Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 17, 2010, 12:49 AM
Ispintechno is offline
Find More Posts by Ispintechno
Defender of the park sky
Ispintechno's Avatar
Quote:
Originally Posted by NoFlyZone View Post
If you're looking to give the Trojan a kick in the pants, there's no need to go to 4s.

You want some stump pulling thrust? Stick on a GWS 11x7 HD prop on the stock motor and 3s Li-Po. Be prepared for a pleasant surprise...

Want some speed? Try an APC 10x10E prop; again on the stock motor.

Chuck
I assume that would work with the corsair stock components also? 11x7 sounds interesting.... actually both props do
Sign up now
to remove ads between posts
Old Mar 19, 2010, 11:36 PM
grem62483 is offline
Find More Posts by grem62483
Bradley

Brand New Plane From Horizon Hobby!!


I just got my plane back from Horizon Hobby. They didn't just replace the 25 amp Esc but they replaced the entire plane! The one I sent was crashed and I didn't know if it was because of the ESC or interference. I thought they were gonna call me and say that it was interference that caused the plane to crash so that they wouldn't have to fix my plane. I was wrong. The same day that my plane got to Horizon a new one was shipped back out to me. They did send it back without my battery, charger and receiver but I called and they shipped this stuff as soon as I got off the phone with them. I just wanted to write and let you guys know what Horizon did for me. I just thought that was really cool of them and especially nowadays, good customer service is hard to come by. So I got my new T-28 and now all I need to do is go get me a decent RX and TX. I wanna go with the 2.4 Ghz because the places that I fly have a lot of interference. Someone told me in this thread that the 2.4ghz system will solve that problem(or at least help it.) Gonna use the RX/TX that the Trojan came with on a project that me and my old man plan on building. Again, thanks for all the help and info you guys gave me.
Old Mar 20, 2010, 02:05 AM
grem62483 is offline
Find More Posts by grem62483
Bradley

Packing tape on my Trojan.


I ordered some tape from tape bros and did just a few small things to my plane. For those who don't know, I laid a checker pattern on the tail, Covered the elevators in red and put 2 red stripes outlined in black on the wings.What ya think? I could get really stupid with this tape and had to force myself to stop. I think thats enough for the top side of the ol'e gal. I have trouble seeing my plane and cant tell if its inverted or not. This should help.
Old Mar 20, 2010, 11:01 AM
NoFlyZone is offline
Find More Posts by NoFlyZone
Suspended Account
Quote:
Originally Posted by grem62483 View Post
I ordered some tape from tape bros and did just a few small things to my plane. For those who don't know, I laid a checker pattern on the tail, Covered the elevators in red and put 2 red stripes outlined in black on the wings.What ya think? I could get really stupid with this tape and had to force myself to stop. I think thats enough for the top side of the ol'e gal. I have trouble seeing my plane and cant tell if its inverted or not. This should help.
Very clean job! That's the way I like them personally.

Chuck
Old Mar 20, 2010, 12:03 PM
Ispintechno is offline
Find More Posts by Ispintechno
Defender of the park sky
Ispintechno's Avatar
Quote:
Originally Posted by grem62483 View Post
I just got my plane back from Horizon Hobby. They didn't just replace the 25 amp Esc but they replaced the entire plane! The one I sent was crashed and I didn't know if it was because of the ESC or interference. I thought they were gonna call me and say that it was interference that caused the plane to crash so that they wouldn't have to fix my plane. I was wrong. The same day that my plane got to Horizon a new one was shipped back out to me. They did send it back without my battery, charger and receiver but I called and they shipped this stuff as soon as I got off the phone with them. I just wanted to write and let you guys know what Horizon did for me. I just thought that was really cool of them and especially nowadays, good customer service is hard to come by. So I got my new T-28 and now all I need to do is go get me a decent RX and TX. I wanna go with the 2.4 Ghz because the places that I fly have a lot of interference. Someone told me in this thread that the 2.4ghz system will solve that problem(or at least help it.) Gonna use the RX/TX that the Trojan came with on a project that me and my old man plan on building. Again, thanks for all the help and info you guys gave me.
Another great experience with horizon, glad to hear it! 2.4G will eliminate interference. I've never experience even a single twitch with my AR500. Rock solid. The RX doesn't listen to anything but my TX.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Found Parkzone P-51 Brushless BNF or Parkzone T-28 Trojan CGReload Aircraft - Electric - Airplanes (FS/W) 3 Aug 10, 2009 10:55 PM
Discussion parkzone trojan t-28 esc keithn4 Beginner Training Area (Aircraft-Electric) 20 Jan 10, 2009 02:05 PM
Discussion parkzone T-28 Trojan esc? ggjj Parkflyers 1 Oct 08, 2008 06:48 PM
Sold Parkzone T-28 Trojan Parts. E-flite 25AMP ESC/Parkzone 480 Motor/2 Props/DC Carger CGReload Aircraft - Electric - Power Systems (FS/W) 7 Sep 03, 2008 05:35 PM
Sold Parkzone 480, 960kv motor for trojan t-28 la528it Aircraft - Electric - Power Systems (FS/W) 10 Apr 02, 2008 04:32 PM