Thread Tools
Old Jun 21, 2011, 11:23 PM
Blueshy is offline
Find More Posts by Blueshy
OSUFPV - KF7VFT
Quote:
Originally Posted by nakelp86 View Post
Hey guys need some advice on how to mount and keep together this camera
Sure. Here's what I did. It's not pretty but it sure works.
Sign up now
to remove ads between posts
Old Jun 22, 2011, 12:58 AM
Jaybee is offline
Find More Posts by Jaybee
SLO Flyer
Jaybee's Avatar
Blueshy, is that Sugru I spy?

Quote:
Originally Posted by Blueshy View Post
Sure. Here's what I did. It's not pretty but it sure works.
Old Jun 22, 2011, 01:07 AM
Blueshy is offline
Find More Posts by Blueshy
OSUFPV - KF7VFT
Quote:
Originally Posted by Jaybee View Post
Blueshy, is that Sugru I spy?
Actually no, its liquid electrical tape. The stuff has changed my life.
Old Jun 22, 2011, 01:15 AM
Jaybee is offline
Find More Posts by Jaybee
SLO Flyer
Jaybee's Avatar
EarthOrbiter,

True, there is a potential for noise to be generated by the switching-type converters. This is true for the step-up, and the UBEC which is also an DC-to-DC converter.

I'm using the 7A Turnigy UBEC, which seems to be pretty low noise. (tested on the scope here.)

The 3A Turnigy UBEC is also supposed to be good, and is the one Sander prefers.

Jaybee!

Quote:
Originally Posted by EarthOrbiter View Post
Hi Jaybee,
I have been doing some reading on the DC to DC converters.
Some can send RF noise to the UHF link.
It is a good way to isolate the video power but has possible drawbacks.
Old Jun 22, 2011, 01:24 PM
AdamChicago is online now
Find More Posts by AdamChicago
Whats the wrst that can happn?
AdamChicago's Avatar
I think this was addressed but not sure...if your VTx is a 12v then you can power it directly from the RVOSD without the need of anything else.

Quote:
Originally Posted by Jaybee View Post
Hey, all,

I'm currently sorting out the wiring on my Skywalker, looking to eliminate ground loops and such. I've drawn a diagram of the current setup, if it can be of use to anyone with a similar setup.



Also welcoming suggestions and/or feedback.

Jaybee!
Old Jun 22, 2011, 03:23 PM
octane81 is offline
Find More Posts by octane81
RTFM
octane81's Avatar
Ready to close ... extra strength motor mount
Old Jun 22, 2011, 05:07 PM
Jaybee is offline
Find More Posts by Jaybee
SLO Flyer
Jaybee's Avatar
Thanks, AdamChicago.

The VTx is a Lawmate running at 12V. However the EzOSD provides either 5V for a VTx, or you provide the power if you need 12V. It would be cool if it had 12V out, like the RVOSD.

Jaybee

Quote:
Originally Posted by AdamChicago View Post
I think this was addressed but not sure...if your VTx is a 12v then you can power it directly from the RVOSD without the need of anything else.
Old Jun 22, 2011, 05:22 PM
tom223866 is offline
Find More Posts by tom223866
Registered User
little flight with my skywalker, lawmate 2,4 500 and scherrer uhf

Skywalker FPV 1 (4 min 33 sec)
Old Jun 22, 2011, 05:42 PM
rabe2000 is offline
Find More Posts by rabe2000
Registered User
Hi Tom,
nice one, as usual
Old Jun 22, 2011, 07:54 PM
EarthOrbiter is offline
Find More Posts by EarthOrbiter
Fly Chitty Chitty Bang Bang!
EarthOrbiter's Avatar
Awesome combination of Altitude and Fence Jumping.
Old Jun 22, 2011, 08:32 PM
Cralis is offline
Find More Posts by Cralis
I love FPV!
Cralis's Avatar
How many C's would be recommended for a average powered Skywalker. I want a 5000mah pack... 20C, 25C, 30C?
Old Jun 22, 2011, 08:33 PM
Blueshy is offline
Find More Posts by Blueshy
OSUFPV - KF7VFT
Quote:
Originally Posted by Cralis View Post
How many C's would be recommended for a average powered Skywalker. I want a 5000mah pack... 20C, 25C, 30C?
At 20C with a 5Ah lipo you can pull 100 A (20*5). So 20c is more than fine.
Old Jun 22, 2011, 08:42 PM
Cralis is offline
Find More Posts by Cralis
I love FPV!
Cralis's Avatar
Thanks man! I'll keep that formula in mind. I'm not sure how it works out though. To me, the mah is the mount of petrol the tank can hold... So how does a tank with more capacity, effect the C (Which I am not sure what that represents, but I thought it was how tough a battery is...).

Wait, this is way off topic, so let me add ... Anyone else flying 500mah packs in their Skywalkers ?
Old Jun 22, 2011, 08:48 PM
Blueshy is offline
Find More Posts by Blueshy
OSUFPV - KF7VFT
Quote:
Originally Posted by Cralis View Post
Thanks man! I'll keep that formula in mind. I'm not sure how it works out though. To me, the mah is the mount of petrol the tank can hold... So how does a tank with more capacity, effect the C (Which I am not sure what that represents, but I thought it was how tough a battery is...).

Wait, this is way off topic, so let me add ... Anyone else flying 500mah packs in their Skywalkers ?
The C rating in your example would be the nozzle of the tank. If you keep the size of the tank and the size of the nozzle proportionally the same then when you scale up the size of the tank the size of the nozzle will also be bigger. C rating is just basically how much you can pull out of a battery at an instant as it relates to the total capacity of the battery.

Blues
Old Jun 22, 2011, 09:06 PM
EarthOrbiter is offline
Find More Posts by EarthOrbiter
Fly Chitty Chitty Bang Bang!
EarthOrbiter's Avatar
Exactly right it is how large of a diameter fuel line to an engine. A 20 C is plenty. Any larger would be like putting slicks on a model T.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Best plane for FPV while on vacation? patricklupo FPV Aircraft 24 Nov 23, 2014 04:56 PM
Cool FPV plane rescue with an FPV truck :-) AnthonyRC FPV Aircraft 17 Feb 24, 2008 11:45 PM
For Sale Skywalker plane and a bunch of extras moody07747 Aircraft - Electric - Airplanes (FS/W) 8 Sep 19, 2006 10:34 PM
Discussion Aviator Skywalker RC plane given to me moody07747 Electric Plane Talk 46 Sep 12, 2006 12:45 PM