Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 09, 2010, 10:10 PM
You down with EPP?
johnnyrocco123's Avatar
Quote:
Originally Posted by Madbob9
Just use a dremel with cut off disc.Put motor in ziplock type baggie.Push shaft through bag and cut.This way no filings get into motor.
Ok, what's the best dremel bit for the job? Sorry, I just got a dremel. I am a little behind
Sign up now
to remove ads between posts
Oct 09, 2010, 10:32 PM
DroneWorlds - TEAM NEW ZEALAND
jackosmeister's Avatar
Quote:
Quote:
Originally Posted by Madbob9
Just use a dremel with cut off disc.Put motor in ziplock type baggie.Push shaft through bag and cut.This way no filings get into motor.
Ok, what's the best dremel bit for the job? Sorry, I just got a dremel. I am a little behind
Oct 10, 2010, 11:50 AM
Tim Lampe; Hobbico R&D
KRProton's Avatar
If you have a Dremel kit that comes with the stone cutoff wheels they will probably work okay, but you have to be really careful because they're brittle. Something like this (link below) is best--a fiber-reinforced cutoff wheel. House of Balsa, DuBro and Dremel make them too.

http://www3.towerhobbies.com/cgi-bin...?&I=LXK381&P=7
Latest blog entry: Phoenix Q40 Classic
Oct 10, 2010, 04:36 PM
You down with EPP?
johnnyrocco123's Avatar
Quote:
Originally Posted by KRProton
If you have a Dremel kit that comes with the stone cutoff wheels they will probably work okay, but you have to be really careful because they're brittle. Something like this (link below) is best--a fiber-reinforced cutoff wheel. House of Balsa, DuBro and Dremel make them too.

http://www3.towerhobbies.com/cgi-bin...?&I=LXK381&P=7
That's the one I ended up using today. It cut it like butter.

Thanks guys. I can't wait to try out this motor with the Hyperions.
Oct 15, 2010, 09:17 AM
WATTSUP.SE
Jocke's Avatar
We are a few guys that will try the Rifle with Mega 16/15EDF 16/15/2 and Pletti Moskito 3, i guess there is no problem fitting these motors in the Rifle !? would HS-55 or Futaba 3110 be ok for this, anyone with experience using these servos ?
Oct 15, 2010, 09:01 PM
Registered User
Zimm98's Avatar
I got my 8$ hyperion inrunner it took a week to get here from Japan. The motor its self is a finned can and on my scale it weighs 78 grams. I hope to start the build soon, only thing is I need to decide if I want to work on this before I finish my 30%. I am kinda feeling the need for speed.
Oct 17, 2010, 10:39 PM
Registered User
Darkman17's Avatar
http://www.hobbyking.com/hobbyking/s...idProduct=4198


would this motor work? yes no maybe? what would be the best choice for a turnigy motor. power to weight ratio?
Oct 17, 2010, 10:49 PM
You down with EPP?
johnnyrocco123's Avatar
Quote:
Originally Posted by Darkman17
http://www.hobbyking.com/hobbyking/s...idProduct=4198


would this motor work? yes no maybe? what would be the best choice for a turnigy motor. power to weight ratio?
That motor will get too hot if you put a prop on it.

This motor will work with a 4.1x4.1 prop, I have used it

http://www.hobbyking.com/hobbyking/s...idProduct=4200
Oct 17, 2010, 11:37 PM
Registered User
Zimm98's Avatar
http://www.aircraft-world.com/shopexd.asp?id=2814 this is the motor I am gonna use in the 3400 kv version it was 2.50 to ship from japan and took only a week. Only thing is that ring around the motor shaft on the can is too large to fit through the hole on the motor mount so I got a some nylon bushing to stand it off so it fits.
Oct 18, 2010, 10:58 PM
Registered User
Zimm98's Avatar
well I just fell victim of the bad tail screws. Twisted the head right off, lucky i could get the stud out with out damage. Build is on hold till I can get to the LHS and get more screws. It seems like a good kit but I would be nice to have better hardware.
Oct 19, 2010, 11:31 AM
Registered User
marco_ul's Avatar
Quote:
Originally Posted by Zimm98
well I just fell victim of the bad tail screws. Twisted the head right off, lucky i could get the stud out with out damage. Build is on hold till I can get to the LHS and get more screws. It seems like a good kit but I would be nice to have better hardware.
Happend to me, but no way I could get the broken screw out without damaging the fuselage. I contacted the compagny and Electrifly will send me a new fuselage when they'll get back in stock. I had to send the broken screw and a letter explaining the problem.
Oct 19, 2010, 12:31 PM
Sure it'll work
Flyextreme's Avatar
Quote:
Originally Posted by marco_ul
Happend to me, but no way I could get the broken screw out without damaging the fuselage. I contacted the compagny and Electrifly will send me a new fuselage when they'll get back in stock. I had to send the broken screw and a letter explaining the problem.
At least it's good to know that they are taking care of it. Also, good to know that Esprit sells spare fuses/wings and stabs.

http://www.espritmodel.com/index.asp...D&ProdID=13017
Oct 19, 2010, 06:37 PM
Registered User
Zimm98's Avatar
I would like to give props to KRProton for offering to send me better screws. Its nice to see so many companies stand behind their products.
Oct 19, 2010, 10:53 PM
Registered User
Zimm98's Avatar
Update build is almost done, I went to check motor function spun it up and the motor mount twisted loose. I am now attempting to glue it back but I am worried about it holding. It seems as though I got a Friday kit, well if I get get her all tied up hopefully I can maiden by this weekend.
Oct 20, 2010, 05:49 AM
Tim Lampe; Hobbico R&D
KRProton's Avatar
I'm perplexed about these motor mounts coming loose. I'm sorry for the trouble some of you have had with this. I can understand how the firewall could come loose after a rough landing or something, but just spinning up the motor?

Well, it should be easy to repair. Pop it back into positoin--it should key in right back to where it was. Then just wick thin CA all the way around from the inside and outside-it should take only a drop or three on each side. Let the plane sit on its nose for a minute, then spray a LIGHT mist of CA accelerator down through the inside from the opening under the wing.

I've repaired a couple of these this way (from firewalls dislodged from a crash) and they have held for dozens (a hundred?) of flights after.
Latest blog entry: Phoenix Q40 Classic


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Lr-1 Pylon Racer New in the box thunderfrog Aircraft - Electric - Airplanes (FS/W) 6 Feb 22, 2010 09:53 PM
Discussion LR-1 Pylon racer New in the box thunderfrog Other Websites 0 Feb 09, 2010 08:26 PM
Sold CSD Twister Pylon racer kit - new in box SPasierb Aircraft - Electric - Airplanes (FS/W) 2 Nov 16, 2009 12:11 AM
FS: Flea sport / pylon racer - RTF kyril Aircraft - Electric - Airplanes (FS/W) 4 Mar 01, 2004 03:29 PM