*** Meet the Reapers, Titans, Gladiators and Hercs for combat or FPV*** - Page 58 - RC Groups
Thread Tools
May 12, 2011, 03:27 AM
Registered User
doggit's Avatar
this is the one i am going to use http://www.giantcod.co.uk/keda-thumr...-p-403686.html i have never used it so no comparisons, not even sure if it is similar specs
carl
Sign up now
to remove ads between posts
May 12, 2011, 11:49 AM
called into work, I'm AIRSICK!
JIMBAKER's Avatar
Quote:
Originally Posted by Lee
I was making an order this morning and was surprised the Turnigy 35-30A 1700 was not only out of stock but not backordering.

The motor that rctimer has is the only other motor I can find that has the same stats. Not good!!!!!

I like the 1700KV so I can use the same prop as the Assassin and Widowmaker.

We need your help. Please post any motor you have used that has worked well.

Lee
Lee,

I don't have the GR but this is what I am flying on my Titan http://www.graysonhobby.com/catalog/...tor-p-585.html
I am using 2200 mAh 3S batteries and a 6X4 prop so it is a little more prop noise. You could do the same thing with this motor and use a 2 cell battery and a 7X5 or 7X6 prop if you wanted the slower turning prop.

I used this motor http://www.graysonhobby.com/catalog/...jet-p-765.html on my Widow Maker with 1300 mAh 2S battery and using a 7X5 APC prop. Only problem is it doesn't give me much protection for the battery since a 2S had to be moved closer to the front to balance.

jb
May 13, 2011, 12:09 AM
Registered User
wheelspinner20's Avatar
I use this on my 29 oz. Polaris seaplane on 3s 1800mAh. Great motor, strong and dependable.... double check solders on bullet connectors before install.

Verticle no prob. but, its my impression that it will not handle a 7x6 prop. 6x5.5 is the highest grayson recommends. (its a generic copy of the suppo 2212-6 i think)

P
May 13, 2011, 01:04 AM
called into work, I'm AIRSICK!
JIMBAKER's Avatar
Quote:
Originally Posted by wheelspinner20
I use this on my 29 oz. Polaris seaplane on 3s 1800mAh. Great motor, strong and dependable.... double check solders on bullet connectors before install.

Verticle no prob. but, its my impression that it will not handle a 7x6 prop. 6x5.5 is the highest grayson recommends. (its a generic copy of the suppo 2212-6 i think)

P
Your right about it being a 2212-6 but it will spin a 7X5 or 7X6 on a 2 cell without a problem. So if your are wanting to built and fly light a 2 cell will help on the all up weight.

jb
May 13, 2011, 02:29 AM
Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
Does anyone else sell Turnigy motors?
May 13, 2011, 11:57 AM
Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
I found this motor.

http://www.plus2city.com/plus2store/goods.php?id=6591

What we are looking for is about 350 watts and 1700 kv
May 13, 2011, 12:09 PM
Full disclosure, not sponsored
JONBOYLEMON's Avatar
Lee, Doug @ MRS has a line on 1700 kv 400 watt motors. I will get more info, but they would be local and available for a great deal in qty's of 10.
May 13, 2011, 11:54 PM
Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
Quote:
Originally Posted by JONBOYLEMON
Lee, Doug @ MRS has a line on 1700 kv 400 watt motors. I will get more info, but they would be local and available for a great deal in qty's of 10.
You didn't let him go home tonight did you?

See what he can do please!!!!
May 14, 2011, 08:36 AM
I can fix it.
nageotte's Avatar

Motors


We already ordered motors from RC Timer, but for $4.00, OK $5.00 we will buy some more just to have around. Go ahead and get 100 of 'em and test them out for us.
May 14, 2011, 10:30 AM
Registered User
wheelspinner20's Avatar
Are there any reapers in the cape cod area? I will be vacationing there this year and would like to know some RC friendly sites, hopefully beaches.!

Pat
May 14, 2011, 11:28 AM
Registered User
bamabaxter's Avatar
Is this the same motor as the Turnigy?
http://www.rctimer.com/index.php?gOo...5&productname=
May 14, 2011, 12:01 PM
Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
Quote:
Originally Posted by bamabaxter
Is this the same motor as the Turnigy?
http://www.rctimer.com/index.php?gOo...5&productname=
YES!!!!

I added it to the shopping list.

Thanks!!!!
May 14, 2011, 02:43 PM
I can fix it.
nageotte's Avatar
Lee,

Your response shows a bit of excitement. That is the one we ordered. I see the C-clip groove on the end of the shaft so assume that we can drive the shaft through the motor. We'll find out.
May 14, 2011, 02:54 PM
Registered User
doggit's Avatar
for us in england and euroland i found this one, seems very similar http://www.modelaccessories.co.uk/dy...ess-motor.html
carl

ps, just ordered the RC timer version, it was cheaper with postage to the UK than modelaccessories was, very strange
Last edited by doggit; May 14, 2011 at 03:03 PM.
May 14, 2011, 07:01 PM
Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
The Turnigy 3530 1700 said it had -4 now it says 0. I wonder if some came in?

I'm ordering 4 of the motors from RCTimer and some replacement 4 mm E clips which I lost one of today.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Reaper GR60 Stagger_Wing Aircraft - Electric - Power Systems (FS/W) 0 Jan 13, 2010 02:43 AM
Sold Reaper GR 60 wrpsr1911 Aircraft - Electric - Power Systems (FS/W) 0 Jan 06, 2010 10:28 PM
Build Log House of Balsa "Grim Reaper" P51 Mustang Gun Jam Electric Warbirds 28 Dec 20, 2009 04:25 PM
Discussion Body count... Grim but it's really gotta be done. Bilbobaker Life, The Universe, and Politics 15 Nov 15, 2009 02:09 PM
Gallery Grim reaper Wickett R/C Pumpkin Contest 1 Oct 31, 2005 05:37 PM