Eflite blade mCX2 - Page 172 - RC Groups
Thread Tools
Dec 03, 2012, 05:06 PM
Epilepsy Awareness
Chap1012's Avatar
Never mind...done!
Sign up now
to remove ads between posts
Dec 03, 2012, 05:13 PM
Registered User
Quote:
Originally Posted by Chap1012
Never mind...done!
Exactly. Pheeew
Dec 03, 2012, 05:29 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by SR120 fan
I have already done it in a previous post and there was the same result. It was handy having that photo to look at. The problem happened before the wiring incident as I unplugged them trying to fix it so it is now almost definitely a motor problem which is a shame as they have hardly been used.
My Bad....
Dec 03, 2012, 05:30 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Fooling around with MCX2 #2 this afternoon......30mph gusts outside!++


BLADEMCX2 FDR (2 min 30 sec)
Dec 05, 2012, 06:08 PM
Registered User
It's snowing here! Hopefully my new motors should turn up tomorrow as they didn't today. Probably because of the snow. Then I will be back in the game and our new puppy better watch out! (Literally)
Dec 05, 2012, 06:55 PM
Which way is up?
stuball56's Avatar
Ha, snow for you in jolly ol' England. (lived there 3 yrs, Cheltenham) and here in Michigan, the "Winter Wonderland" we had 60 degrees F here yesterday. No snow yet this year!
Dec 05, 2012, 10:33 PM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by stuball56
Ha, snow for you in jolly ol' England. (lived there 3 yrs, Cheltenham) and here in Michigan, the "Winter Wonderland" we had 60 degrees F here yesterday. No snow yet this year!
Was there 1972-1974...stationed at Bentwaters RAF.... Lived in Ipswich!
Dec 06, 2012, 03:18 PM
Registered User
You guys are familiar with our lovely weather then lol I know Cheltenham because of the big horse racing festival that's there every year in March. It looks a very nice place to live. The only thing I really know about Ipswich is their football/soccer team.

It is looking very much like it wasn't the motors at all!! But the frame or something. The new motors turned up today and still no success. I wedged a screw driver in behind the culprit motor and it turned the gear so maybe the motor did get too warm and warped the frame or something wasn't quite right from the start? The other motor and mount is perfectly fine. Both the big gears look identical in size so I think it has to be the frame but I can't see anything seedy at all with it.
Dec 06, 2012, 04:20 PM
Registered User
frankbeagle's Avatar

Frame


Hit your local hobby shop and but a new frame. $4.95

When putting it together you will really get to know your MX2!!

Fly it for 5 mins only, and let it sit for 20mins before flying it again.

Ive been flying mine since it came out and the only thing I've had to change was a bent inner shaft when my cat swatted it!!!

Frank "WOOF" Beagle
Challenger Dealer
N797FB
http://frankbeagle.blogspot.com/
frankbeagle@hotmail.com
708-269-8057
Dec 06, 2012, 04:28 PM
Against Helicopter Cruelty
Heli Pad's Avatar
Quote:
Originally Posted by SR120 fan
You guys are familiar with our lovely weather then lol I know Cheltenham because of the big horse racing festival that's there every year in March. It looks a very nice place to live. The only thing I really know about Ipswich is their football/soccer team.

It is looking very much like it wasn't the motors at all!! But the frame or something. The new motors turned up today and still no success. I wedged a screw driver in behind the culprit motor and it turned the gear so maybe the motor did get too warm and warped the frame or something wasn't quite right from the start? The other motor and mount is perfectly fine. Both the big gears look identical in size so I think it has to be the frame but I can't see anything seedy at all with it.
So sorry to hear that the new motors didn't solve your problem. Perhaps it is a warp frame creating too much pressure on it after all. Sounds like you'll have the pressure of completely tearing your mCX2 down and rebuilding it from scratch. Good luck to you, sir.
Dec 06, 2012, 07:34 PM
Registered User
DoomsDay's Avatar
Quote:
Originally Posted by frankbeagle
Hit your local hobby shop and but a new frame. $4.95

When putting it together you will really get to know your MX2!!

Fly it for 5 mins only, and let it sit for 20mins before flying it again.

Ive been flying mine since it came out and the only thing I've had to change was a bent inner shaft when my cat swatted it!!!

Frank "WOOF" Beagle
Challenger Dealer
N797FB
http://frankbeagle.blogspot.com/
frankbeagle@hotmail.com
708-269-8057
I disagree with this. 20 minute rest? The motors are cold after only a couple minutes. I do agree on the flight time though. I run mine for 5 minutes and will let it rest a few minutes while I am putting the battery on the charger and then fly it again. I can do this over and over with all the batteries I got lol. Its not a long rest period that is saving it, its limiting the flight time that helps to keep the motors from over heating, But everyone has their own way of doing things. Parts are so darn cheap for the thing, I dont think it really matters if you beat the crap out of it and run it till lvc everytime. For the fun factor, its fairly cheap.
Dec 06, 2012, 07:38 PM
Scout CX | mCX2 | mSR | 120SR
North_of_49's Avatar
Yeah, about the length of a regular flight for a rest period is all that's necessary. 20 mins is kind of extreme... not necessary.

I fly mine 5 to 8 minutes but give it a bit of a break between batts... still on original motors almost a year later (with CF Tail Boom)
Dec 06, 2012, 08:28 PM
Which way is up?
stuball56's Avatar
Most of us have more than one heli. If you do, then like me you can fly one, let it rest while you take the other for a spin. That way you can have back to back flights without the overheating worries.
Dec 07, 2012, 02:00 AM
Jake From Planet Mascoutah, IL
Jake8131's Avatar
This is a long shot, but, the little collar that sits on top of the upper bearing only goes on one way...if you carefully look at it, there is a ridge on it...that ridge is supposed to make contact with the bearing...you may have yours upside down.



Uploaded with ImageShack.us
Dec 07, 2012, 05:36 AM
Registered User
Quote:
Originally Posted by Jake8131
This is a long shot, but, the little collar that sits on top of the upper bearing only goes on one way...if you carefully look at it, there is a ridge on it...that ridge is supposed to make contact with the bearing...you may have yours upside down.



Uploaded with ImageShack.us
Checking now sir


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Eflite Blade MSR Plus 2.4ghz Eflite Transmitter soaringcam Aircraft - Electric - Helis (FS/W) 4 Apr 07, 2010 11:27 AM
Sold EFLITE BLADE MSR+BLADE 400+DX6i dhmojo Aircraft - Electric - Helis (FS/W) 7 Mar 29, 2010 11:38 PM
Sold Blade MCX2 LNIB mgroves Aircraft - Electric - Helis (FS/W) 1 Mar 23, 2010 12:17 PM
For Sale Trade, eflite blades for eflite blades....Sell Blade CP Pro NIB with extras. kdill2160 Aircraft - Electric - Helis (FS/W) 1 Sep 02, 2006 10:28 AM
Alert Eflite Blade CX - 2nd Eflite heli jschenck Coaxial Helicopters 26 Oct 24, 2005 02:48 AM