Thread Tools
Old May 01, 2010, 03:50 PM
sheks is offline
Find More Posts by sheks
Registered User
Anyone know what the ratings are (Kv) of the motor in the recommended power-set for this?

Sheks
Sign up now
to remove ads between posts
Old May 02, 2010, 11:09 AM
Jurgen Heilig is online now
Find More Posts by Jurgen Heilig
Registered User
Jurgen Heilig's Avatar
Quote:
Originally Posted by sheks View Post
Anyone know what the ratings are (Kv) of the motor in the recommended power-set for this?
...
The last four digits reflect the motors Kv:

Himax C 3514-2980

Jürgen
Old May 02, 2010, 01:39 PM
Threshold is offline
Find More Posts by Threshold
Registered User
Threshold's Avatar
Mine is ready to go but the weather looks bad for the week ahead. How in the heck are you supposed to get the decals on that wing around the tail fins? There is no way I can do it, should have done it before sticking the fins in place. Underneath looks really tricky too.
Old May 03, 2010, 01:28 PM
Threshold is offline
Find More Posts by Threshold
Registered User
Threshold's Avatar
Finally got it done by making a template out of card so it looks ok now. Mine is 928grams 32.7 oz ready to fly.
Old May 03, 2010, 01:52 PM
Wilit run? 353 is offline
Find More Posts by Wilit run? 353
No such thing as overpowered
Wilit run? 353's Avatar
Yes you are right the weather has been foul! I noticed you live in london. Did you get to the rougham LMA show? I hear the weather was bad! I didnt have time to go, sadly!

do you have any pictures of your Ultra? (insides?)
Old May 04, 2010, 04:19 AM
Rajvirdee is offline
Find More Posts by Rajvirdee
Registered User
Hi Guys I got my Funjet Ultra a couple of weeks ago and love it !

Compared to the standard Funjet it is much stiffer and therefore much sharper in the air.

It feels more locked in and less floaty if you see what I mean.

I got the Ultra powerset and this this is very quick - I wasn't sure about it and was thinking of going for a 4 cell lipo powerset but can honestly say that it is as quick enough.

The guys at the club were amazed and you can pull some serious G with this thing without worrying!

It lands faster as you would imagine

I'm well happy with it...
Old May 04, 2010, 04:19 AM
wastegate is online now
Find More Posts by wastegate
Annoying people since 1970 :)
I went to Rougham and had a look at an Ultra on one of the stands. I still think white is a much better colour but the grey was Ok
Old May 05, 2010, 02:15 AM
Threshold is offline
Find More Posts by Threshold
Registered User
Threshold's Avatar
Quote:
Originally Posted by Wilit run? 353 View Post
Yes you are right the weather has been foul! I noticed you live in london. Did you get to the rougham LMA show? I hear the weather was bad! I didnt have time to go, sadly!

do you have any pictures of your Ultra? (insides?)
No I wanted to go but also did not manage it but plan to camp out at Wings and Wheels this year and make the most of it. The weather is better today and I managed to get off work so am hoping to maiden today. Here are some pix of it and the insides, I'm using the power set and pleased to hear it is fast enough, I also thought surely 4 or 5 cells is what you need for speed and an inrunner but I guess they are going for brute force to overcome the drag and you must get a lot of thrust this way and acceleration . The guys at my field are always going on about speed even using a radar gun and although I really only fly aerobatics I though maybe this will shut them up for a while









Old May 05, 2010, 04:13 AM
wastegate is online now
Find More Posts by wastegate
Annoying people since 1970 :)
Good pictures Threshold, I'm looking forward to the flight report.
Old May 05, 2010, 02:07 PM
Threshold is offline
Find More Posts by Threshold
Registered User
Threshold's Avatar
The maiden went very well, half throttle launch, I had a little to much reflex (up elevator) but 2 clicks of down and two clicks right sorted out the trimming. She does land a bit faster than the old Funjet and is quite a bit faster then my old one (with a Kontronic in-runner, 40amp ESC) and has very good acceleration, its really weird giving full throttle for a few seconds then pulling vertical and only a few seconds later throttling back to idle because its getting pretty small and then seeing it carrying on rocketing vertically with the motor off for another 50 feet or more. Normally I'm so used to a plane stopping quickly if its going vertical when you shut the throttle but this one just keeps climbing and getting smaller and smaller Very happy with it and now have the fastest plane at my patch
Old May 05, 2010, 03:12 PM
Wilit run? 353 is offline
Find More Posts by Wilit run? 353
No such thing as overpowered
Wilit run? 353's Avatar
Great sounds like a real performer!

Can anyone tell me more about the motor. What motor would fit nicely into the Ultra if i didnt buy the power set?
Old May 06, 2010, 03:03 AM
Threshold is offline
Find More Posts by Threshold
Registered User
Threshold's Avatar
There is lots of space behind the motor plate for any motor, outrunners or inrunners, remember you will have to order the ali motor plate separately.
Old May 07, 2010, 02:59 AM
funboat is offline
Find More Posts by funboat
Registered User
Looks great Threshold ! What battery are you using ?
Old May 07, 2010, 12:13 PM
GBR2 is offline
Find More Posts by GBR2
Stress Be Gone
GBR2's Avatar
What is the average flight time with the stock setup?
Old May 07, 2010, 04:24 PM
Smokescreen38 is offline
Find More Posts by Smokescreen38
Checking CG is for NERDS!
Smokescreen38's Avatar
Quote:
Originally Posted by GBR2 View Post
What is the average flight time with the stock setup?
An hour plus, on the slope.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Funjet Ultra, more fast more fun.... tbmg1 FPV Talk 34 Jul 28, 2010 09:36 AM
Discussion Muliplex EasyStar WBFlyer FPV Talk 9 Mar 10, 2010 04:09 PM
Sold muliplex ASW 27 NIB bushpilotx1 Aircraft - Sailplanes (FS/W) 7 Aug 31, 2009 06:41 PM
Question Muliplex Alpha Junior Radio Instalation Allan Glover Sailplane Talk 3 Apr 09, 2004 02:37 AM
Muliplex MultiCharger 4010DC - is mine faulty ? borgs Batteries and Chargers 0 Jul 12, 2003 08:01 AM