Thread Tools
Old Feb 27, 2010, 05:23 AM
mapsyd is offline
Find More Posts by mapsyd
Registered User
mapsyd's Avatar
Discussion

Retracts for FMS P 51 mustang


Hi everyone. I am not sure if this has been covered and answered on here yet but I would like to have the retract servo for the FMS P 51 mustang sloweed down so that the look is more scale. Is this possible to do or am I just stuck with the " bang-bang" ....?

Has anyone found a way to slow the stock servo on this plane? I see that HL sells a slow down module, but have read that this may not work with limited range servos, is this true?

Love to hear from all you "modders" that have solved this issue.

This is a stunning plane and very, very scale. Can't wait to try it out soon.
Cheers
Sign up now
to remove ads between posts
Old Feb 27, 2010, 06:41 AM
LICobra is online now
Find More Posts by LICobra
Warbird Enthusiast
LICobra's Avatar
Quote:
Originally Posted by mapsyd View Post
Hi everyone. I am not sure if this has been covered and answered on here yet but I would like to have the retract servo for the FMS P 51 mustang sloweed down so that the look is more scale. Is this possible to do or am I just stuck with the " bang-bang" ....?

Has anyone found a way to slow the stock servo on this plane? I see that HL sells a slow down module, but have read that this may not work with limited range servos, is this true?

Love to hear from all you "modders" that have solved this issue.

This is a stunning plane and very, very scale. Can't wait to try it out soon.
Cheers
M...there's a thread dedicated to this P-51 and will answer all your modding questions. Giant FMS EPO P-51

https://www.rcgroups.com/forums/show...92043&page=163

To answer your question, use a servo slowdown module to slow down the retracts. It has been found that the stock servos do not have the strength to pull the gear up to a locked position with a slowdown module...as the torque decreases with the module. Stronger servos are in order for that mod.
Old Feb 27, 2010, 06:53 AM
mapsyd is offline
Find More Posts by mapsyd
Registered User
mapsyd's Avatar
Thanks for that. makes sense. So I would have to re install a stronger servo? sounds fairly easy just need to know how much stronger...
Cheers
Old Feb 27, 2010, 01:12 PM
LICobra is online now
Find More Posts by LICobra
Warbird Enthusiast
LICobra's Avatar
Quote:
Originally Posted by mapsyd View Post
Thanks for that. makes sense. So I would have to re install a stronger servo? sounds fairly easy just need to know how much stronger...
Cheers

M...Any slow down module will do, most use the Turnigy...about $8 from HobbyCity...as far as the servo you should be looking for over 50 oz in or
4 kg depending if you use metric !!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Mustang P-51, 1/48 Scale, Flaps, Retracts Martin SJ Scratchbuilt Indoor and Micro Models 44 Sep 05, 2011 03:08 AM
Discussion New 5-ch P-51 Mustang w/ Retracts Unboxing and Overview nitroplanes Nitro Planes 35 Mar 02, 2010 04:08 PM
Discussion p-51 mustang retracts? 57sailplane Electric Plane Talk 6 Jan 08, 2010 09:40 PM
Help! I need the CG for a PZ P-51 Mustang, the original brushed PZ P-51 mechengineer03 Electric Warbirds 2 Oct 13, 2009 12:27 AM