a sticking point on landings with plenty of unnecessary nose overs. I always will hand launch these birds, so won't be ordering the gear, although it is an interesting find.

Aeronca
Old Mar 13, 2013, 09:23 AM
u2builder is offline
Find More Posts by u2builder
Registered User
u2builder's Avatar
I am curious what the CG for the Bix 1.1 should be or what people are flying with: the manual says on the spar 71mm but a lot of information on the Skysurfer/Bixler says 60mm.
Old Mar 13, 2013, 01:00 PM
ajbaker is offline
Find More Posts by ajbaker
Argue for your limitations
ajbaker's Avatar

CG stuff


Quote:
Originally Posted by u2builder View Post
I am curious what the CG for the Bix 1.1 should be or what people are flying with: the manual says on the spar 71mm but a lot of information on the Skysurfer/Bixler says 60mm.
In my experience (with 3 SkyS's), 60mm=stable flyer. 70mm-A bit more aerobatic. Your choice. 60mm is the safest.
AJ
Old Mar 13, 2013, 08:29 PM
mrwaug is offline
Find More Posts by mrwaug
Registered User
The stock prop on my skysurfer v4 decided to come apart the other day on take off, it has never had any kind of damage so i think it just finally fatigued from vibration. I replaced it with the APC e6X4 and i am totally impressed. I had read about it in the recommendations, but have never got around to getting one. Defiantly a must do upgrade for anyone who hasnt done it yet. Best $4.00 i have spent on this plane.
Old Mar 15, 2013, 11:43 AM
taz101 is offline
Find More Posts by taz101
Registered User
taz101's Avatar

New motor mount!!


Hey guys, just thought I would show you this new motor mount for our beloved Bixler/Skysurfer!!
Here-:http://www.hobbyking.com/hobbyking/s...t_Upgrade.html

LURCH
Old Mar 15, 2013, 12:31 PM
aeronca is offline
Find More Posts by aeronca
The figure "9" Specialist
aeronca's Avatar
Quote:
Originally Posted by taz101 View Post
Hey guys, just thought I would show you this new motor mount for our beloved Bixler/Skysurfer!!
Here-:http://www.hobbyking.com/hobbyking/s...t_Upgrade.html

LURCH
Wish I could see that as a standalone, and not mounted to the plane - not sure what it really looks like - does it have the barrel for fitting into the motor's "cylinder" molded into the plane? The price is sure right!

Aeronca
Old Mar 15, 2013, 01:24 PM
taz101 is offline
Find More Posts by taz101
Registered User
taz101's Avatar
Quote:
Originally Posted by aeronca View Post
Wish I could see that as a standalone, and not mounted to the plane - not sure what it really looks like - does it have the barrel for fitting into the motor's "cylinder" molded into the plane? The price is sure right!

Aeronca
Look at the second picture!!

LURCH
Old Mar 15, 2013, 02:02 PM
aeronca is offline
Find More Posts by aeronca
The figure "9" Specialist
aeronca's Avatar
Quote:
Originally Posted by taz101 View Post
Look at the second picture!!

LURCH
DOH!
(thanks, Lurch...)

Aeronca


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Cyber Sky Parachute (Sky Surfer) shv2sail Aircraft - Electric - Airplanes (FS/W) 7 Aug 23, 2016 10:41 PM
Discussion Banana Hobby Sky Surfer Problems cavy92 Electric Plane Talk 59 Mar 23, 2016 09:10 PM
Discussion Sky Surfer nickwayne11c Electric Plane Talk 15 Nov 18, 2011 03:36 PM
Question Sky Surfer LiPo mod, help... Freight Dog Power Systems 0 Aug 17, 2006 02:45 PM
Swashplate Assembly with Center Ball; is this the swash with ball mod i want? tekforce Micro Helis 4 Feb 08, 2004 06:28 PM