New Products Flash Sale
View Poll Results: Should this be stickied?
Yes 328 85.64%
No 55 14.36%
Voters: 383. You may not vote on this poll

Thread Tools
This thread is privately moderated by nick84, who may elect to delete unwanted replies.
Old May 06, 2010, 09:03 AM
LowClassCC is offline
Find More Posts by LowClassCC
Registered User
LowClassCC's Avatar
here is an rc10t i picked up here from a fellow member a while back and restored. this truck will be raced by my wife at our local track once install some electronics.

mod list

* Custom White Powdercoated Nose Plate
* Custom White Powdercoated Motor Plate
* Custom White Powdercoated Chassis
* Hand Cut Black Vinyl Cow Spots
* MIP Ball Bearing Steering
* Associated Carbon Transmission Brace
* Associated T2 Carbon Front Shock Tower
* Associated T2 Body
* Lunsford Titanium Hinge Pins
* RPM Black Ball Ends
* RPM Black Lower Spring Mounts
* RPM Black Adjustable Body Mounts
* RPM Black Narrow Front Bumper
* RPM Black Front Arms
* RPM Black Rear Arms
* RPM Black Center Link
* Low Class Chassis Tape
* JConcepts JC8 Narrow Front Wheels
* JConcepts JC8 Narrow Front Tires
* Jconcepts JC8 Rear Wheels
* Losi King Pin Rear Tires

before pics can be found in the original for sale thread. https://www.rcgroups.com/forums/show...ighlight=rc10t
Last edited by LowClassCC; May 06, 2010 at 09:11 AM.
Sign up now
to remove ads between posts
Old May 06, 2010, 07:24 PM
jettrooper02 is offline
Find More Posts by jettrooper02
jettrooper02's Avatar
That is awesome !!!
Old May 06, 2010, 10:54 PM
mredzadventure is offline
Find More Posts by mredzadventure
Kowalski !.....Options
mredzadventure's Avatar
SWEEET! Where did you get the powder coated chassis from That is great idea. So would that make it the RC10 T Holstein Edition
Old May 06, 2010, 11:20 PM
LowClassCC is offline
Find More Posts by LowClassCC
Registered User
LowClassCC's Avatar
thanks guys. i had the chassis coated at a local shop. i have had others done also. 2 flo orange, 1 flo pink, 1 candy blue.
Old May 06, 2010, 11:32 PM
mredzadventure is offline
Find More Posts by mredzadventure
Kowalski !.....Options
mredzadventure's Avatar
Quote:
Originally Posted by LowClassCC View Post
thanks guys. i had the chassis coated at a local shop. i have had others done also. 2 flo orange, 1 flo pink, 1 candy blue.
We have a local powder coater Was it expensive
Old May 07, 2010, 01:12 AM
LowClassCC is offline
Find More Posts by LowClassCC
Registered User
LowClassCC's Avatar
not really. especially when you compare it to what the original associated powdercoated chassis go for these days. it costs less than it would run to fill up a honda civic with gas. now i have hear some people say that their local shops were telling them over $50.. that's way too much to pay imo.

now anodizing on the other hand is expensive. average quote from all the shops i have contacted that do small parts have all had $125-150 min cost. but that is for a batch. so you can basically send in all the alloy parts for a blinged out vehicle and get everything done for the min price. i will be sending off a durango b4 prototype chassis along with 50+ alloy bits all to be anodized in the next few months.

i look at it like this. i am not a very talented driver. my driving skills on the track never look good. and after 20+ years racing i understand and am ok with my skill level. but with a stand out nice ride you look good no matter what your driving looks like. lol
Old May 07, 2010, 02:41 PM
nick84 is offline
Find More Posts by nick84
tater salad
nick84's Avatar
Quote:
Originally Posted by LowClassCC View Post
here is an rc10t i picked up here from a fellow member a while back and restored. this truck will be raced by my wife at our local track once install some electronics.

