Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 14, 2012, 01:54 AM
SupaTim is offline
Find More Posts by SupaTim
Owner/Operator at NorthWest RC
SupaTim's Avatar
Glad I made the drive up north today! Always worth the drive but I may have to quit flying for fear that I'll never be as silky smooth as Flop and his damn PAU...

Glad I got to fly Joe's guppy and was happy to get more landings on one tank than you'll get in the next 10! Hope you get the kinks worked out. 2.0 had a great time chasing snakes, and bangin the crack yak around. "Black Tim" and 2.5, always a pleasure.
Sign up now
to remove ads between posts
Old Jul 14, 2012, 02:06 AM
cryhavoc38 is offline
Find More Posts by cryhavoc38
Why didn't they run? A pass???
cryhavoc38's Avatar
opinions?
I'm thinking a mix of these suggestions, and a deletion of the Audi logo and the DSMX on the tail.
The DA will be a DA100L versus the 120

Better to do the EDGE on left wing and 540 on right versus the Edge/21 wing decals?
Not sure if I dig the checkered flag rip away effect.

Eric made a small mistake with the top of the wing coloring. The grey area is actually purple, but his color choice for the top wing graphics would still work fine.
Old Jul 14, 2012, 08:42 AM
xxD-Manxx is offline
Find More Posts by xxD-Manxx
Go Fly Yourself...!!
xxD-Manxx's Avatar
Cry.....

I'd go with the first one... Checkers ripping through are way cool!
D-Man
Old Jul 14, 2012, 10:36 AM
pro bro steve is offline
Find More Posts by pro bro steve
Registered User
pro bro steve's Avatar
Cry I would go with second one . My eyes need all the color on the wing tips far away the plane will look smaller using the checkers . The checkers ones look bad ass.

When you get it finished I will sell my EG MX 2 and buy it for Huckfest.
Last edited by pro bro steve; Jul 14, 2012 at 10:46 AM.
Old Jul 14, 2012, 10:51 AM
FlopGun is offline
Find More Posts by FlopGun
You brought two too many.
FlopGun's Avatar
So whos flying when and where today? I'm up for full day of GS fun. MARCs has the scale fly-in, that might be fun to check out.
Old Jul 14, 2012, 12:09 PM
racerxky is offline
Find More Posts by racerxky
Watts is where its at!
racerxky's Avatar
Quote:
Originally Posted by FlopGun View Post
So whos flying when and where today? I'm up for full day of GS fun. MARCs has the scale fly-in, that might be fun to check out.
Well, I want to get the 103 out and work on tuning the motor. I dont think we can fly anything non warbird at MARCs until after 3 but I could tinker with things for a few hours before that.

Is there is some place else we can go to fly gas?
Old Jul 14, 2012, 12:33 PM
flarpy is offline
Find More Posts by flarpy
Flarpy
flarpy's Avatar
Cry. Consider making it a little less symmetrical . Do a rip on one side of the wing. looks a little more realistic.
Ive found that it also makes it easy to know what side you're looking at.

Sharp plane either way.
Old Jul 14, 2012, 12:50 PM
gabrielisrael is offline
Find More Posts by gabrielisrael
Got the Slickness
gabrielisrael's Avatar
Quote:
Originally Posted by DFloth View Post
Cry.....

I'd go with the first one... Checkers ripping through are way cool!
D-Man
My family votes for the first one as well.

Is there a stock car with this coloring? Dman, what other schemes have these colors?
Old Jul 14, 2012, 12:52 PM
gabrielisrael is offline
Find More Posts by gabrielisrael
Got the Slickness
gabrielisrael's Avatar
Quote:
Originally Posted by FlopGun View Post
So whos flying when and where today? I'm up for full day of GS fun. MARCs has the scale fly-in, that might be fun to check out.
I plan on going out to check it out the scale fly-in at MARC around lunchtime, and then go back to the field this afternoon around 5-6pm.
Old Jul 14, 2012, 12:59 PM
FlopGun is offline
Find More Posts by FlopGun
You brought two too many.
FlopGun's Avatar
The MARCS Scale fly-in is for scale planes. Last I checked that includes Edges, Extras and such, Not sure about guppys.

I'm thinking catch the tail end of fly-in around 1-2 pm, then get all kinds of crazy 3D low after 3 pm when the red hats leave.
Old Jul 14, 2012, 01:10 PM
racerxky is offline
Find More Posts by racerxky
Watts is where its at!
racerxky's Avatar
Quote:
Originally Posted by FlopGun View Post
The MARCS Scale fly-in is for scale planes. Last I checked that includes Edges, Extras and such, Not sure about guppys.

I'm thinking catch the tail end of fly-in around 1-2 pm, then get all kinds of crazy 3D low after 3 pm when the red hats leave.
Ok, thats a plan. I'll be there at 1.
Old Jul 14, 2012, 01:14 PM
gabrielisrael is offline
Find More Posts by gabrielisrael
Got the Slickness
gabrielisrael's Avatar
Attention: 3D Flash Mob Alert for MARC this afternoon!!
Old Jul 14, 2012, 01:52 PM
Vitter is offline
Find More Posts by Vitter
Gas Monkey Vic
Vitter's Avatar
Quote:
Originally Posted by cryhavoc38 View Post
opinions?
Better to do the EDGE on left wing and 540 on right versus the Edge/21 wing decals?
Not sure if I dig the checkered flag rip away effect.
I think it looks good without graphics but for the two you posted I would go with the Edge / 540 graphics.

Quote:
Originally Posted by racerxky View Post
Is there is some place else we can go to fly gas?
Cascade Family Airfield
This is way better than MARC for big gas planes. No Red Hats, no trees, no crowds, no circle fliers.
Old Jul 14, 2012, 02:07 PM
racerxky is offline
Find More Posts by racerxky
Watts is where its at!
racerxky's Avatar
Quote:
Originally Posted by Vitter View Post
Cascade Family Airfield
This is way better than MARC for big gas planes. No Red Hats, no trees, no crowds, no circle fliers.
Thats starting to get tempting. Next weekend we should go check it out and hold the flash mob there!
Old Jul 14, 2012, 02:12 PM
Vitter is offline
Find More Posts by Vitter
Gas Monkey Vic
Vitter's Avatar
Quote:
Originally Posted by racerxky View Post
Thats starting to get tempting. Next weekend we should go check it out and hold the flash mob there!
when I get my gas plane that's the place I want to fly at.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 3DHS Aspera - p/u only, Seattle or Portland Earthbound Aircraft - Electric - Airplanes (FS/W) 1 Feb 26, 2009 08:16 PM
Cool seattle area pilots b36roxs Slope 0 Jul 26, 2008 01:32 PM
A Few Wood Built-up 3D Planes in the Seattle Area xwingnut Non R/C Items (FS/W) 4 Jan 07, 2008 08:12 PM
Sold Parkzone Typhoon 3D (Seattle area only) price reduced to $100 corsha99 Aircraft - Electric - Airplanes (FS/W) 3 Feb 04, 2007 12:44 PM
Seattle Area Pilots, lets fly this weekend Todd Long Electric Plane Talk 9 Sep 08, 2001 04:40 AM