Martin Mars Project - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 01, 2003, 12:16 PM
AMA 670207
Rudderman98's Avatar

Martin Mars Project


Well guys.
I was going to holdoff doing this thread until the plane was completed but what the heck.

I started construction of the Martin Mars from Ivan Pettigrew's plan in February. Construction started with the tail feathers and then halted for about 4 months and then resumed again in May. She is completely framed up to this point but there is still more to go. Wiring of the motors, servo's, and other electronics still has to be done along with LOTS of sanding and sealing for water op's.

I have approximately 80 to 100 hours into her at this stage (recent pic). Her stats are as follows:

Scale 1/20
Wingspan: 120 Inches
Length: 72 Inches
AUW: 10 pounds
Wing Area: 1515 sq. in.
Wing Loading: 15.7 oz/sq. ft.
Airfoil: Eppler 197 with NACA leading edge droop on outboard wing sections.
Power: Kyosho Mag Mayhems with 3.5:1 Master airscrew Gearboxes and 8 MAS 10x7 props notched at the center to make the 4 blade props. 18 cells of 1700 to 3000 Nicad/Nimh.

Ivan's plane is the Hawaii Mars for those of you who don't know of it. My plane will be the Philippine Mars. Both these aircraft are used as water bombers in Canada and are based at Sproat Lake.

She has been quite a project for me since this is only my third scratch built model. My first scratch built was Mark Rittingers Sportwin. Second was Anton Eisel's Seawind. I hope to have her flying by August for the Chilliwack Fly In in Canada this summer. I'll keep you posted on her progress and welcome any comments.

Perry

Last edited by Rudderman98; Jun 15, 2003 at 10:27 AM.
Sign up now
to remove ads between posts
Jun 01, 2003, 12:25 PM
AMA 670207
Rudderman98's Avatar
Pic 2
Jun 01, 2003, 12:27 PM
AMA 670207
Rudderman98's Avatar
Pic 3
Jun 01, 2003, 12:29 PM
AMA 670207
Rudderman98's Avatar
Ivan and his Mars
Jun 01, 2003, 12:35 PM
AMA 670207
Rudderman98's Avatar
Mars at Sproat Lake.
Jun 01, 2003, 05:54 PM
Scott Black, Montreal
sblack's Avatar
Was Ivan's plan published or did you get it from him through a personal association?

Lovely airplane. I would love to see (and hear) the real one someday. They won't be around forever.
Jun 02, 2003, 01:09 AM
H2OFLY
Wow - 120 inch span! Perry, you are Ambitious!

And I notice your wife does not get to park in the garage, as mine does not. : )

I am saddened in that my Canadair willnot be completed in time for the July 12-13 water contest at Pine Hollow, this year. So there is Next year, right?

Thanks for the "build-along" - it keeps my juices flowing

Terry
Jun 02, 2003, 02:29 AM
AMA 670207
Rudderman98's Avatar
[QUOTE]Originally posted by sblack
[B]Was Ivan's plan published or did you get it from him through a personal association?





Scott,
I purchased them from him directly.


Terry,
I just might have her ready for her maiden by mid July if all goes well. I was pushing for late August but it appears that I have built her faster than I expected. Looking forward to seeing your Canadair "in the flesh" sometime next year if not sooner wink, wink.

Waiting for the motors and gearboxes right now. After they arrive, then I can run all the wiring, closeup the leading edge sheeting, and do all the final finish sanding. Then to the covering and paint.
Viola'
Jun 02, 2003, 09:34 AM
Registered User
Gordon's Avatar
Quote:
Originally posted by Rudderman98

Scott,
I purchased them from him directly.
Hi Perry

Does Ivan sell a range of plans for his lovely planes? If so, where does he advertise?

Thanks

Gordon

BTW, thanks for running this thread - it'll be most instructive
Jun 02, 2003, 02:28 PM
AMA 670207
Rudderman98's Avatar
Quote:
Originally posted by Gordon
Hi Perry

Does Ivan sell a range of plans for his lovely planes? If so, where does he advertise?

Thanks

Gordon

BTW, thanks for running this thread - it'll be most instructive


Hi Gordon,
Ivan does sell his plans but I don't know for sure what plans he has for sale. He does not advertise and to contact him, you must email him. Contact me directly for more info.
Perry
Jun 02, 2003, 02:32 PM
Leave me alone!
Martin Hunter's Avatar
That's looking fantastic, Perry! Can I assume we'll see that out at Chilliwack next May? Or perhaps even August?

Martin
Jun 02, 2003, 02:37 PM
Registered User
RandyL's Avatar
Hurry up!! : ) Lookin' great!

Randy
Jun 02, 2003, 02:49 PM
CP140 NAVCOM
knight of Ni's Avatar
Perry, got some pics for yopu, but haven't had time to scan them yet. I'll get them off to you within a week.

Gordon, Ivan really doesn't sell his plans all that often, and only usually does it in person. He only does rough drawings, then does the rest in his head, and his construction techniques are "unconventional" throughout. Sorry to rain on your parade.
Jun 02, 2003, 05:09 PM
AMA 670207
Rudderman98's Avatar
Quote:
Originally posted by Dreamer
That's looking fantastic, Perry! Can I assume we'll see that out at Chilliwack next May? Or perhaps even August?

Martin

Martin,
That's the plan
I hope to have her done by the August fly in up your way. If not, she'll be ready for a full year of flying in 2004 and WILL be in Chilliwack on both occasions! Got to get the two Mars together for a fly. That would make a great photo shot now wouldn't it?


Mike,
I appreciate the pics. Just email them to me at bnfernau@msn.com
No rush.

Randy L.
I'm working on it buddy .
Perry
Jun 02, 2003, 06:50 PM
Scott Summersgill
smsgill's Avatar
Perry,

Hey, lookin great dude. Keep up the good work and be sure to take lots of pictures.

Later,
Scott


Thread Tools