mod list

* Custom White Powdercoated Nose Plate
* Custom White Powdercoated Motor Plate
* Custom White Powdercoated Chassis
* Hand Cut Black Vinyl Cow Spots
* MIP Ball Bearing Steering
* Associated Carbon Transmission Brace
* Associated T2 Carbon Front Shock Tower
* Associated T2 Body
* Lunsford Titanium Hinge Pins
* RPM Black Ball Ends
* RPM Black Lower Spring Mounts
* RPM Black Adjustable Body Mounts
* RPM Black Narrow Front Bumper
* RPM Black Front Arms
* RPM Black Rear Arms
* RPM Black Center Link
* Low Class Chassis Tape
* JConcepts JC8 Narrow Front Wheels
* JConcepts JC8 Narrow Front Tires
* Jconcepts JC8 Rear Wheels
* Losi King Pin Rear Tires

before pics can be found in the original for sale thread. https://www.rcgroups.com/forums/show...ighlight=rc10t

awsome looking truck there!
Old May 07, 2010, 06:08 PM
mredzadventure is offline
Find More Posts by mredzadventure
Kowalski !.....Options
mredzadventure's Avatar
Quote:
Originally Posted by LowClassCC View Post
not really. especially when you compare it to what the original associated powdercoated chassis go for these days. it costs less than it would run to fill up a honda civic with gas. now i have hear some people say that their local shops were telling them over $50.. that's way too much to pay imo.

now anodizing on the other hand is expensive. average quote from all the shops i have contacted that do small parts have all had $125-150 min cost. but that is for a batch. so you can basically send in all the alloy parts for a blinged out vehicle and get everything done for the min price. i will be sending off a durango b4 prototype chassis along with 50+ alloy bits all to be anodized in the next few months.

i look at it like this. i am not a very talented driver. my driving skills on the track never look good. and after 20+ years racing i understand and am ok with my skill level. but with a stand out nice ride you look good no matter what your driving looks like. lol
Thanks for the info on that. I never thought about doing that before. I will have to look for an local powder guy and an anodizing shop.
Old May 07, 2010, 09:33 PM
LowClassCC is offline
Find More Posts by LowClassCC
Registered User
LowClassCC's Avatar
just be sure you make a note to tell them about the thickness of the coating. if it gets too thick things may end up not fitting. rc cars have tighter tolerances than the 1:1 car parts that powdercoating shops normally do. you just need enough to have a good solid color and not a lot of excess buildup.
Old May 07, 2010, 10:16 PM
mredzadventure is offline
Find More Posts by mredzadventure
Kowalski !.....Options
mredzadventure's Avatar
I could see how that could be a problem. Good to know Thanks.
Old May 10, 2010, 11:18 PM
jettrooper02 is offline
Find More Posts by jettrooper02
jettrooper02's Avatar
check out the new paint job on the slash, er, slark.
Old May 11, 2010, 07:56 PM
nick84 is offline
Find More Posts by nick84
tater salad
nick84's Avatar
Quote:
Originally Posted by jettrooper02 View Post
check out the new paint job on the slash, er, slark.

nice paintjob, going for the p-40 tiger shark look there?
Old May 11, 2010, 08:10 PM
mredzadventure is offline
Find More Posts by mredzadventure
Kowalski !.....Options
mredzadventure's Avatar
Good Job Jet! Very fun.
Old May 11, 2010, 10:45 PM
Stamp is offline
Find More Posts by Stamp
Visit My Blog
Stamp's Avatar
That looks pretty slick Trooper.
I see our good buddy is back.
Jim
Old May 11, 2010, 11:43 PM
jettrooper02 is offline
Find More Posts by jettrooper02
jettrooper02's Avatar
yep, p-40 exact. but i had the blue already, so now it's a traxxas slark.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show Us Your Ground Station !!!! FPV Ground Station Design and Idea's found here :) JettPilot FPV Equipment 4626 Yesterday 10:36 PM
Discussion Show us your night photo or video kestasxxx Aerial Photography 13 Apr 02, 2016 01:50 AM
Gallery Show us your model! Rube Goldberg Natchez Trace Bandits Model Aviation Club 5 Apr 23, 2010 01:22 AM
Discussion Show us your micro fleet fotowiz Micro Ready-to-Fly 2 Feb 04, 2010 11:41 PM
Discussion Show us your workspace JerryTodd Dock Talk 6 Oct 21, 2009 09:55 PM