Thread Tools
Sep 03, 2012, 01:33 AM
Registered User
marell01's Avatar
That Viggen is 1:12 scale. Span is about 90cm, lenght 140cm. Wemo 90 fan on 6 cells. Almost 3 kg wright. Bare in mind, The landing gear is exceptionall on this model and The wing is extremely thin. Now need to do the profile 100% scale. Then it will be impossible to fit retracts.
Sincerely Marcus
Sign up now
to remove ads between posts
Sep 03, 2012, 06:44 AM
kin
kin
Composite factory
Quote:
Originally Posted by marell01 View Post
That Viggen is 1:12 scale. Span is about 90cm, lenght 140cm. Wemo 90 fan on 6 cells. Almost 3 kg wright. Bare in mind, The landing gear is exceptionall on this model and The wing is extremely thin. Now need to do the profile 100% scale. Then it will be impossible to fit retracts.
Sincerely Marcus
Are you mean i need make the wing airfoil a little thicker to let the space for the retract gear ?
Sep 03, 2012, 08:58 AM
Registered User
marell01's Avatar
Quote:
Originally Posted by kin View Post
Are you mean i need make the wing airfoil a little thicker to let the space for the retract gear ?
Correct. The landing gear on Viggen is very complex.








Scale 1:10 would be perfect. Around 1076mm wingspan (42") and 1640mm lenght (64,5")

Scale 1:9 Around 1190mm wingspan (47") and 1820mm lenght. (71") That is quite big
Sep 03, 2012, 11:28 AM
kin
kin
Composite factory
The cnc thing and scale struts is my strong !!!!!!!!!! i can say (easy for me ).Air-bus , Mi-31 ,Apache ah-64,Boeing 737 ,many many complicate thing have done before ! No worry it ! See the cnc support ! and the photo inside have more than 200 different landing gear , and full hand make boxer engines , each parts hand make here . the power is 20% higher than any market engines , power ratio is 1:1 ! the winner in market products !
Last edited by kin; Sep 03, 2012 at 11:42 AM.
Sep 03, 2012, 11:45 AM
kin
kin
Composite factory
this landing gear is same my oem models from setthrust.com Air bus landing gear . it need drive with a extend longer shaft for the inter-rotor , it is easy to solve the thin wing problem .I do the air bus landing gear is locate in the tailing edge . very thin profile .
Sep 03, 2012, 08:39 PM
MAAC SAVED RC!!
vettster's Avatar
Very Impressive Work Kin!!
Sep 03, 2012, 08:50 PM
Ldm
Ldm
Registered User
Ldm's Avatar
Dear Kin , excellent work !!!.
You have a great opportunity in the WW2 Electric airplane market .
All you have to do is make a phone call to LX Models , FMS models, Starmax models,
Change Sun and the rest !! Tell them you can make there retracts as they have failed in many respects to make good retracts for the WW2 planes .
They are inconsistent in quality and typically do not have a functioning gear leg.
Thanks
Lou
Sep 03, 2012, 09:53 PM
kin
kin
Composite factory
I know their quality , but no commen about them . but landing gear is very important for a good models , (DON'T DAMAGE YOUR MODEL WITH A BAD LANDING GEAR ). i will have time in WW2 model see my new version 1.6m P-51 , just the wing will have some thousand rivet , this photo is make today .and the open front hatch for ep version .
Last edited by kin; Sep 04, 2012 at 12:44 PM.
Sep 03, 2012, 10:02 PM
Ldm
Ldm
Registered User
Ldm's Avatar
Excellant , is that plane for your own use , or is that part of your future kit offerings ?
Sep 03, 2012, 10:19 PM
kin
kin
Composite factory
Quote:
Originally Posted by Ldm View Post
Excellant , is that plane for your own use , or is that part of your future kit offerings ?
it is the new products next month .
Full composite P-51D. 1.6M WIing Span Thousand,thousand , thousand.thousand....Rivet ,rivet rivet ,rivet ........crazy crazy crazy !
Last edited by kin; Sep 04, 2012 at 01:20 AM.
Sep 04, 2012, 04:37 AM
Ldm
Ldm
Registered User
Ldm's Avatar
Outstanding , cant wait to see the finished goods
Sep 04, 2012, 05:43 AM
kin
kin
Composite factory
Quote:
Originally Posted by Ldm View Post
Outstanding , cant wait to see the finished goods
(Finish!!!!!! Finished in the tree !) Just a fun video , it fly my Germany dealer , but it too happy and hit the tree ! but nothing damage , so that why i like it epoxy and full composite. it so strong . and landing very slow in first fly !
FlyFly MK products Full composite 1.6m P-51D funny fly and tree landing .mp4 (5 min 17 sec)
Sep 04, 2012, 06:15 AM
Registered User
Mikael's Avatar
Funny comment in video "just one Cow" lol
Not the best place to fly
Sep 04, 2012, 12:49 PM
kin
kin
Composite factory
for me here china the road less than 4-5 car pre min . it is a good flying site ! we have traffic control (my worker call stop stop the car .... aeroplane landing ..aeroplane landing . the car will stop for us and we can land .. it is china !
No problem .
Sep 04, 2012, 01:23 PM
Registered User
Who is that dealer in german?
Very easy to know, when we in europe like to order planes from you


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Recived my TF model/smartmodel LYNX DC3_driver Scale Helicopters 33 Jun 29, 2010 04:49 AM
Discussion Looking for test pilot for 3-D flying with Smartmodel/TF model narrow blades kin 3D Electric Heli Flying 4 Jan 19, 2010 07:42 PM
Discussion Looking for test pilot for 3-D flying with Smartmodel/TF model narrow blades kin Electric Heli Talk 2 Jan 19, 2010 12:03 PM