RCMCHK - The R/C Motorcycle Club of HK - Page 3 - RC Groups
Thread Tools
Oct 22, 2010, 12:28 AM
Registered User
Quote:
Originally Posted by pile up
this at JV? I have a HOR in bits and wonder what I will need to get it up and running again. Will I need to modify the steering or use the stock one? I mean instead of the swing action change it to more like the real bikes. Thanks.
Yap, JV. don't mod the steering or you will need to run the crash bar.
Sign up now
to remove ads between posts
Oct 22, 2010, 05:40 AM
Registered User
Quote:
Originally Posted by ehirobo
Yap, JV. don't mod the steering or you will need to run the crash bar.
thanks. will I need any other mods? it's stock just now. thinking of bl but will I need new forks, rear shock, metal motor mount etc... with all that power? Or not necessary just for bling? Thx
Oct 22, 2010, 09:21 PM
Who needs 4 wheels..
Roofas's Avatar
If going brushless i would upgrade the rear sprocket & gearbox + gears. With the metal gears, make sure you put grease on them.
Oct 22, 2010, 10:10 PM
Registered User
Quote:
Originally Posted by pile up
thanks. will I need any other mods? it's stock just now. thinking of bl but will I need new forks, rear shock, metal motor mount etc... with all that power? Or not necessary just for bling? Thx
Don't really need the front forks. Just change the spring as the stock one is too hard and too long.... Yes, you need rear shock, rear swing arm, and metal motor mount is good too. Personally I prefer the plastic gears as they are smoother and quite. But the metal gears sure last longer. One thing very important is trim the fairing so the front wheel will not touch it at full steering lock.
Oct 23, 2010, 06:18 AM
Registered User
Roofas & ehirobo: Thanks for the tips. I checked the pile of bits and it appears that I must've upgraded the gears to the metal ones. Oh, also found some silcone rubber in the front tyre which I now remember doing. I even have these oval shaped spacers for the gearbox nip! Will look into the rear shock, metal motor mount and start some trimming. Will any of the TC shocks fit? I have some tamiya ones kicking around.
Oct 23, 2010, 10:24 AM
Who needs 4 wheels..
Roofas's Avatar
Kyosho actually have an alloy hopup Shock & I think 3 racing do as well. Not sure about the TC shocks.
Oct 24, 2010, 10:14 PM
Registered User
Quote:
Originally Posted by pile up
Roofas & ehirobo: Thanks for the tips. I checked the pile of bits and it appears that I must've upgraded the gears to the metal ones. Oh, also found some silcone rubber in the front tyre which I now remember doing. I even have these oval shaped spacers for the gearbox nip! Will look into the rear shock, metal motor mount and start some trimming. Will any of the TC shocks fit? I have some tamiya ones kicking around.
Yes, the tamiya touring shocks fits. Most people here use it. I think most 1/10 touring shocks should fit too. I am using shocks from my Edam 1/10 Spirit nitro as I have few of them as spare. And I almost forget the oval spacer, Which is a must if you go brushless or you will be replacing the frame very offen.
Oct 30, 2010, 01:42 PM
YOUTUBE - R/C Life Channel
kjohns0n's Avatar
hot racing works great, just my experience.
Nov 08, 2010, 11:43 AM
Registered User
Hi Pile_up,

Sorry, I an not logging so often, thanks ehirobo and roofas for answering the question. Your comments are great.

Last week, we have a new challenge :Carpet. We were quite worry about the traction before starting, well, it didn't as slippery as we image

2010仁濟慈善遙控車邀請賽 - MotoGP - Final 3 - 7-Nov-10 (0 min 0 sec)
Nov 08, 2010, 12:41 PM
Registered User
Fantstic !! you guys got so much skill to ride like that without crash bars and with a bike designed in the early 1990s! keep posting them I am a fan
Feb 22, 2011, 08:25 PM
Who needs 4 wheels..
Roofas's Avatar
Luv the Pics Bighead, especially the one with the riders on the side of track watching the bike
going down the straight.
Feb 23, 2011, 05:21 AM
Registered User
Yeah, your pics always bring a smile to my face
Apr 22, 2011, 11:06 PM
Registered User
a recent practice in ... rain

雨天[宜]玩電單車 (1 min 7 sec)



and Funday 2011 held on 16-Jan-11
The R/C Motorcycle Funday 2011 (11 min 16 sec)
Last edited by bighead; Apr 23, 2011 at 12:30 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale R/C Club Web Sites - New or Retooled upmm019 Aircraft - General - Miscellaneous (FS/W) 4 Apr 12, 2010 11:06 PM
Sold Estate Sale -- #2!!! Sales to benefit R/C club Garret H Non R/C Items (FS/W) 8 Mar 21, 2010 11:11 PM
Sold Estate Sale -- lots of items! Proceeds to benefit R/C club Garret H Non R/C Items (FS/W) 25 Mar 21, 2010 02:34 PM
Fly-In Float Fly - Corona R/C Club dbronst3790 Fuel Power Events 0 Sep 10, 2009 05:30 PM
Fly-In Float Fly - Corona R/C Club dbronst3790 RC Flight Events 0 Sep 10, 2009 05:29 PM