EzUHF, the long range EzOSD companion, AVAILABLE NOW! - Page 106 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 18, 2012, 09:22 AM
Registered User

Which TX?


Quote:
Originally Posted by bracky72
The aurora has poor internal shielding. Expect problems with any lrs.
Thanks a lot for the headsup. I guess this system is designed to work best with Futaba, but until I pull the trigger on the 18MZ this spring I would like to use the EzUHF either on my Aurora 9 or Spektrum DX8. Can somebody help with connecting to these TXs for now even though I will be losing some range due to poor internal shielding? I could not find any info about using these TXs on the manual or on this thread...if its there sorry for reposting and please point me to the right direction.

Is Futaba really the best choice for this system?

Thanks.
Sign up now
to remove ads between posts
Dec 18, 2012, 01:56 PM
Registered User
On our a9 just pull the module off and go to the pins, left to right is ppm, pos, neg. Last two dont worry about. As far as signal quality i think ill continue to mount my tx away from my a9 as ive been doing with my tslrs... Id like a futaba but i have 6 parkflyera id need rx's for lol itll have to wait. Awhile
Dec 18, 2012, 07:46 PM
Registered User
Quote:
Originally Posted by hizlimax
Is Futaba really the best choice for this system
I use a JR 9XII with absolutely no problems.
Dec 19, 2012, 11:16 PM
Registered User
I dont have much of a choice on my new quad frame than to have my antennas about 3 inches away from my motors... Will this cause me any interference / trouble?
Dec 20, 2012, 02:15 PM
Registered User
heres a screen shot of my ppm numbers... Will this work? I cant get ppm to work in my tx setup on cc3d
Dec 20, 2012, 10:33 PM
Bazinga!
Moelich73's Avatar
Can you adjust it on your Tx? My 9x Tx value is 22.5 which works great.

Do you do any work on that pc? I just see games...
Dec 21, 2012, 12:30 AM
Registered User
Quote:
Originally Posted by Moelich73
Can you adjust it on your Tx? My 9x Tx value is 22.5 which works great.

Do you do any work on that pc? I just see games...
No work lol Just some gaming and heli tuning when the kids are sleeping....I have no idea if I can adjust the value, which one do u suggest I attempt to adjust. What menu do u do it in on your radio and Ill start digging around
Dec 21, 2012, 01:55 AM
Bazinga!
Moelich73's Avatar
As far as I know, it's only the Turnigy 9x with custom firmware where you can change the frame period in the Tx. If you have that, then look around in the general settings menu for the option.
Dec 21, 2012, 05:23 PM
Registered User
gottahunt's Avatar
Today my EZUHF had a major issue. I was out flying my quad and had already made two trips. I just put a new battery in and was about to arm the quad and take off when I noticed the Naza LED was indicating failsafe. Everything looked OK and so I cycled the power on my radio, the EZUHF Tx and my quad. Everything came back up green but immediately went back into failsafe on the quad. I took the 3S battery off my EZUHF and tested it. It was stone dead. I had just charged it. I took out my backup battery and installed it, powered everything up, green light on the Naza, then smoke from the EZUHF Tx. I pull all batteries, packed up and came home. There is no way to plug in a battery backwards. The connectors are keyed. Plus, the lipo I had on the EZUHF was fully charged this morning. Why would it go smack dead in two short flights. The EZUHF is only a month and a half old and the guys at ReadymadeRC have already been outstanding with the other Immersion issues I have had. Has anyone had this happen to your EZUHF?

Thanks,
Gotta
Dec 21, 2012, 11:28 PM
Registered User
out of curiosity, for the range test function. How do I establish a baseline? I cant find anything indicating say how far away i should get control.... I ran the interference wizard and worst case i go from 102db only rx to 97db ready to fly.... Seems decent
Dec 22, 2012, 03:13 PM
Registered User
Prblemo SOLVED, I assumed 25.b firmware was the latest... I upped all my gear to 1.29 and she works great!
Jan 01, 2013, 10:56 AM
Registered User
new video.

zii cloud SURFING. (4 min 9 sec)
Jan 01, 2013, 11:35 AM
Registered User
Nice one, what tx were u using. Diversity
Jan 03, 2013, 04:20 PM
Registered User
Hi,

How far are you guys getting with the stock antennas ?
Last edited by eduardokenithi; Jan 03, 2013 at 04:28 PM.
Feb 05, 2013, 12:22 AM
Registered User
I have all little issues solved but one. I still cant run spectrum analyzer or wizard on my win 8 laptop. On my desktop runnin win 7 its hit n miss, i can run it and let it refresh itself like 5 times then i get the cannot communitcate with ezuhf rx(1) or sometimes (2)

any thought. I on immersion usb uart on com 2


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Long Range UHF RC system now avail on STOCK thomasscherrer FPV Equipment 14323 Nov 10, 2017 05:57 AM
Discussion First FPV application for the iPhone, decode EzOSD Telemetry : Beta Now Available! ImmersionRC FPV Talk 107 Sep 09, 2011 10:37 PM
Discussion EzUHF, the full duplex long range link with FHSS and diversity ssassen FPV Talk 304 Feb 23, 2011 03:48 AM
For Sale Hitec Mini 6s Extra Long Range Receiver Flyin Brick Aircraft - General - Radio Equipment (FS/W) 1 May 22, 2010 10:54 PM
Discussion Your Long Range FPV Heli Dream Set Up ? djdaveq FPV Talk 2 Feb 26, 2010 01:55 AM