Dec 16, 2012, 07:24 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Sign up now
to remove ads between posts
Dec 16, 2012, 07:35 PM
Against Helicopter Cruelty
Heli Pad's Avatar
Quote:
Originally Posted by shortfellow View Post
Thanks for the quick reply Heli pad. I have a v911 and it charges 2 batterys at once. So all I need is a cable that will connect to my charger and to my mcx battery. I can find a way to get each of these cables and connect them together but does anyone sell special cables like this that you know of? Buying one would be a lot easier. Tnx again. Vince
Try these. They are from US Warehouse. Less shipping cost and much quicker. I buy and use these all the time for my own battery hook ups.
Dec 16, 2012, 10:06 PM
Registered User

adaptor cable


Mike, thanks for your reply.
What I would like to buy is an adaptor cord that connects my V911 charger to my mcx battery. It would have a male connector on one end that connects to my mcx battery and a female connector on the other end that connects to my V911 charger. It's a long shot but I thought it was worth a try. Vince

Even better would be a USB port powered charger for my mcx batteries.
Last edited by shortfellow; Dec 16, 2012 at 10:13 PM.
Dec 16, 2012, 11:13 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by shortfellow View Post
Mike, thanks for your reply.
What I would like to buy is an adaptor cord that connects my V911 charger to my mcx battery. It would have a male connector on one end that connects to my mcx battery and a female connector on the other end that connects to my V911 charger. It's a long shot but I thought it was worth a try. Vince

Even better would be a USB port powered charger for my mcx batteries.
I've made my own patch cords for things that didn't exist or that I needed right away and couldn't wait on to have shipped. Pretty easy and only takes minutes if you've done any soldering before... just buy one of each thing if you don't already have them... cut them up and splice...

... just an option.
Dec 16, 2012, 11:40 PM
Registered User

usb port charger


Yeah, I'll have to start looking for the 2 cords if no one knows of a usb powered charger for the mcx batteries. Tnx for the reply.
Dec 17, 2012, 01:16 AM
Against Helicopter Cruelty
Heli Pad's Avatar
Just look for a link 3 posts above yours.
Dec 17, 2012, 04:58 PM
Registered User

charger


Thanks for your efforts guys. I found an E-flite 3.7 volt wall charger on ebay for
$12.00 free shipping. A no brainer..Vince
Dec 21, 2012, 09:16 AM
Registered User
frankbeagle's Avatar
Frank "WOOF" Beagle
Challenger Dealer
N797FB
http://frankbeagle.blogspot.com/
frankbeagle@hotmail.com
708-269-8057
Dec 21, 2012, 07:41 PM
Registered User
I broke the flybar in the first 10 seconds of its first flight.
Dec 21, 2012, 08:19 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by wrecklessralph View Post
I broke the flybar in the first 10 seconds of its first flight.
Power off immediately if you know you're about to hit something (for more reasons than just saving your flybar).

In the almost one whole year I've owned mine, other than skids, the flybar is the only thing I broke and only once. I lost sight of it when I flew it over and down behind some boxes so I goosed the throttle to get it back up to where I could see it... but it hit something down there on the way up... at close to full throttle... bad move... my own fault
Dec 21, 2012, 08:47 PM
Registered User
DoomsDay's Avatar
Quote:
Originally Posted by wrecklessralph View Post
I broke the flybar in the first 10 seconds of its first flight.
I have had that happen once. Its just bad luck as it really has to hit just a certain way for it to break off.
Dec 21, 2012, 09:18 PM
Which way is up?
stuball56's Avatar
On this heli, never broke more than a link. I can fly the heck out of this heli, if I do say so myself, lol. But with my MCPX I can hardly make it through a battery without breaking at least $5 worth of stuff.
Dec 22, 2012, 02:45 PM
Registered User
frankbeagle's Avatar

annual inspection


It was time for my annual inspection of my MCX2. Removed the body, used a fine hair paint brush to clean the dust, cat hairs, etc off everything. Cleaned the crud from the gears. Opened up the Tri-flow and lubed all the bearings, rod ends. Put it back together and flew 3 batteries worth. It is now nice and smooooth again.
Dec 23, 2012, 08:05 PM
Epilepsy Awareness
Chap1012's Avatar
Goofing around with the MCX. Wifey on the cam

MCX flight indoor (4 min 3 sec)


Mike.
Dec 24, 2012, 06:38 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Quote:
Originally Posted by Chap1012 View Post
Goofing around with the MCX. Wifey on the cam

http://www.youtube.com/watch?v=9bENBKp6HKw

Mike.


... merry xmas, bro

... and everyone


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Eflite Blade MSR Plus 2.4ghz Eflite Transmitter soaringcam Aircraft - Electric - Helis (FS/W) 4 Apr 07, 2010 10:27 AM
Sold EFLITE BLADE MSR+BLADE 400+DX6i dhmojo Aircraft - Electric - Helis (FS/W) 7 Mar 29, 2010 10:38 PM
Sold Blade MCX2 LNIB mgroves Aircraft - Electric - Helis (FS/W) 1 Mar 23, 2010 11:17 AM
For Sale Trade, eflite blades for eflite blades....Sell Blade CP Pro NIB with extras. kdill2160 Aircraft - Electric - Helis (FS/W) 1 Sep 02, 2006 09:28 AM
Alert Eflite Blade CX - 2nd Eflite heli jschenck Coaxial Helicopters 26 Oct 24, 2005 01:48 AM