Thread Tools
This thread is privately moderated by jesolins, who may elect to delete unwanted replies.
Apr 05, 2010, 10:04 PM
Tri-Quad-Hexa-Octo-copters!!
Thread OP
Discussion

My Quad Photos


I put a subject thread together for those interested:
Quadrocopter and Tricopter Mega Link Index
I intend to keep it updated.
Cheers,
Jim
"You can never have too many multicopter's!"

Here are some quads I've flown over the years:

Brushless Opti-Isolator OMM mod Draganflyer and a naked XUFO with X3d:


With quadro prop experiment:

https://www.rcgroups.com/forums/show...83#post8877986

Walkera UFO #4 Board and brushless Opti-Isolator mod:


Experimental Brushless Draganflyer V1 with my 100K gyro pot mod:

https://www.rcgroups.com/forums/show...51#post9967882

David's X-BL that I rebuilt and setup for him:

https://www.rcgroups.com/forums/show...16#post9729165

X-BL and Brushless Draganflyer:


X-BL/Funpilot:


UAVP:

https://www.rcgroups.com/forums/show...5#post10147079

UAVP with Spektrum 2.4Ghz:


UAVP and X-BL/Funpilot with Spektrum 2.4ghz

https://www.rcgroups.com/forums/show...9#post12428612

UAVX with GPS:

https://www.rcgroups.com/forums/show...7#post11961952

Mikrokopter V1.3 with NAVI and GPS:

https://www.rcgroups.com/forums/show...5#post13127388
https://www.rcgroups.com/forums/show...4#post13119645

UAVX:

https://www.rcgroups.com/forums/show...0#post12850976
Last edited by jesolins; Dec 24, 2010 at 01:47 PM.
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion My favorite Blade mSR mods, PHOTOS GALORE hydro_pyro Micro Helis 25 Sep 13, 2010 12:10 PM
Discussion My new Tamiya Tiger photos and video oztruck RC Tanks 9 May 20, 2010 12:59 PM
Discussion my first photos from above warthox Aerial Photography 8 Mar 20, 2010 04:41 PM
Discussion I made a camera gimbal for my Quad today. Tommygunn Aerial Photography 4 Dec 13, 2009 05:00 PM
Discussion My first home designed Quad IanJ Coaxial Helicopters 2 Nov 29, 2009 09:28 AM