3DHS 42" AJ Slick
Round two with 3DHS. I had the 40" Edge about a year ago and I liked it. I was progressing well until I rammed it into the ground.. I'm definitely NOT a 3D guy but I do enjoy the challenge.
I tried to keep it as light as I could. Only one extension and it's 32awg. I soldered the motor's wires directly to the ESC. No shrink wrap on the ESC. Minimal hardware, all bolts and pushrods cut as short as possible, used as few washers as possible, etc. The motor and battery are heavy, everything else should be as light as possible.
*** SOLD 09/13 ***
AUW: 34oz w/ the 188g 2200mah pack and wheel pants ON
Static test: 340 watts
3D Hobby Shop:
42" AJ Slick
Park 480 1020Kv outrunner
30A Pro ESC
12x6 light electric wood prop
3s1p 2200mah 40c lipo
3s1p 1300mah 30c lipo
TM-14 2.4Ghz module
(2) HS-56HB servos (ailerons)
(2) HS-65MG servos (rudder, elevator)
Last edited by CyberJay; Feb 20, 2016 at 10:08 PM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||3DHS 42" AJ SLICK Wings Only + Landing Gear||AndyFly01||Aircraft - Electric - Airplanes (FS/W)||2||Feb 15, 2010 08:00 PM|
|Discussion||What motor for 3DHS 42" AJ Slick||jwilson32||3D Flying||13||Feb 04, 2010 09:25 PM|
|Discussion||delete||epoweredrc||Atlanta Area RC||0||Jan 18, 2010 11:59 PM|
|Sold||42" 3DHS AJ slick||Ducati Mechanic||Aircraft - Electric - Airplanes (FS/W)||11||Jan 18, 2010 05:13 PM|
|Sold||3DHS 42" AJ Slick BNF $250||dccdmd||Aircraft - Electric - Airplanes (FS/W)||10||Jan 03, 2010 10:50 PM|