May 22, 2010, 10:06 AM
Registered User
XtremeWingRC's Avatar
Quote:
Originally Posted by Jurgen Heilig View Post
Just a matter of keeping the prop small enough.

The HET 2W-23 is recommended as a cheaper motor for WeMoTec's Minifan.

Jürgen
Yes this is true for the Wemotec fan, but its not just for a fan unit It is a good pusher since myself and the flying wing guys use them and the quality is pretty good. We "always" prop down when going HIGH in rpm in a hot wind motor. 4.75 x 4.75 would be the sweet spot

Its not that cheap, been using them for a few years and i have never smoked one yet. A lil cheaper alternative than a NEU motor, but better quality than an ARC motor.

casey
Sign up now
to remove ads between posts
May 22, 2010, 11:09 AM
Registered User
Jurgen Heilig's Avatar
Quote:
Originally Posted by XtremeWingRC View Post
...
4.75 x 4.75 would be the sweet spot

...
4.75x4.75" might be OK for the motor to survive, but for a "draggy" model like the FunJet, anything below 5" is really not very efficient.

Jürgen
May 23, 2010, 03:02 AM
Registered User
XtremeWingRC's Avatar
Quote:
Originally Posted by Jurgen Heilig View Post
4.75x4.75" might be OK for the motor to survive, but for a "draggy" model like the FunJet, anything below 5" is really not very efficient.

Jürgen

yes that is true, thats why for my wings we use 6 x 4 or a 6 x 5.5 for a lil more thrust, since the glassed wings need the thrust to push them effeciently.
May 30, 2010, 01:48 PM
Registered User
Hi all, just got the funjet ultra painted and the power set is on order. Can any body confirm if my lipo's will be up to the job and not too big,

Turnigy 3600 mah
3 cell
Discharge 20-30c - Will this be enough?

Thanks in advance
May 31, 2010, 11:00 AM
Registered User
XtremeWingRC's Avatar
yeah that 3600 will be enough, but you have to look at the other ingredients for a power setup.

You have to know your motor, what KV it is, how much power the motor can handle, prop size, esc and what amp esc size.

If your running a 3cell as you have a 3600, i can recomend a 115mph setup. The 3600 might be too heavy.

for 115mph Heres my setup:

3cell 1800mah 30C prolly can do a 3000mah pack
HET 2w-20 3300kv
4.75 x 4.75 prop
CC thunderbird 54 esc
AR6200 rx

Multiplex Funjet (2 min 46 sec)
Last edited by XtremeWingRC; May 31, 2010 at 07:28 PM.
Jun 02, 2010, 04:58 PM
Registered User
Nice vid

It's the Funjet tuning power set

Brushless motor C 3514-2980
MULTIcont BL-70 S-BEC speed controller
Propeller 6” x 5.5”

Thanks again
Jun 03, 2010, 04:43 PM
Registered User
XtremeWingRC's Avatar
thanx templemonkey. As soon as the ULTRA comes out im gonna go HIGHPOWER on that one. Hopefully 140's.

casey
Jun 09, 2010, 09:25 AM
Registered User
guyst's Avatar

Motor for FJ Ultra


I'm going to buy the FJ Ultra.
What setup from HC is recommended that will be similiar to MPX power set (~700W ~200Kmh) with 3S?
For best installation and preformance - Inrunner or Outrunner?
What size will fit best?

few options:
http://hobbycity.com/UNITEDHOBBIES/s...idProduct=4200
http://hobbycity.com/UNITEDHOBBIES/s...idProduct=8137
http://www.hobbycity.com/hobbycity/s...idProduct=5222

Others?
Jun 20, 2010, 06:40 PM
Registered User
just got tired of waiting for the u.s. shippments.
have mine coming from modelspot.
xtremewingrc,been watching your videos.and thanx for the info.
ive seen another video from you other than the one in post #95.
and the other video i cant find now,but in that video the plane looked much faster.

and you were only on the throttle maybe 20 secs.
can you list the power setup on that plane/video

sorry just found the video,speed scrolled over it many times.
i see that was on 5s.
shame the kit doesnt come with the alloy mount thou.
Last edited by rcairmike; Jun 20, 2010 at 07:31 PM.
Jun 20, 2010, 10:53 PM
Registered User
XtremeWingRC's Avatar
yeah that is a shame about the aluminum mount. I'll be making more videos. I am
xtremewingrc on youtube as well. so just type my name in youtubes search to get my vids or subscribe to to me.

casey
Jun 22, 2010, 07:58 AM
Registered User
Infante's Avatar
Hi all.
Here is the fotos of my funjet ultra.
Motor: XPower XA2815/3, 3000kv, 83g.
Battery: Bionic "Flight 30C/60C" 2200mAh 4S1P 14,8V
Flight Weight: 835G
Propeler: Graupner speedcam 6/5,5.
ESC: Extronic 80 amp.
bec: Ubec 3A.
Watts: 1100W
Amps: 72A

I will post a video this wekend.
Jun 22, 2010, 11:17 PM
Registered User
XtremeWingRC's Avatar
SWEET PICS INFANTE!! I bet that goes 140-150mph on that setup?

casey
Jun 23, 2010, 12:07 AM
CAP 232-aholic
DiabloKid's Avatar
Quote:
Originally Posted by Infante View Post
Hi all.
Here is the fotos of my funjet ultra.
Motor: XPower XA2815/3, 3000kv, 83g.
Battery: Bionic "Flight 30C/60C" 2200mAh 4S1P 14,8V
Flight Weight: 835G
Propeler: Graupner speedcam 6/5,5.
ESC: Extronic 80 amp.
bec: Ubec 3A.
Watts: 1100W
Amps: 72A

I will post a video this wekend.
sweet setup. I want one and want a 125mph+ setup as well
Jun 23, 2010, 01:44 PM
Registered User
Infante,
Can you provide some static prop/RPM/A/V/W data on this setup?
Jun 24, 2010, 03:57 PM
Registered User
Infante's Avatar
Quote:
Originally Posted by Proença View Post
Infante,
Can you provide some static prop/RPM/A/V/W data on this setup?
only got the info of the wattmeter:
1098W
72Amps
16,50v
I can tel you that it flyes very fast an also light setup.
is faster than the funjet ultra with the multiplex propulsion kit.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Funjet Ultra, more fast more fun.... tbmg1 FPV Talk 34 Jul 28, 2010 08:36 AM
Discussion Muliplex EasyStar WBFlyer FPV Talk 9 Mar 10, 2010 03:09 PM
Sold muliplex ASW 27 NIB bushpilotx1 Aircraft - Sailplanes (FS/W) 7 Aug 31, 2009 05:41 PM
Question Muliplex Alpha Junior Radio Instalation Allan Glover Sailplane Talk 3 Apr 09, 2004 01:37 AM
Muliplex MultiCharger 4010DC - is mine faulty ? borgs Batteries and Chargers 0 Jul 12, 2003 07:01 AM