GAUI 330X S/500X Quad-Flyer Build Thread /Tips & Experience Share @ flying-hobby.com - Page 8 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Apr 26, 2010, 03:49 PM
DJI Supporter
Sid3ways's Avatar
Quote:
Originally Posted by Timbergrey
Hi Fung,
I have questions too. Have the 330X selectable Flight-modes and a additional angle delimitation for more Security with Camera on board? (no flips possible)
And is it possible to use stronger ESCs and motors with the 330X?


thanks
Timbergrey
Since they are standard PWM escs, I don't see any reason you couldn't scale this up as long as there is a gyro adjustment.
Sign up now
to remove ads between posts
Apr 26, 2010, 10:47 PM
Flying-Hobby
Quote:
Originally Posted by Timbergrey
Hi Fung,
I have questions too. Have the 330X selectable Flight-modes and a additional angle delimitation for more Security with Camera on board? (no flips possible)
And is it possible to use stronger ESCs and motors with the 330X?


thanks
Timbergrey
hi

yes there are 2 mode .

1. for sport fly
2. for beginner fly

fung
Apr 26, 2010, 10:48 PM
Flying-Hobby
hi

i think i need to take a sport fly video to show everyone

fung
www.flying-hobby.com
Apr 26, 2010, 11:54 PM
Z06 Tony's Avatar
Quote:
Originally Posted by fung
hi

i think i need to take a sport fly video to show everyone

fung
www.flying-hobby.com
Yes Yes a sport fly vid on 3s.
Apr 27, 2010, 12:12 AM
Registered User
Quote:
Originally Posted by frank76
@jamied: Choose a RX with 6 (or more) channels and use the free outputs for tilt, roll and future gps.
hi frank76
thanks for the answer.i meant to say will it have tilt and roll stabalized of the fc .
jamie
Apr 27, 2010, 03:57 PM
Registered User
Hi Fung !

I ordered one on 25.04.2010. My order number is 52457. Will it shipped early may, too ?
Is it equipped with an acceleration-sensor ?
Is it stable around the yaw-axis ?

Greetz, Frank
Apr 27, 2010, 04:59 PM
Registered User
Just another question: Are the props EPP 8x4,5 ? The original EPP0845 got a 5mm hole. are there any adapters to 3mm at the 330x ?
Apr 27, 2010, 10:15 PM
Registered User
wallaguest1's Avatar
Xaircraft X600 is not a much more valuable product?

Gaui 330 got just 3 gyros and its more expensive.
X600 got 3 gyros, and 3 accelerometers, and both computed are near to be an IMU, and is more cheap,

can any one tell me why you find 330 to be better than X600?
Apr 27, 2010, 11:04 PM
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Will see but it looks like the Gaui 330 actually flies and the X600 don't. but we will see.
Apr 27, 2010, 11:28 PM
Registered User
wallaguest1's Avatar
why it don't flyes? it does as far as i know

i dont get what you mean, sorry, english not my native lang
Apr 28, 2010, 12:19 AM
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
What i meant was, it seems more people are having trouble with it then people flying it, thats all.
Apr 28, 2010, 01:07 AM
Flying-Hobby
hi

First batch of the pre-order shipment will be around 15-MAY-2010. Second batch of the pre-order (start from 29/04) will be shipped at the end of MAY.

just waiting packing

fung
www.flying-hobby.com
Apr 28, 2010, 02:43 AM
Z06 Tony's Avatar
Quote:
Originally Posted by fung
hi

all parts will be carry too and first stock around 1-2 weeks as waiting packing

fung
www.flying-hobby.com
I knew your ship date was waaaaaaay off. You said 1-2 weeks on the 16th. That would make the shipment date between now and a few days. Now you say the 15th next month for the 1st batch????? What happened to 1-2 weeks. If I am not on the 1st batch preorder I want to cancell my order cus you were MISLEADING in your shipment estimates. I was gonna wait and order from my dealer here in the USA cus I dont like to order from out of the country. Then you came here and made all these claims you were gonna be the 1st to carry blah blah blah. You claimed 1-2 weeks almost 2 weeks ago now it is another 2 weeks or more. My order number is 52419. Please PM me to let me know if I am on the 1st or 2nd preorder. If not on the 1st preorder I will cancel and order from the U.S.
Apr 28, 2010, 02:52 AM
Flying-Hobby
Quote:
Originally Posted by Z06 Tony
I knew your ship date was waaaaaaay off. You said 1-2 weeks on the 16th. That would make the shipment date between now and a few days. Now you say the 15th next month for the 1st batch????? What happened to 1-2 weeks. If I am not on the 1st batch preorder I want to cancell my order cus you were MISLEADING in your shipment estimates. I was gonna wait and order from my dealer here in the USA cus I dont like to order from out of the country. Then you came here and made all these claims you were gonna be the 1st to carry blah blah blah. You claimed 1-2 weeks almost 2 weeks ago now it is another 2 weeks or more. My order number is 52419. Please PM me to let me know if I am on the 1st or 2nd preorder. If not on the 1st preorder I will cancel and order from the U.S.
hi

you are first batch. we are so sorry for the gaui packing delay.
if you want to cancel . can you send me mail marketing@flying-hobby.com ?

i wait your reply.

fung
Apr 28, 2010, 07:05 AM
Flying-Hobby
hi

i just got the parts list today and i will try to post on flying-hobby.com soon

fung


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion GAUI - Quad-copter kapteinkuk Multirotor Drone Talk 5 Apr 14, 2010 11:33 PM
Discussion New Gaui 200 SE V1 and DX6i owner fiercebadger Beginner Training Area (Heli-Electric) 0 Feb 25, 2010 03:59 PM
Wanted Want to Trade: New Gaui 200 canopy for old Gaui 200 canopy Splix Aircraft - Electric - Helis (FS/W) 1 Jun 28, 2008 02:07 PM
Quad-winged pager flyer snakeX2 Scratchbuilt Indoor and Micro Models 33 Jan 29, 2005 03:47 PM