Problem with lost phase on brushless motor
Can anyone help me please?
I recently had ongoing problems with continually losing one phase on my brushless motor, I took it apart, resoldered on the lead and it worked, however midflight the problem reocurred. I took it apart several times repairing it, and the leads have falled apart, now after two leads came adrift, and I cannot find where to resolder the leads, I am have soldered on new leads, but the motor tries to go forward and backwards and will not start, when it did start once, it squealed then some smoke appeared. How do I determine where to solder the leads back on, do I do some unwinding and locate the winding twist and solder onto these, the motor does not have a brand on it, it has 12 posts of winds. Could part of the problem be that I made the new leads much longer?
Please help, Mark!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||Problem with EMAX HL2215 450 Brushless motor||coeprobotics||Electric Motor Design and Construction||5||Apr 04, 2010 12:26 AM|
|Discussion||Problem with EMAX HL2215 450 Brushless motor||coeprobotics||Large Electric Helis||2||Apr 03, 2010 02:41 AM|
|Help!||Problem with EMAX HL2215 450 Brushless motor||coeprobotics||Electric Heli Talk||1||Apr 03, 2010 01:30 AM|
|Help!||Problem with EMAX HL2215 450 Brushless motor||coeprobotics||Multirotor Talk||0||Apr 02, 2010 05:02 AM|
|Help!||Problem with EMAX HL2215 450 Brushless motor||coeprobotics||Beginner Training Area (Heli-Electric)||0||Apr 02, 2010 03:36 AM|